I recently purchased and installed my MMD V2 and this video was very helpful. I really appreciate it’s aggressive appearance. I needed to work on the ground so I used two piece home made ramps from two 8’ long 2x12’s cut at 36 and 60 inches and concrete blocks. I braced the underside of the 2 by’s with a brick. I allowed enough clearance to back off the ramps but it was tight maneuvering under it during installation. It’s fitment was perfect. If you use this installation method, try not to drop your screws and pushpins in the grass. I put a shower curtain down because of fire ants and still had a hard time finding the ones I dropped due to the tight space. I can learn from other folks reviews and try to avoid running it into a curb, driveway or speed bump that appears too high.
Or speed, had mine for less than 10 days and it flew off on the highway at 100mph... Cleanest break on each side, proving the ABS used is too rigid/is shit because it literally broke due to the drag force of the air at higher speeds smh
@@joshuatatum1496 I hate to hear it Joshua. I’m not going to mention how fast I’ve driven with my splitter installed. This was after bumping it on driveways a couple of times trying to get across heavy traffic. Fortunately, there’s been very little cosmetic damage and it’s still hanging in there.
I still want to know why they are so expensive its just one plastic piece nothin special. I wanted a boss 302 splitter but charging $300 is just a rip off
So the way the splash shield mounts to the spoiler leaves huge gaps, I can't imagine it's good for aero or collecting filth from the road. This is dumb. The GT500 chin splitter at 170$ is a way better option!
Shop this MMD V2 Chin Spoiler: muscle.am/2YSaOrv
Subscribe For New Mustang Videos Daily: muscle.am/SubscribeAMyt
those 2013s are still so pretty from the front, a lot more than the current ones.. and i say that while waiting for my 2020...
I recently purchased and installed my MMD V2 and this video was very helpful. I really appreciate it’s aggressive appearance. I needed to work on the ground so I used two piece home made ramps from two 8’ long 2x12’s cut at 36 and 60 inches and concrete blocks. I braced the underside of the 2 by’s with a brick. I allowed enough clearance to back off the ramps but it was tight maneuvering under it during installation. It’s fitment was perfect. If you use this installation method, try not to drop your screws and pushpins in the grass. I put a shower curtain down because of fire ants and still had a hard time finding the ones I dropped due to the tight space.
I can learn from other folks reviews and try to avoid running it into a curb, driveway or speed bump that appears too high.
Or speed, had mine for less than 10 days and it flew off on the highway at 100mph... Cleanest break on each side, proving the ABS used is too rigid/is shit because it literally broke due to the drag force of the air at higher speeds smh
@@joshuatatum1496 I hate to hear it Joshua. I’m not going to mention how fast I’ve driven with my splitter installed. This was after bumping it on driveways a couple of times trying to get across heavy traffic. Fortunately, there’s been very little cosmetic damage and it’s still hanging in there.
Well done MMD you nailed it. That's a massive improvement from the stock chin spoiler!
I dont like how theres a space between the splash shield and the splitter. That kind of air at speeds can rip it off
God damn this car is sexy and I never say this about other cars
This splitter is flimsy and sucks it cracked in the first week of having it... MMD needs to bring back the V1 it looked way better and it was sturdier
is it painted black or made of black plastic?
what if you don’t have bolts or the factory split ty already in there
I still want to know why they are so expensive its just one plastic piece nothin special. I wanted a boss 302 splitter but charging $300 is just a rip off
It is because they all make money of shit made in China.
Yup. This and the rear decklid panels are WAYYY overpriced for what they are.
where is the one for 2010-12 ?
So the way the splash shield mounts to the spoiler leaves huge gaps, I can't imagine it's good for aero or collecting filth from the road. This is dumb. The GT500 chin splitter at 170$ is a way better option!
Someone please get this man a ruler.
Will this fit a 12 mustang??
This chin spoiler kit will not fit a 2012 Mustang, sorry! -Zach
This is not durable I’ve cracked mine repaired it and it cracked again on the slightest hit
Stop hitting shit
Garbage, lasted less than a year until it became debris on the freeway.
Lmao every single lip u can find elsewhere for way less American muscle ripping people off for years lol