www.xtool.com/... to get a discount on qualifying purchases, use the link. Your coupon code should fill in automatically, but if it doesn't, it is xToolMaking
A couple tips that may help, or give another option. *To put in a size that’s .xx. Start by putting a zero and then the dot and your numbers ( 0.18) *When you have a small spaces or want to be a little more exact on placement, choose outline on your framing instead of rectangle. You will see an outline of the actual design instead of the size of the largest parts. *Blue light can in fact engrave on stainless steel jewelry without marking spray, and you can get colors on both lasers. I wish I could show a photo here for you of my test tag. *Instead of trying to set up the placement on the bed, click outline, framing, and then use your mouse to move the design around a little at a time until it’s close to where you want it, then use your arrow keys to fine tune it to perfection, when perfect click stop framing, proceed * If you are doing more than one, place the locating bracket on the bed, line up the product against it on both angles. When you finished the first and are just changing the name, all you have to do I’d place the next product against the bracket and double click the text and retype . That’s it. Ready to go
Thank you for the tips. I was told that if I update my software, the issue with the .xx will be fixed. I would love to see your picture. You can either email it to me or you can join the Facebook group and post a picture there. Let me know if either of those are an option for you.
🙌you don’t have to delete the name when making another, just rename it in place. Also previewing as object mode instead of rectangle will show a better view, it happened to me the square shows is centered and aligned but then the letters are engraved too high or too low. I bought a magnifying loupe🤓
Hi Marilyn, like your videos. I find they are very helpful for me when I watch you interact with your media and show what your doing on the PC at the same time. Quick question, could you put masking tape on the bracelets to help with the framing?
Hi and thank you for your informative and inspirational videos 👌This is just my personal preference,but i find it much easier to move the item to be engraved to the framed area.Just make the text/shape to be engraved in the software,hit framing,and then move the item into the frame,done,perfect fit each time.And also the outline framing is great sometimes.
Thank you so much for sharing your tip. I often do it that way too, but I was afraid the tiny little bracelet wouldn't be straight:) I may try it that way next time, though.
Hello Marilyn! I also have the F1 and your video was helpfull. I got a neighbor who ask me to engrave a bracelet just like the one on your video and I was able to do it because of your help. Any advice to clean the piece after engraving? Greetings from Guatemala ✨
I got the deluxe package with RA 2 rotary, extension table and air assist.. also get free Black Friday gift. Think maybe got tracking for next week to get machine says 47.4 lbs UPS delivering assume machine and goodies
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
yes yes yes OH Thank You Marilyn for showing us all of your wonderful tools AND creations!!!
Thank you Heather!!!
A couple tips that may help, or give another option.
*To put in a size that’s .xx. Start by putting a zero and then the dot and your numbers ( 0.18)
*When you have a small spaces or want to be a little more exact on placement, choose outline on your framing instead of rectangle. You will see an outline of the actual design instead of the size of the largest parts.
*Blue light can in fact engrave on stainless steel jewelry without marking spray, and you can get colors on both lasers. I wish I could show a photo here for you of my test tag.
*Instead of trying to set up the placement on the bed, click outline, framing, and then use your mouse to move the design around a little at a time until it’s close to where you want it, then use your arrow keys to fine tune it to perfection, when perfect click stop framing, proceed
* If you are doing more than one, place the locating bracket on the bed, line up the product against it on both angles. When you finished the first and are just changing the name, all you have to do I’d place the next product against the bracket and double click the text and retype . That’s it. Ready to go
Thank you for the tips. I was told that if I update my software, the issue with the .xx will be fixed. I would love to see your picture. You can either email it to me or you can join the Facebook group and post a picture there. Let me know if either of those are an option for you.
@@MakingwithMarilyn I emailed you
That was really cool to watch. I could see the dot moving back and forth. Turned out very nice. Nice machine as well. 🖖
Thank you!
🙌you don’t have to delete the name when making another, just rename it in place. Also previewing as object mode instead of rectangle will show a better view, it happened to me the square shows is centered and aligned but then the letters are engraved too high or too low. I bought a magnifying loupe🤓
The magnification is a great idea, thanks.
Hi Marilyn, like your videos. I find they are very helpful for me when I watch you interact with your media and show what your doing on the PC at the same time. Quick question, could you put masking tape on the bracelets to help with the framing?
Thank you very much! I haven't tried engraving through a painter's tape but I will try that out.
Hi and thank you for your informative and inspirational videos 👌This is just my personal preference,but i find it much easier to move the item to be engraved to the framed area.Just make the text/shape to be engraved in the software,hit framing,and then move the item into the frame,done,perfect fit each time.And also the outline framing is great sometimes.
Thank you so much for sharing your tip. I often do it that way too, but I was afraid the tiny little bracelet wouldn't be straight:) I may try it that way next time, though.
Hello! I want to engrave silver jewelry but I don't want the engraving to be too dark. Can you put a clear engraving? fine? thank you so much
You can adjust your settings to make it less dark. Also, to make your engraving fine, you would use a fine narrow font.
Hello Marilyn! I also have the F1 and your video was helpfull. I got a neighbor who ask me to engrave a bracelet just like the one on your video and I was able to do it because of your help. Any advice to clean the piece after engraving? Greetings from Guatemala ✨
Thank you very much for your comment! I clean mine up with rubbing alcohol.
When you frame it, do you look for laser to simulate the engrave like when with embroidery
Yes, that is one way. The other option is to frame around the very outside. It’s nice to have both options.
I got the deluxe package with RA 2 rotary, extension table and air assist.. also get free Black Friday gift. Think maybe got tracking for next week to get machine says 47.4 lbs UPS delivering assume machine and goodies
Is this compatible with a Mac computer?
Yes, a Mac is what I use with it.
Marilynn👋🏽looks really nice🤔I would like to have an engraving machine😮
Thank you, Nicole!
How does it do with sterling silver or gold?
I'm sorry, but I haven't used it with those materials.
What is the name of the font?
Ashley Southine.
@@MakingwithMarilyn thank you
Omg....how do you find anything on that desktop? It's loaded! 😂😅❤
I know Chris!!! It is so bad! I really need to do something about it:)
Where did you find your bracelets?
I got these from xTool. Thank you for watching!
❤ Thanks for sharing 😊
Thanks so much for watching!
Good video thanks looks good ❤
Thank you, Jessie!