Rustic Wood and Aged Metal Gate
HTML-код
- Опубликовано: 25 сен 2016
- I needed a gate to lock my chickens up when they're not free ranging, so I decided to go with a rustic / distressed metal and wood theme to go along with the surrounding old metal and wood look.
Please Like and Subscribe:
/ amodernmaker
Tools and accessories I used:
Lincoln 210 MP: amzn.to/2uQhgAY
Flap Discs: amzn.to/2RgNWuR
Welding Helmet: amzn.to/2uI2wnx
Angle Grinder: amzn.to/2FUB34g
Metal Cutting Saw: amzn.to/2spdspl
Plasma Cutter: amzn.to/2RhbyzI
Metal Patina: amzn.to/2NpS8HO
Dewalt Miter Saw: amzn.to/2FNhATc
Sander: amzn.to/36Ttmr2
Sandpaper: amzn.to/2QS523c
Bandsaw: amzn.to/30kJWxw
Bandsaw Blade: amzn.to/2RhDqUn
Poly Top Coat: amzn.to/30nWKTZ
Stain: amzn.to/2tlWPvb
Instagram:
/ amodernmaker
Facebook:
/ amodernmaker
Twitter:
@aModernMaker 
Хобби
Thanks for sharing and making it look so easy. I’ve built wooden gates my whole life and I just started incorporating metal into my woodworking shop. Your super easy to follow and watch. Just subscribed!!
Thank you! I think you’ll love adding some metal in with the wood, I know I sure do!
You are one great handyman great job brother God bless.
Thank you +larry navarro !
Love the gate - simple design but attractive and will last. Thanks for sharing. I’m off to build something similar.
Thank you Phil!
Badass gate! Nice work!
Thanks Jeff!
Nice and clean looking gate.
+Nitsuga Alliceva Very kind of you. Thank you!
Great job man! Real clean job!
Excelente serviço.
Just come across the video, very impressive gates, that looks quite easy make! Hopefully any way. 😁👍
Great video! It turned out really nice!
+SeabassVision Thank you!
Good gate!!! 👍👍👍
Thank you!
man, that looks great!!!
The gate looks BEA-UTIFUL!!!
Thank you!
flippin awesome job bro.
Thanks Growingwiser
Good job! 👍
Thank you! +Clemilsonccs
Chickens were giving you the stink eye at the end as you were walking out. Nice looking fence.
Thanks Dan.
Haha, yes they were... They want FREEDOOOOM!!
Very nice job. Well planned out. Looks like you have all the good tools. I especially appreciate you listing the tools and accessories.
Thanks! Glad you liked it. I’ve got a lot of the tools but not the set up to really streamline the process.
Great work looks good
Thanks 👍
Congratulations. Very good.
Thanks!
Nice job!
+Scott Turner Thanks, always nice to hear!
Nice job man.
+Troy Hoggard Thank you very much.
Nice work
Thank you.
Good job 👍
Thank you.
Awesome.
simple and nice
Thank you!
Best video 🔥🔥🔥. Make more
Thank you Jesse!
No hay nada mejor que poseer absolutamente todas las herramientas adecuadas!
Thank you!
good job..👍
Thank you
Very nice. If I only had the tools...
Start slowly acquiring tools..
very professional! Thank YOU! LIKE! LIKE LIKE!
Thanks!
very nice
Thank you
Good job dear
Thank you
I always marvel at guys who can cut accurate 45 degree angles free hand..
Thanks! I’m definitely not the greatest though...
People who don’t understand what fabricating for major clients requires “love this video” because of the artistic components which makes sense- and don’t see the CRITICAL flaw early on that in this case didn’t really matter, but it sends a horrible message to young or inexperienced welders/builders that could absolutely cause a major problem if you were building with HSS (it’s not called “square tube” btw...it’s called Hollow Structural Section) larger than the 2” in this video. YOU MUST ALWAYS MEASURE THE CORNER TO CORNER DISTANCE TO CHECK FOR SQUARE BEFORE WELDING THE FLAT SIDES OF THE FRAME. AT NO TIME SHOULD ANY PART OF THE FRAME BE MOVED FRON THE MECHANICAL ATTACHMENT UNTIL ALL SIDES ARE VERIFIED AND TACKED ON THE 3F and 1F POSITIONS. I have seen THOUSANDS of dollars in material and labor cut apart after a week of welding and fabricating because this simple step was not verified, and caused a deviating of 1/16 of an inch that rejected the part for a major household goods company in Cincinatti, Ohio. This isn’t hating on his video for those who might claim as such- it’s actually highlighting why it’s important for the experienced and skilled to police these forums and give praise where it is proper and revision where required. Nice gate.
Good Work
Thank you
as youre welcome....
4:36 - Put her in the thumbnail and you'll triple your views! That was a nice build too. Loved your plasma "drill".
Haha she loved that! +Nathan Johansen Thanks!
Hai xuân hình than thanh hiện
una bella ragazza :)
+Gregory Cecchin Thanks!
Really gorgeous! Sexy legs btw!
Love it!! That's one badass gate for chicken! hahahaaha!
+gradeez Thanks! Maybe just a little overkill... haha!
Two questions: why the 45 angle on the corners, is that for stability or aesthetics? Also what size are the screws holding the wood to the panels, They look like 1/2 inch panels and wondering if a 1/2 screw will hold it together. But it all looks awesome.
45’s are for aesthetics. Screws were 5/8” I believe and they’ve been holding up well so far. Thanks!
Luar biasa 👏👏 i like
Thank you!
wow tenkiu eees grande
At least the Lady is still presenting herself in an attractive manner.
Thanks, I’ll let her know
Nice effort man. You should have welded a square tube mid rail to help brace it. As you hadn't, you would have been better installing the wood with the gates on your table, that would have helped with sag as the wood would help brace it. Also, don't fully weld a corner without tacking the whole frame together, otherwise you'll struggle to keep the gate square. Nice tools too
Thanks for the tips +Benjamin Button!
FELICIDADES MUY BONITO, MI TRABAJO ES DE OTRO TIPO, PERO TAMBIEN ME GUSTA TRABAJAR EN MI CASA Y TRATO DE HACER COSAS, Y AHORA ESTOY TRABAJANDO EN UN PORTON COMO EL DE UD.
Gracias. Buena suerte!
Cuánto salio todo
Nice gate. Can I use an angle grinder to cut the thin strips of metal
that's exactly what I need only I'm making it 92 inches tall with a crossbeam for added support. my only question is I don't have concrete slab, I was wondering if I could set post on ground with concrete mix. or should I set a it attached to a footing?
+Gilbert Matty It should be fine if you set the post nice and deep. Are you going to add a wheel on the long side?
Kiko dice: uyy así que fácil.
great work. love the detailed view, and your attention to detail. Im looking to replace my old broken wooden 11' gate, in phoenix, az, usa. Any chance you got time for me?
Thank you! I wish I could but I have zero time available right now...
Whats your welder wire feed and voltage set at?
I can smell the welding lol
Vinegar and wool will give you that stain,I'm comfused?
Excellent. How did you attach the wooden timbers? I can see they are being held but I’m not totally clear how!
Just with screws.
A Modern Maker haha thanks. A 9 month wait but worth it :-)
Sorry about that 😬
all that effort for chickens
Haha. It was actually practice for making a new front gate.
Great job! I love how you edit your videos! Diresta inspired?
Thank you +VivaLaCody1! Yes, Diresta inspired.
What sizes for metal did you use?
Love the video and gate! Question...how wide was your opening and how wide was your gate you built? I'm building one soon and would like to know the space you left on the ends for the hinges.
Thank you! The gate was 9 feet wide total. 1/4” gap between and about 2” on each side.
Also i m a wood worker who would love to learn more welding, I have very limited metal work. I would have made costume tongue and groove floating panels...
I'm sure that would look great, but would be way more work than I wanted to put into a gate for chickens.
Great video. What do you all use to prevent a steel gate from rusting? I was thinking of powder coating mine after I weld it up. Any better suggestions?
Powder coat or plan on painting periodically. I don’t mind the rust though for that gate.
What size metal pieces did you use?
Can a beginner do this if I learn how to weld?
Beautiful gates! Now all you have to do is knock down the entire fence and do it to that. Easy peasy.
Thank you!
I'm trying to replace the wood on a driveway gate that's made just like this. What kind of wood did you use or would you recommend that I buy? I've never really worked with fencing like this so I'd appreciate any tips on what I should be asking for at the lumber yard. I'm going to have to get it cut there too. Great job with this video, thanks.
I used cedar planks. Holds up well to weather and bugs. Redwood should be good too.
That turned out great, nice job... now for the chicken wire fence next to it?
Thanks! Yeah... That is very low on the priority list but it does need to get done! Hopefully soon.
I know what you mean. I'm always 10 tasks behind.
Same here +Jack Of All And I've got a wedding coming up in a couple weeks and still have a ton of stuff to build for it!
goood✌👌👏💖
+Ali Afreet thanks!
where do you get these large metal fence posts
+Abu Kareem At a metal supply yard/retailer, or you can buy them online.
Great work! What kind of wood sealer did you use?
Thank you! It was Thompson’s wood sealer. Still holding up well.
Fantastic work! Are you going to do more videos like this soon?
+Best Access Doors Thank you! Hopefully in the near future!
Can you please tell diameters for square bars..thanks
Hola,me encantó éste trabajo,es justo lo que necesito para mi patio.Quiero saber que tipo de tornillo usaste para afirmar las tablas.Tengo mi reja de metal que dá a la calle con madera, pero la llenaron de tornillos 🤦 Saludos desde Chile 🇨🇱
Use tornillos para sheet metal, pero puedes usar qualquier tornillos si caben.
What size of metal did you use.
What is the size and kind of wood you used for the frame?
Tanks my brother
Standard fence pickets. 5/8” thick, ripped to appropriate width and cut to height.
Hi, what type of wood and thickness did you use?
Thnx
Cedar planks, about 5/8" thick
No fence just gate 😂
What is the size and kind of metal you used for the frame?
1-1/2” mild steel tubing
What size tubing did you use for the frame?
1.5” I believe
What "Patina Stain" did you use? I like the way it turned out. Great job!
+Randy Davis Thanks Randy! It's called Black Magic by Sculpt Nouveau.
Will have to give that a try!
+Randy Davis If you have any question, let me know!
Randy Davis
What size RHS was used to frame the gate?
1.5"
What size wire did u used?
What machine is that?
Gas? Ect...?
Thanks man
+X2DaA 503 I think it was .035, Lincoln 210 MP, CO2/Argon gas mix.
size: 128375638359322090.2
machine: *%$@
Gas: Gross - Grow up man.
what type of wood is this?
What type of wood did u used?
Hi bro I m from india and I want to built this type gate.will it be safe in rainy season and wt camical can we use to protect from sun light and rain.
Hey. Yeah just make sure you have a good clear coat on the metal and some sort of water seal on the wood.
I noticed that you have a plasma cutter (I want to get one soon too). Why do you not use it to cut your angles instead of the bandsaw? Are the cuts too sloppy with a plasma cutter? Awesome build btw!!!
Thank you! I used square tubing which is faster to cut with a bandsaw. With a plasma cutter I’d have to cut all 4 sides.
Nice... did you used a stainless tubular or galvanised one? and also the flat bar?
Just painted mild steel
The step at the foot is dangerous
Very nicely done. Can you give an estimate of material costs? I’m trying to decide if it’s less expensive to build than to buy. Thank you.
Definitely less to build than to buy. My guess is it cost around $100 to build.
A Modern Maker awesome. Thank you.
No problem. I have another video where I build a wrought iron (steel) gate. Materials were $650 and quotes he got from gate fabricators ranged from $3000-4,000.
What side of tubing u are using???
1.5” I believe
Good job but safety first
Hey What is the steel size and thickness?
It's called HSS or RSS correct? I'm wanting to use your dea and build to 7ft panels for my driveway gate.
Any suggestions? ......
I can’t remember. Either 2x2 or 1.5x1.5. Thickness was .120” I believe. But for fence you could go thinner walled. And it’s just mild steel.
@@AModernMaker I see. I'm thinking about using the method to build a 14ft car-gate.
(2) 7'x5' panels and attaching them with cattle gate hinges to 6x6 Cedar posts that are already installed.
That’ll be nice.
Nice job my friend, I wanted to ask about the black patina for metal, is your formula or commercial sale? Thank you very much.-
Thank you +Germán It's a commercial product. Black Magic by Sculpt Nouveau.
Thanks for the quick response, respect from Argentina!
+Germán Anytime. Awesome!
Great build! how much gap did you leave between the wood? stay awesome
+MusikaHouse Thank you! About 3/16"
+MusikaHouse Possibly 1/8" can't remember...
Do u have a manual hand crank bender (three wheel)?
+keith henry Not yet, but I'm planning on building one. Still working out the design in my head.
Are those speed square really accurate? ?
+keith henry They're accurate enough for me along with measuring diagonals, etc.
I've seen where you can buy a DIY kit at a gunstore to re-blue an old gun, have you ever tried it on structural steel? I wonder how it would look.
+Xrated Rednek I've never tried it, but I'm sure it could give a similar look. They sell it where I buy my metal treatment product. Maybe I'll try it out sometime!
Hi, pls what type of wood did you use?
It was cedar
Thanks
How much would it cost .63" x 54" fence
No idea. I typically don’t build to sell.
@@AModernMaker okay. Lovely neat work ..may I say sir
What size screws did you use?
5/8”
En el minuto 2:20, perforas metal, que máquina utilizas y hasta que grosor puede perforar, saludos.
Manuel Garduño Es una cortadora plasma, no es real mente para perforar aunque en metal delgado si lo puedes hacer, es mas bien para cortar metal y depende de la capacidad de maquina para el gruesor, he visto algunas que cortan placa de hasta 1 pulgada de gruesor.
Hypertherm Plasma Cutter. Puede perforar hasta media pulgada.
wooden gates dint get wet in rainy seasion???????
It got a little wet but it’s holding up well!
What kind of wood is that?
Cedar
If u do I would like to have the plans pls
+keith henry Definitely
I would like to get the type/size of metals used along with the plans. It turned really great. I just bought my first welder and would like to try this project.Thanks jamie
Awesome gate, great work. Why does it look like your not cutting perfect 45 degree cuts on your miters but they come out perfect?
Thank you! They are perfect enough when welding.
Fabricare una igual aver como me queda
Mandeme una pic cuando la termine.
Ok
Cuánto sale costo