Yea, your ridiculously good with these builds Sir! Last guy is right, you can't purchase anything built to this level. Even the really spendy stuff available is production line, what you've shared with everyone is incredible! Thank you! Such a welcome distraction for me, I know scrappy and the Windex is Gorgeous! I don't know what this thing is but she looks amazing too. Thanks again
I love to build and love to try new ways of doing it. However when I watch any of your videos I feel like brick trying to float like a feather. Your skills are from another planet!! I can watch you work all day long and have picked up some great techniques that you use. Your builds are BETTER than anything I have seen produced by any of the factory model builders. YOU ARE AN AMAZING CRAFTSMAN!!!
Wonderful job and design, as usual... It could be nice writing each material caracteristics, glue, foam, covering, etc, few seconds on picture corner... Thanks master
Now I have also watched the complete video. Beautiful model and the color selection a dream. I would like to see more. Such a talent and gift, really good.
I watched again> I wondering what i did for the last 40 years. Pretty awesome stuff. Maybe you could make a mistake now and again . Like put a hinge hole in the wrong place or something like that. And everything is so clean. I have tools everywhere ....why dont you? And being as i think i am a builder the glues are of interest!
Unbelievable finish, some amazing skills here, treat to watch, thanks for sharing. Btw, can you please share which red and carbon wraps have you used? they look stunning, cheers
Awesome as usual dude. Your building skills are great, just be carefull cutting vinyl with the laser, it produces chlorine gas which is highly toxic and can also rust your machine
What did you use to gain the clearance in the tube? The black stingi thing you pulled out with pliers... Dont you have any issue with deformation or bent tubes when using the vakuum for tube?
Великолепно! Получаю истинное удовольствие, наблюдая, как вы делаете легко и просто! Как называется марка плёнки для обтяжки крыла и фюзеляжа, которую вы используете?
This was also one of the reasons why I started making them 27 years ago. Airplanes were expensive and there was only one solution, you had to learn to make them yourself :)
@@markoroolaid I'm with you. What really bugs me is getting 75 cents worth of FOAM or foam board and calling it an airplane. Like the FlightTest models made of foam & paper that will delaminate in short order. (god forbid they should get some rain on them!) In my mind, Balsa is the only way to fly. The first plane I built was a Carl Goldberg Eagle 63. That was 20 years ago and It still flys straight as an arrow, I have it hanging in my office! (as well as many others.) So now I am scratch building because most balsa planes are gone, and I can modify the plans to suit my needs. I am currently building a long range FPV balsa plane. Cheaper, lighter than foam board, durable, and better looking by far. And it will LAST. I love building as much as flying!
Marko, I really love the style of your videos! Pls keep going on like that, I'm curious about future projects! 👌 Also I'm looking forward to see the maiden 🔥
Ты, - болшой молодец)👍👍👍и мастер!!!
The master at work. "looks" easy, but years of know how incorporporated in the construction. Theres a lot to learn here!!! Loved the video
Yes, you are right. That's 27 years of experience. Thank you for your comment
Yea, your ridiculously good with these builds Sir!
Last guy is right, you can't purchase anything built to this level.
Even the really spendy stuff available is production line, what you've shared with everyone is incredible!
Thank you!
Such a welcome distraction for me, I know scrappy and the Windex is Gorgeous! I don't know what this thing is but she looks amazing too.
Thanks again
It doesn't get any better than this. Seriously.
I told you. You are the best !
once again perfect. the design is so clear and ingenious. a real talent
wow.. speachless. amazing. cool workshop with all the toys also.. not sure which i'm more in love with, the build or the shop!
Thank you very much
Wow.. that's impressive 👌
Thank you
@@markoroolaid greetings from indonesia 🇮🇩
wow, and greetings back form Estonia
Amazing very hard work bro i m indian youtuber bro❤️❤️❤️❤️❤️❤️😊
You have a very awesome channel, Thank you
Thanks for sharing Marko. Your videos are very inspirational for my own projects!
Thank you so much
I love to build and love to try new ways of doing it. However when I watch any of your videos I feel like brick trying to float like a feather. Your skills are from another planet!! I can watch you work all day long and have picked up some great techniques that you use. Your builds are BETTER than anything I have seen produced by any of the factory model builders. YOU ARE AN AMAZING CRAFTSMAN!!!
I am completely speechless. Anyway, thank you very much for your kind words.
Beautiful!!!
Thank you
Muy buena técnica para hacer agujero de bayoneta de ala!!! felicitaciones por el video!!
Muchas gracias. Me alegro de poder ser de utilidad
Craftsman at work, amazing quality
Thank you so much
Wonderful job and design, as usual...
It could be nice writing each material caracteristics, glue, foam, covering, etc, few seconds on picture corner...
Thanks master
I really really enjoy watching your videos. You are a great builder.
thanks
Высший пилотаж!!!🛩🛩🛩
Really like how you do the servo links with the carbon tubes. Super clean
That was a very satisfying build to see, right from start to finish. =^/.^=
I can't wait to see the maiden flight.
thanks
Superb!!!!! Thank you so much Marko!
thank you
Now I have also watched the complete video. Beautiful model and the color selection a dream. I would like to see more. Such a talent and gift, really good.
Thank you so much
I watched again> I wondering what i did for the last 40 years. Pretty awesome stuff. Maybe you could make a mistake now and again . Like put a hinge hole in the wrong place or something like that. And everything is so clean. I have tools everywhere ....why dont you? And being as i think i am a builder the glues are of interest!
Thank you so much
Unbelievable finish, some amazing skills here, treat to watch, thanks for sharing. Btw, can you please share which red and carbon wraps have you used? they look stunning, cheers
Hi, carbon fiber vinyl metrorestyling.com/collections/3m-carbon-fiber-vinyl-wrap
Red oracover www.lindinger.at/en/SUPPLIES-MISC/BUILDING-MATERIALS/Covering-Material/Ironing-Foil-Coverings/ORACOVER-IRON-ON-FILM-RED-FLUORESCENT-3-METER-21/82345
@@markoroolaid thanks a ton
Новый уровень! 👍
Не припомню таких станков у вас...
uhauuu such a beautiful and a professional work...you are a genius uahhhh again
Thank you very much
I liked all I've seen in your video. Congratulations!!! It's a great model!!! 😊
thank you so much
hello you are very good, i 🇻🇳vietnam
thank you very much
That looks stunning. Marko. Looking forward to the maiden flight. I'm sure it will fly as good as it looks.
Tu es un constructeur incroyable, tout est tellement propre et bien fait . Félicitations.
merci beaucoup, j'essaie vraiment de garder cet atelier propre
Brilliant Marko 👍
thank you
You my friend have some next level skill…….and tools!😃👍
Excellent work!
Just... G O R G E O U S
thank you very much
Super äge vaadata! Meister!
Suured tänud
Your job is always flawless. Unbelievable.
Congratulations for achieving this level of quality in a lot of different skills.
Awesome as usual dude. Your building skills are great,
just be carefull cutting vinyl with the laser, it produces chlorine gas which is highly toxic and can also rust your machine
Parabéns pelos aero seu trabalho é top!!!
muito obrigado, significa muito para mim
That's a fast looking plane! Awesome work sir!
Im dreaming of becoming one Das as good as you are. My mind is blown by the craftsmanship and dedication to details
Thank you
Du bist der Muhammad Ali (Cassius Clay) unter den Modell- Bauern. 👍🏻👍🏼👍🏽
:)
@@markoroolaid 😇
They say you shouldn’t laser cut vinyl… but I’ve done it on occasion and I’m fine. So is the laser.
Awesome work! Looking forward to seeing it fly 👍🏻
thank you
What did you use to gain the clearance in the tube? The black stingi thing you pulled out with pliers...
Dont you have any issue with deformation or bent tubes when using the vakuum for tube?
Hello. I used baking paper to give distance. If you use a strong tube, the vacuum will not deform it
Is the red wing covering (adhesive backed) vinyl, like I use in my vinyl cutter?
No. Red is Oracover
@@markoroolaid Excellent, thank you! Beautiful work!
Just watched Mr.Bean expertly scratch build a beautiful airplane
:)
Got it!
thank you
Amazing build good luck with the maiden 😂
thanks
Великолепно!
Получаю истинное удовольствие, наблюдая, как вы делаете легко и просто!
Как называется марка плёнки для обтяжки крыла и фюзеляжа, которую вы используете?
Привет
Я использовал пленку Oracover на крыльях, а фюзеляж покрыт виниловой пленкой 3M из углеродного волокна.
Как всегда отличная модель, поздравляю! Надеюсь что скоро будет видео облёта.😊
как можно скорее, если будет хорошая погода, постараюсь вылететь немедленно
Marko... is there a video about the molds?
The molds are made in this video, maybe it will help , video link ruclips.net/video/wSM4nM1ThJ0/видео.html
👏👏👏👏👏
Thank you for your video,
What is the type of cover you used for covering in black and the red role? Is it possible to leave a link for those covers.
Hi, carbon fiber vinyl metrorestyling.com/collections/3m-carbon-fiber-vinyl-wrap
Red oracover www.lindinger.at/en/SUPPLIES-MISC/BUILDING-MATERIALS/Covering-Material/Ironing-Foil-Coverings/ORACOVER-IRON-ON-FILM-RED-FLUORESCENT-3-METER-21/82345
@@markoroolaid Thanks Marko, there are about 5 shades of Carbon vinyl on the link you shared, which shade are you using exactly, again many thanks
@@nakul3424 Hi, carbon code 2080-CFS12
👌
The quality is just getting ridiculous you couldn't buy a plane that nice great work I think its the cleanest yet
thanks
can you help me build something like that?
Какая модель принтера на котором печатали модель? Скажите пожалуйста.
3D-принтер был Ender 5 plus.
Nice work, what glue did u use for the foam and balsa wood wing 😀 please 🙏
EPS plate foam glue espak.ee/epood/toode/poluuretaankiirliim-ceresit-ct-84-850ml/
JESUS H. ALLAH!!, THAT IS ONE BEAUTIFUL AIRCRAFT!! Which means I can't afford it. : (
This was also one of the reasons why I started making them 27 years ago. Airplanes were expensive and there was only one solution, you had to learn to make them yourself :)
@@markoroolaid I'm with you. What really bugs me is getting 75 cents worth of FOAM or foam board and calling it an airplane. Like the FlightTest models made of foam & paper that will delaminate in short order. (god forbid they should get some rain on them!) In my mind, Balsa is the only way to fly. The first plane I built was a Carl Goldberg Eagle 63. That was 20 years ago and It still flys straight as an arrow, I have it hanging in my office! (as well as many others.) So now I am scratch building because most balsa planes are gone, and I can modify the plans to suit my needs. I am currently building a long range FPV balsa plane. Cheaper, lighter than foam board, durable, and better looking by far. And it will LAST. I love building as much as flying!
👍
Thanks
Are you laser cutting the vinyl? or what is that that looks like carbon fiber? Please.
Hi, vinyl yes
@@markoroolaid is it laser safe and where I can get it from?
What does it weigh?
hi, about 3.5kg
You have an impressive amount of equipment to work with! 😮
Surisly??
Marko, I really love the style of your videos! Pls keep going on like that, I'm curious about future projects! 👌 Also I'm looking forward to see the maiden 🔥
Thank you very much. Future projects - currently in the thinking phase. If something interesting, please be sure to recommend
And the first flight should come soon, the weather has already gotten nicer and it's already nice on the field
Grandios!!!
thanks
I hate my job and my life..
:)