My Brova, ya video is HELLA IMPRESSIVE and definitely helped me burn my wide strips in my lawn. Wish I could show you a pic. Thanks for the simple directions my lawn is the BEST ONE on thr block from nothing but weeds.👍🏽👍🏽
Great video! A couple things to help the new striper if that is your thing...as you said - higher & healthy grass will stripe better...I like between 3.25"-3.75" in my northern climate. I find the best 'pop' is stripes that travel in the same direction as the sun moves - East to West. Go over each stripe two times (cut your lawn twice)...follow this pattern for two to three weeks/mows...then change direction (perpendicular or diagonal and repeat - this is to avoid rutting)...do when the grass is healthy and moist but dry to the touch and the ground is firm...have fun with it...
Make a striping kit at home easy and cheap with bungee cord, pvc pipe, super glue, crushed rock or anything heavy you can fill it with. Adds that little bit something extra that’ll make your neighbors jealous 😂
A striping kit would do the job, but my lawn stripes good without one. Plus, I don't see the average homeowner building a stripe kit. Even though its simple to us, it may be difficult to them. As long as they have the cutting pattern down and they want to take it a step further by adding one or building it, they can do so 👍🏾
Ha Ha!!! Good job man, I feel this is definitely harder than it looks! I do Double/ Singles and then screw it up! Maybe I’ll try this method…and before I start cracking the beers! 😂
Great job ! Can I give you a suggestion instead of going back down your second row lane try going down the middle of the two passes your stripe will be more defined give it a try thank me later !!
Hello J Will, I don't have an attachment, or do I own a stripe kit. What you're seeing is the reflection of some good turf. I did a video that shows you how I cut and how those stripes actually bleed into the lawn. I did this with my push mower and my commercial mower. Check it out when you get a chance. 👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾 ruclips.net/video/yR_bierf1Rg/видео.html
i feel what you are doing...but i am so confused with this one...????? i'll just keep watching...maybe its the border beginning that confuses me...(hmm!) :O)
Thank you. @@PoloFieldsLawnService i had to write it out on paper..wheww! i think its all about 4"s, 1 up 1 back(which is really 2 up - 2 back)--then remember to go over the 'up lane' again and the 'back lane' again...in its same direction to produce 2 lanes of 2...in other words you do go back over a lane to make it the same direction.? And, brother if you understand this, god does bless you. Thank you. As i want to try it this week....
@@PoloFieldsLawnService ok.. so i tried it out--i did see some results..it takes/took a few extra walk through s, and i had to remember what was up. and what was down..to match the downs to make 2 rows with the ups...if you get it...i think maybe,might,maybe i got it! :O) wheww!
@@PoloFieldsLawnServiceOK... i tried it out==i wrote what happened then computer glitch...it was confusing..it looked a bit diff. looked OK (i guess)--but i am not sure i did it right...seemed like a was walking over the same lane trying to remember the down lane and up lane...whewww!! geezz! :O) is there another way...like doing a lane. then walking around,the lawn to start lane 2 going the same way....sorry don't wanna waste your time brother??? thx
![How To Get Perfect Lawn Stripes GUARANTEED! [How To Tutorial]](http://i.ytimg.com/vi/9j4WVLxaRpY/mqdefault.jpg)
Step by step instructions for the people in the back. We Workin 💪🏾🌱!!!
Yes sirrrr 💪🏾💪🏾💪🏾
House looks clean. Car looks clean. Content is clean. Editing is clean. Dude is the example of the phrase “contentment will make everyone rich”
It's your world, I'm just trying to live in it 💯
Im obsessed with lush lawns that look like thick carpets! 😍 💚
You and me both 🙂
Since I'm the only guy that stripes my lawn in the neighborhood, I GOTTA try this! Super clean man! Beautiful yard!
Thanks Clay, they're definitely gonna look for sure 👌🏾
Can’t wait to try it. I’m going with 28-30in mower for BIG stripes.
@@timlee6794 LET me know how it goes 💪🏾💪🏾💪🏾
Good explanation. I just do single doubles since my yard is more on the smaller size. Same thing but faster
I do that every now and then as well.
WELL EXPLAINED we working 💪 here in southern TN 👏 🙌
Thank you, Freeman. I tried to make it as simple as possible 💪🏾
I've been fertilizing for 20 years... Your lawn is 👌
Thank you, Ryan 👍🏾
My Brova, ya video is HELLA IMPRESSIVE and definitely helped me burn my wide strips in my lawn. Wish I could show you a pic. Thanks for the simple directions my lawn is the BEST ONE on thr block from nothing but weeds.👍🏽👍🏽
Thank you. You can reach me on IG if you would like to share your pictures with me.
@@PoloFieldsLawnService what's ya IG name?
Polo Given Up The WHOLE GHOST!!! 💪🏾💪🏾💪🏾
🙏🏾🙏🏾🙌🏾🙌🏾
Great video! A couple things to help the new striper if that is your thing...as you said - higher & healthy grass will stripe better...I like between 3.25"-3.75" in my northern climate. I find the best 'pop' is stripes that travel in the same direction as the sun moves - East to West. Go over each stripe two times (cut your lawn twice)...follow this pattern for two to three weeks/mows...then change direction (perpendicular or diagonal and repeat - this is to avoid rutting)...do when the grass is healthy and moist but dry to the touch and the ground is firm...have fun with it...
💯💯💯
@@PoloFieldsLawnService great channel Polo! Very knowledgeable!
@kirkthebeerslinger Thank you, Kirk 🫡
That's the Pop, Polo! 👍🏿👊🏿
That pop pop 😆 Appreciate you, Raymond
Make a striping kit at home easy and cheap with bungee cord, pvc pipe, super glue, crushed rock or anything heavy you can fill it with. Adds that little bit something extra that’ll make your neighbors jealous 😂
A striping kit would do the job, but my lawn stripes good without one. Plus, I don't see the average homeowner building a stripe kit. Even though its simple to us, it may be difficult to them. As long as they have the cutting pattern down and they want to take it a step further by adding one or building it, they can do so 👍🏾
Welcome back Polo! 💪🏾🔥
Thank you, Christopher 👍🏾
Great info as always👊👊
Thank you, Fabian
Nice thick grass. That lawn is just screaming for some edging.
I know right 😆😆 I normally let the edges go when it gets super hot, and then I'll trim them back when the temperatures go back down.
Another good one bud!
Thank you, Gray Fox 💪🏾
Ha Ha!!! Good job man, I feel this is definitely harder than it looks! I do Double/ Singles and then screw it up! Maybe I’ll try this method…and before I start cracking the beers! 😂
🤣🤣🤣
Great video! Helped me out. Thank you
You're welcome 👍🏾
Your lawn looks impressive. What part of the Country does this lawn reside? No sign of any heat stress. Wow!
Thank you. Louisville KY, and it's blazing hot down here.
Great job ! Can I give you a suggestion instead of going back down your second row lane try going down the middle of the two passes your stripe will be more defined give it a try thank me later !!
Yes, this can be done, but I like themarks from the mower going down the center 👍🏾
great explanation
Thank you, mantooth 👍🏾
I appreciate the breakdown, thanks
Thanks Gregory 👍🏾
Good idea sir!
💪🏾💪🏾💪🏾
💯💪🏾👏🏾 thank you for this video
Your welcome 👍🏾
Can't wait to try this! Do always cut the lawn in this stripe pattern or do you switch directions occasionally? Great video as always 👏🏾👏🏾👏🏾⭐
I switch up my mowing patterns. I'm cutting it differently right now. I cut this pattern for maybe a month.
Thank you for responding. Have a blessed week!
@mbranche4234 No problem, and you have a blessed one as well
I noticed you didn't have a stripe kit but still made nice stripes. What exactly is the attachment that you used to make those stripes?
Hello J Will, I don't have an attachment, or do I own a stripe kit. What you're seeing is the reflection of some good turf. I did a video that shows you how I cut and how those stripes actually bleed into the lawn. I did this with my push mower and my commercial mower. Check it out when you get a chance.
👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾👇🏾
ruclips.net/video/yR_bierf1Rg/видео.html
Great job!!!
Thank you, David 👍🏾
We workin 👍
Yes sirrrr
TIght!
@@davidpittman106 💯
Interesting
🙂🙂
Excellence
👌🏾👌🏾👌🏾
i feel what you are doing...but i am so confused with this one...????? i'll just keep watching...maybe its the border beginning that confuses me...(hmm!) :O)
@TheTayedrums Try it out. It's easier to understand when you're actually doing it
Thank you. @@PoloFieldsLawnService i had to write it out on paper..wheww! i think its all about 4"s, 1 up 1 back(which is really 2 up - 2 back)--then remember to go over the 'up lane' again and the 'back lane' again...in its same direction to produce 2 lanes of 2...in other words you do go back over a lane to make it the same direction.? And, brother if you understand this, god does bless you. Thank you. As i want to try it this week....
@@TheTayedrums 😄😄😄 I'll just wait for your results
@@PoloFieldsLawnService ok.. so i tried it out--i did see some results..it takes/took a few extra walk through s, and i had to remember what was up. and what was down..to match the downs to make 2 rows with the ups...if you get it...i think maybe,might,maybe i got it! :O) wheww!
@@PoloFieldsLawnServiceOK... i tried it out==i wrote what happened then computer glitch...it was confusing..it looked a bit diff. looked OK (i guess)--but i am not sure i did it right...seemed like a was walking over the same lane trying to remember the down lane and up lane...whewww!! geezz! :O) is there another way...like doing a lane. then walking around,the lawn to start lane 2 going the same way....sorry don't wanna waste your time brother??? thx
Polo and Striperman know striping 💪👍💚🦸
Yes sirrrr 💪🏾💪🏾💪🏾
What a waste of time, energy, fuel ,etc etc etc.
@@matta6364 If you love what you're doing, why rush 👍🏾