I don’t care what people say about a taurus this is my everyday career pistol I have put around 2500 rounds through it Taurus has Never let me down brand new $275 came with 2 double stack 11 round mags extra grip I highly recommend Taurus to anyone
Good video. I just purchased my GX4. I wish it could be field stripped without a tool, but all in all, I like it. I haven't gotten it to the range yet because of winter weather. I found your video very informative on the takedown, clean, and lube of my firearm. Keep on keeping on bro
I just purchased one as well. I found you can use the back end of a 9mm round to turn the slide release that way you wont need a tool. Hope that helps.
Thank you for the awesome directions/cleaning demonstration video. I purchased my Taurus GX4 yesterday. Unfortunately, I did not notice that one of the magazines is defective and bullets will not go into the magazine. I have to call Taurus...let them know the problem, take whatever Taurus tells me to take over to Academy, and Academy will ship it to Taurus, then they ship it back to Academy, then I have to pick it up at Academy. It was a display gun and the last one they had. I did not want to wait for another shipment of the guns to come in because ... well...I didn't want to wait for God knows how long. Anyway, seems like a lot of rigga-ma-roll for a magazine (that is if Taurus responds). Last time I tried calling Taurus customer service they didn't answer, and I do not consider that good customer service (I have a G2 that I purchased 7 years ago).
Great video, I just this gun today, and as with any new gun I get I always clean and lube, before taking it to the shooting range, I also ordered the Viridian laser for it, since there was a $30 off coupon inside the box. Can’t wait to get to the range to put some rounds through it, if it shoots well then I will most likely pocket carry as my EDC. Thanks for the video enjoyed
Took mine to the range ran about 50-60 rounds , had no jams at all. Took it home took it apart and cleaned it put it back together , racked it and then it started jamming . Idk if I messed it up by cleaning it, Any advice ?
So I have one of these and I took it apart to clean it and I pulled the trigger pack out of the frame and some little bar spring looking thing fell out which I’m assuming is the spring for the slide release and I cannot figure out how to get it back on. Does anybody know where I can find a video to reassemble that trigger pack?
Thanks so much for the video, you made it look super easy! My husband (pictured to the left) just purchased this pistol for me to carry, and I am looking forward to getting more familiar with it. Curious where you're from...picked up a little East Coast accent LOL. Thanks again! - Carolyn V.
Not necessarily, you can clean it if it gets dirty but I dont think I’ve ever cleaned one. Most companies recommend you replace the recoil spring around 2,500-5,000 rounds.
@@TiberiousGib hi ..the barrel inside the gx4 says g3c thats normal in the barrels?? its inside a gx4..its short and normal size but says that..?? thanks
Running cheap 9mm (not reload, but cheap brass) through GX4, I had several failures to feed in which there was a small circular sliver of brass sticking out the top of the gun... Is this just maybe an issue of some part being too new, and needing some rounds through it?
Too much looky looky 👀 at me self promotion & glib. Tone down lil hopper, the subject is basic disassembly, cleanup, & back together. Using shell casing is not the proper fit and will damage the disassembly “plastic” pivot screw except in an emergency, which this isn’t one. Think professionally and act accordingly, then you’ll represent the shooting world much better. The novices can pet your ego and put lil clank in your pocket. I hear some Boston or Newark in that accent. Substance not hype, quit, subtle , relevant professionalism. Talk to them like novice friend needing guidance and useful knowledge minus the bs, then you’ll be more successful and helpful. Good or bad it’s out there now. Have someone that’s a real professional critique and edit your content for accuracy and relevance = success all around. Nuff said
You definitely deserved a like and earned a subscribe. Johnny B brought me to your videos and I don't regret watching them. You've got a new fan sir. ming.
I don’t care what people say about a taurus this is my everyday career pistol I have put around 2500 rounds through it Taurus has Never let me down brand new $275 came with 2 double stack 11 round mags extra grip I highly recommend Taurus to anyone
They’ve come a long way
@@TiberiousGib yes they have
Just got mine for everyday carry. Absolutely love this pistol. Made in Georgia, USA.
Dope
i just bought one of these pistols, glad you made a how-to clean video since i have a baby Desert Eagle i clean after every other range session
Thanks for watching
I recently purchased one of these pistols, lightly used. Thank you for the thorough & methodical video.
Thanks for watching
Thanks for the demo cleaning as I am a first time owner of the Taurus. Looking forward to your other videos.
Thank you for watching
I love watching pistol cleaning videos, I don't know why.
🤣🤣🤣 strange
Informative, common sense approach. Will follow this guy. Seems knowledgeable.
Why thank you 🙏
Thanks for making this video. This is my first time cleaning my firearm
Thanks for watching and commenting 🙌
Good video. I just purchased my GX4. I wish it could be field stripped without a tool, but all in all, I like it. I haven't gotten it to the range yet because of winter weather. I found your video very informative on the takedown, clean, and lube of my firearm. Keep on keeping on bro
Thank you
I just purchased one as well. I found you can use the back end of a 9mm round to turn the slide release that way you wont need a tool. Hope that helps.
The pull tab on your jeans zipper will work if you have nothing else.
You are going to use tools to clean it, so unless you are stripping it down to just look at it, a take down tool shouldn't be a problem.
Thank you for the awesome directions/cleaning demonstration video. I purchased my Taurus GX4 yesterday. Unfortunately, I did not notice that one of the magazines is defective and bullets will not go into the magazine. I have to call Taurus...let them know the problem, take whatever Taurus tells me to take over to Academy, and Academy will ship it to Taurus, then they ship it back to Academy, then I have to pick it up at Academy. It was a display gun and the last one they had. I did not want to wait for another shipment of the guns to come in because ... well...I didn't want to wait for God knows how long. Anyway, seems like a lot of rigga-ma-roll for a magazine (that is if Taurus responds). Last time I tried calling Taurus customer service they didn't answer, and I do not consider that good customer service (I have a G2 that I purchased 7 years ago).
Good luck !
Great video. I just purchased one. I got the one with the red dot cut out. I can't wait to get it.
Awesomeness 🙌
Great video, I just this gun today, and as with any new gun I get I always clean and lube, before taking it to the shooting range, I also ordered the Viridian laser for it, since there was a $30 off coupon inside the box. Can’t wait to get to the range to put some rounds through it, if it shoots well then I will most likely pocket carry as my EDC. Thanks for the video enjoyed
Thank you for watching 🙌
Are you happy with the veridian lazer? What color did you pick and why if i may ask
Do a video on how to put Trijicon sights on the gx4
Duct tape, JB Weld???
LMAO
Thanks that was helpful bro
Thanks for watching
Thx bro just picked one up this helped
Glad I could help!
Excellent video
Appreciate that!
Good video! Waiting on minds now!
Dope 🙌
Just wondering if you can take the chassis off the polymer frame? Looks like a modular frame design.
I actually haven’t tried.
See the GX4 review by fabi at Texas gun house.
I need this video thanks👍
Thanks for watching 🙌
I just bought this firearm the other day, should it be cleaned before its first fire?
Depends who you ask, I don’t think.
I would just lube it and go
Took mine to the range ran about 50-60 rounds , had no jams at all. Took it home took it apart and cleaned it put it back together , racked it and then it started jamming . Idk if I messed it up by cleaning it, Any advice ?
Try taking it apart again and lube it up, maybe link up with a local gun smith
When did you clean the barrel?
I think I ran a bore snake down it but this is an older video and I have a terrible
Memory
6:12
So I have one of these and I took it apart to clean it and I pulled the trigger pack out of the frame and some little bar spring looking thing fell out which I’m assuming is the spring for the slide release and I cannot figure out how to get it back on. Does anybody know where I can find a video to reassemble that trigger pack?
I would reach out to Taurus
Thanks so much for the video, you made it look super easy! My husband (pictured to the left) just purchased this pistol for me to carry, and I am looking forward to getting more familiar with it. Curious where you're from...picked up a little East Coast accent LOL. Thanks again! - Carolyn V.
THank you
Is you barrel marked gx3 on bottom
I don’t remember, this was just a loaner for the review.
I just bought one today.
The barrel is marked GX4.
mine is marked gx5
Mine is marked gx6 does anyone know why?
Liked and subscribed! Noticed you didn’t seem to do anything with the recoil spring? Do you recommend anything to do concerning the spring?
Not necessarily, you can clean it if it gets dirty but I dont think I’ve ever cleaned one. Most companies recommend you replace the recoil spring around 2,500-5,000 rounds.
hey some body have seen in the barrels say g3c but in gx4 ???
What?
@@TiberiousGib hi ..the barrel inside the gx4 says g3c thats normal in the barrels?? its inside a gx4..its short and normal size but says that..?? thanks
Thank you
Thank you for watching
From Puerto Rico, thanks
Thanks for watching 🙌
Running cheap 9mm (not reload, but cheap brass) through GX4, I had several failures to feed in which there was a small circular sliver of brass sticking out the top of the gun... Is this just maybe an issue of some part being too new, and needing some rounds through it?
That’s very possible, I would make sure it is lubed up and run another box to two through it. If the problem continues and send it back to Taurus
Just got my beauty! Thank you so much! I'm a subscriber!!
Thanks for subbing!
definitely prefer the “old” way of takedown.
Agreed, lucky I rarely
Clean my guns ha
Okay ik im dumb but i put it back together without anything inside the gun like the barrel and now its stuck and dont wanna come apart
Might have to call Taurus on that one
Mine is a year old, will not trigger reset!!! UPSET!
That stinks, you call Taurus?
I didn't pull the trigger when I disassembled it.
Possibly they changed the disassemble process or maybe it wasn’t necessary
🇺🇸 IS THE GUN SAFE IF IT WAS DROPPED? WILL IT GO OFF ? 🇺🇸
It has built in drop safeties, it’s not a Sig 🤣
@@TiberiousGib they have received that reputation🙈
Another pro video 👍🍀🇮🇪 #tacticaltoothbrush 😂
Thank you my friend
I bought one of these. I am a dead eye shot up to ten yards. After 25 yards, I can't hit a paper plate. I'm sure it's me and not the pistol.
Likely, maybe try to bench rest the pistol at 25 yards to double check
I never clean my guns. I use them till dirty and then give them away. That's why I don't own any guns ;-)
Solid logic 🙌
Way to fast in showing
Thanks for the input, I’ll try to slow down next time
Too much looky looky 👀 at me self promotion & glib. Tone down lil hopper, the subject is basic disassembly, cleanup, & back together. Using shell casing is not the proper fit and will damage the disassembly “plastic” pivot screw except in an emergency, which this isn’t one. Think professionally and act accordingly, then you’ll represent the shooting world much better. The novices can pet your ego and put lil clank in your pocket. I hear some Boston or Newark in that accent. Substance not hype, quit, subtle , relevant professionalism. Talk to them like novice friend needing guidance and useful knowledge minus the bs, then you’ll be more successful and helpful. Good or bad it’s out there now. Have someone that’s a real professional critique and edit your content for accuracy and relevance = success all around. Nuff said
Um…..no! This is my personality, not changing it.
You definitely deserved a like and earned a subscribe. Johnny B brought me to your videos and I don't regret watching them. You've got a new fan sir. ming.
Why thank you 🙏 Johnny B is the man