Excellent ideas! To avoid yellowing of transparency projects, one could/should add a thin layer of a polyurethane based UV protective clear coat. Not cheap though, but a can does last a very long time.
When used for making hearing aids all our bottles of resin were laid flat on motorised rollers and continuously rotated. I don’t know if you could make something up just to use for a few minutes before you want to use the resin to avoid the air bubbles.
Great Video. Thanks allot. I'd like to use it for Windhields for my model ships and cars. So they have to be very clear. As i have a Elegoo saturn 2 printer i'm looking for settings, that could be used as a base for adjusting. Do you have any suggestions?
I would love to have a 3d printer and clear resin as well as the UV hardener so that I could print a custom inkwell for my calligraphy. As for the white paint that was used on the sign, there are mixtures that are more transparent while still being white.
Hej Martin, berätta gärna (i nästa video) att det är väldigt enkelt att beställa både 3D printer och resin via Anycubic's Amerikanska hemsida. Leveransen kommer inom EU från Tyskland dvs inga påslag för tull, frakt, moms etc. Dessutom fraktfritt från Tyskland! Det tog en stund för mig att förstå detta så jag beställde via svenska leverantörer till en högre kostnad, längre leveranstid och dessutom fraktkostnad.
What is the camera you have, i have a creality resin printer and am looking for a camera 🙂
Год назад
A very useful video. Can you please conform the name oof the company where SMD LEDs can be ordered from ? One is Distrelec, and the other is DIGIkey? DGK? or what? Thank you, best regards,
it's cheaper if you just get like thin sheet of plastic for large walls, and just have it over the whole back of the wall. For bigger applications, resin is more difficult. It's just easy for the smaller applications.
Hello Martin, thanks for your informative and captivating videos. I have a question: do you think is worth to spend the extra Euros for the Photon M3 plus? Isn't sufficient the detail provided by the Photon Mono X2? Is the extra detail of the M3 plus really appreciable? Thanks! Luca
Tack för den fantastiska videon med en introduktion av det nya hartset och en presentation av några möjligheter.
Love being one of your patrons, always my favourite RUclips MR channel. Cheers again from Australia, Stew
Thank you Martin for another great video! Joachim
Some very nice tips I have an Anycubic resin printer I am building an underground subway system using clear high resin to make the tunnel sections
Excellent ideas! To avoid yellowing of transparency projects, one could/should add a thin layer of a polyurethane based UV protective clear coat. Not cheap though, but a can does last a very long time.
Great work…
Beer?! Best usage of 3D-printing so far! 😋
🍺I agree totally🍺
Simple but great ideas. Thank you!
Interessting Video. Good job. Have a nice weekend.
Thank you so much for sharing your experience.
thanks for the ideas... It may help me a lot to make flush windows for my old Lima OO coaches I plan to refurbish and detail...
very nice stuff.😄
Great ideas sir. Thank you for sharing your knowledge and expertise.
great video again, do you ever think about changes playlist, so the newest video playlist will be on top. instead we have to find it under video tap.
Thank you for the idea! I’ll do that!
When used for making hearing aids all our bottles of resin were laid flat on motorised rollers and continuously rotated. I don’t know if you could make something up just to use for a few minutes before you want to use the resin to avoid the air bubbles.
Time to throw a party, I can print as many crates of beer as I like! Drinks for everybody! 😅
BRAVISSIMO ! GRAZIE DEL VIDEO ! 👍
Tack för ännu en bra video 👍🏻
Great tips
Thanks for sharing 👍
5:30 I see you didn't prime the resin part, what paint did you use?
Great Video. Thanks allot. I'd like to use it for Windhields for my model ships and cars. So they have to be very clear. As i have a Elegoo saturn 2 printer i'm looking for settings, that could be used as a base for adjusting. Do you have any suggestions?
I would love to have a 3d printer and clear resin as well as the UV hardener so that I could print a custom inkwell for my calligraphy. As for the white paint that was used on the sign, there are mixtures that are more transparent while still being white.
Hej Martin, berätta gärna (i nästa video) att det är väldigt enkelt att beställa både 3D printer och resin via Anycubic's Amerikanska hemsida. Leveransen kommer inom EU från Tyskland dvs inga påslag för tull, frakt, moms etc. Dessutom fraktfritt från Tyskland!
Det tog en stund för mig att förstå detta så jag beställde via svenska leverantörer till en högre kostnad, längre leveranstid och dessutom fraktkostnad.
Could you use the resin as water poured onto the base board
Genius
What is the camera you have, i have a creality resin printer and am looking for a camera 🙂
A very useful video. Can you please conform the name oof the company where SMD LEDs can be ordered from ? One is Distrelec, and the other is DIGIkey? DGK? or what? Thank you, best regards,
Hello, do you think this method could be used to print walls of a building with their windows included? How would the windows look like?
it's cheaper if you just get like thin sheet of plastic for large walls, and just have it over the whole back of the wall. For bigger applications, resin is more difficult. It's just easy for the smaller applications.
Hello Martin, thanks for your informative and captivating videos. I have a question: do you think is worth to spend the extra Euros for the Photon M3 plus? Isn't sufficient the detail provided by the Photon Mono X2? Is the extra detail of the M3 plus really appreciable? Thanks! Luca
Nice video, great tips but where you find the files voor 3d printing
I cannot find the set for the beer crates and bottles.
Never mind, I found them.
Would you be interested in 3d barrels - hollow with lids? I designed some for my ship models and can share the file with you.
мужик ты крутой жду ещё видео
Absolutely amazing stuff!!