I used a product called zinsser BIN , had it tinted to almost post box red, for a customer's bi-fold doors which had turned salmon pink. She was going to fork out for a new pair so it saved quite a few pounds. The finish couldn't be any better. highly recommended, they also do a water based called allcoat, I use that regularly the black is the best I have ever used.
i've just bought Allcoat in gray for uPVC, 2018 door and windows, so i hope the weather has taken off some of the plastic anti-paint quality. I wish a follow up was put on all these youtubers painting plastic, see how it really fares after a year or so.
I'm hoping to be able to do a good job like this. Enjoyed the video... Why people have to criticize so nastily I'll never know. I've subscribed! Love DIY so no doubt will watch more of your videos. Happy days !
How to paint a COMPOSITE front door .That is a fiberglass door old bean hence the fact you could paint it ,and did not try to paint the upvc outer frame.
Yes a composite it is and at the time of this being posted painting upvc was rare however now everybody is painting their brown upvc windows Anthracite grey due to advances in paint he still thought he was painting one with normal paint at the time 👍🏼
I must admit I fully enjoyed watching this one as I have never seen anyone paint a PVC door . I used to have to paint meter boxes for one of the companies I worked for . if I ever have to do this I will now know it is possible and the only difference is I would whip the letter box and door handle off only cause over time the letter box can move slightly or if ever needs replacing can end up being a little difference size . fantastic to watch you do this
Thank you for this. I will have a go with an old white UPVC door I bought from eBay. I am also going for the black finish. I was worried that I would have to use spray paint until I saw this video.
Except the door he painted in the video is a fibreglass door and not a uPVC door. A plastic (uPVC) door has no grain. He is advising us to follow the grain while calling it a plastic door. Very misleading.
wallingtonfilming The Candle man tried rolling with the orange flock 4inch rollers , Why you'll cover yellows red in one go , sorry to nag but turps sub makes white go yellow & tell people to go easy on spirits/terrabine as it can go to a mess
So we should paint over the hinges? I was thinking of masking taping them? Also can it be easier to take the door off to paint? if you have someone who can hang doors ok. Also should I make sure the brush is new?
Hi mate, good video and you lads are a laff too. Question : would a primer like owatrol esp work ok for this? And which undercoat is suitable, would any indoor water based undercoat be ok? If you could recommend the undercoat you used please.
Great video. I have a door like that when the paint has flaked off in bits, sanded it down but there are areas which feel pitted - do I need to use a filler to flatten the surface or just paint straight over and let the paint even the surface put? Thank you.
Wash PVC why most plastic have a processing finish. Sanding will or may not remove the stuff. Detergent wash and water rinse Trim Dry then solvent wash. Water will remove any water base contaminates Solvent wipe removes any oil based. You can then lightly buff surface with scotch brite or sand clean prime with latex dry paint with latex.
Nice job Wallington. I've noticed New Companies "spraying" Upvc doors /windows. . Does anyone think it will "peel off due to UvA sun , and some upvc doors tend to go very hot or cold.
Sorry mate but you dont paint a door like this, you do all the mouldings first, you also went all the way across on the cross sections causing an overlap on the straights, the door is going to be full of ladders and overlaps.
Edges drying all over the place.. .will show through ...should have done round beading with fitch not touching main door then paint rest of door keepung edges wet...this is how not to paint a door
There is paint on the carpet, should use a dust sheet, and the brush it is a cheap rubbish one. Not to add that you should spray it if you were professional.
You should of taken the door off no hinge on a double glazed door are painted and I hold of taken the handle and letter box off as well that’s a cowboy job
Been a hairy stick pusher since 82
Youre a true legend buddy
Keep it up👍
Norfolk boy 😁
I used a product called zinsser BIN , had it tinted to almost post box red, for a customer's bi-fold doors which had turned salmon pink. She was going to fork out for a new pair so it saved quite a few pounds. The finish couldn't be any better. highly recommended, they also do a water based called allcoat, I use that regularly the black is the best I have ever used.
i've just bought Allcoat in gray for uPVC, 2018 door and windows, so i hope the weather has taken off some of the plastic anti-paint quality. I wish a follow up was put on all these youtubers painting plastic, see how it really fares after a year or so.
A little laughter at work makes the day pass by children!
Never seen a better painter and wallpaper hanger than my dad. Not seen one video on You Tube to convince me to change my mind....including this one.
candle man is the best in the business. If you seen his work up close and personal you would have a stiffy for days
Great painter I really enjoy your videos. I am a lady painter.
Just painted my plastic door thanks to this video. Thanks!
6yrs on how does it look? How often have you repainted it?
Literally five brush strokes in.. "ready for a cup of tea" 😅😂
I'm hoping to be able to do a good job like this. Enjoyed the video... Why people have to criticize so nastily I'll never know. I've subscribed! Love DIY so no doubt will watch more of your videos. Happy days !
I am surprised that you didn’t remove the letter plate and door handle rather than mask them.
i guess Im quite randomly asking but do anyone know of a good website to stream newly released series online?
@Kristopher Julian I watch on Flixzone. Just google for it =)
Great video, very well explained keep up the good work.
You’ve convinced me to try this ....thank you
How are nikki xx
How to paint a COMPOSITE front door .That is a fiberglass door old bean hence the fact you could paint it ,and did not try to paint the upvc outer frame.
Its not upvc then?...Looked like composite to me
Yes a composite it is and at the time of this being posted painting upvc was rare however now everybody is painting their brown upvc windows Anthracite grey due to advances in paint he still thought he was painting one with normal paint at the time 👍🏼
Looks nice I've got that colour. Your workmates like a 😂 laugh. I wish I was that quick.
I must admit I fully enjoyed watching this one as I have never seen anyone paint a PVC door . I used to have to paint meter boxes for one of the companies I worked for . if I ever have to do this I will now know it is possible and the only difference is I would whip the letter box and door handle off only cause over time the letter box can move slightly or if ever needs replacing can end up being a little difference size . fantastic to watch you do this
Didn't know I was watching a chuckle brothers new vid,I think the one with the camera had a feather were the sun don't shine
Why not just use allcoat gloss tinted to whatever colour you want? No need to pre prime then....
Thank you for this. I will have a go with an old white UPVC door I bought from eBay.
I am also going for the black finish. I was worried that I would have to use spray paint until I saw this video.
Except the door he painted in the video is a fibreglass door and not a uPVC door. A plastic (uPVC) door has no grain. He is advising us to follow the grain while calling it a plastic door. Very misleading.
Dulux Trade A100 Etch Primer, I also added a little bit of Hurry up just to keep that wet edge going. TheLondonForever00
wallingtonfilming The Candle man tried rolling with the orange flock 4inch rollers , Why you'll cover yellows red in one go , sorry to nag but turps sub makes white go yellow & tell people to go easy on spirits/terrabine as it can go to a mess
Why would you use Hurry-up to keep a wet edge going when it actually dries it quicker.
brilliant
how life and work should be
So we should paint over the hinges? I was thinking of masking taping them? Also can it be easier to take the door off to paint? if you have someone who can hang doors ok. Also should I make sure the brush is new?
He painted over the hinge!!
+Tino Demitro that is because the customer asked him to. He said that normally he wouldn't but the customer wanted it done!
Hi mate, good video and you lads are a laff too.
Question : would a primer like owatrol esp work ok for this?
And which undercoat is suitable, would any indoor water based undercoat be ok? If you could recommend the undercoat you used please.
A neighbour of mine did this, it looks horrendous when the sunlight catches it.
Great video. I have a door like that when the paint has flaked off in bits, sanded it down but there are areas which feel pitted - do I need to use a filler to flatten the surface or just paint straight over and let the paint even the surface put? Thank you.
Fill it, paint only hides so much
Wash PVC why most plastic have a processing finish. Sanding will or may not remove the stuff. Detergent wash and water rinse Trim Dry then solvent wash. Water will remove any water base contaminates Solvent wipe removes any oil based. You can then lightly buff surface with scotch brite or sand clean prime with latex dry paint with latex.
Nice job Wallington.
I've noticed New Companies "spraying" Upvc doors /windows. .
Does anyone think it will "peel off due to UvA sun , and some upvc doors tend to go very hot or cold.
YES IT WILL PEEL LIKE A OLD BANANA.
The thing that makes it go hard quicker?
Can you use that stuff inside indoor gloss paint? Thank you
No1 Nicechick
Yes
No1 Nicechick you’d get it 😍
Would this process work with kitchen cupboards. ( liaminate)..
Yes
today , love it !
Like yr vids ignore doubters keyboard idiots.keep it up
Did you use normal oil u/c and gloss
sick to the painting
hello could you tell me which etch primer you used cheers great video by the way
How much would it cost to get a front door painted.
Our lass sez you look a bit like Daniel Craig. I wondered what he did on his day off. :)
Looks like a standard site metal door not plastic !
That giggler would put me off employing this painter
Sorry mate but you dont paint a door like this, you do all the mouldings first, you also went all the way across on the cross sections causing an overlap on the straights, the door is going to be full of ladders and overlaps.
Cut, roll, lay off. It's just the way Aussies do it.
Great video, when you say you rubbed the door down first do u mean with sanding paper?
Fine wet and dry is best
A lot easier with a 4 inch roller,, faster and better finish
Were the FLASH
Who? 🕯☕️🚬
Cheers some people are so dumb
Can you paint a door like this with a roller?
@@leehunter8407 yeah
Wanker oil base on a p.v.c door cow boyyyy from tcdecs
...and you wonder why the Polish and Irish tradesmen are getting all the proper work in England...?!
The Bowl Of Soup do me a favour site work is monkey work your welcome to it.
MEVD2011
You pathetic fuckin Brit beach!
Like all of their Britz you are a fucking coward
Can you do this on composite
That is a composite
very helpful, shame about the unprofessional cameraman
Loved the cameraman
Edges drying all over the place.. .will show through ...should have done round beading with fitch not touching main door then paint rest of door keepung edges wet...this is how not to paint a door
This is how NOT to paint a door !!!!
i think the irish painters have a bit more quality about us
If you paint what you can’t see it’ll be fucking difficult
Is that a £1 paint brush from ikea...what a muppet
There is paint on the carpet, should use a dust sheet, and the brush it is a cheap rubbish one. Not to add that you should spray it if you were professional.
You should of taken the door off no hinge on a double glazed door are painted and I hold of taken the handle and letter box off as well that’s a cowboy job
Unless your door is really old and looks like shit, don't do it.
Hi, what Etching Primer do you use in the video? Thanks in advance.
TheLondonForever00 why did "BLACK" oil based on plastic door 's white ??
I wouldn't employ to him open my door never mind paint it
I think u mean UPVC door not plastic
Think you'll find that's a composite door not upvc
back edge lolololol
Very unprofessional.
Wouldn't employ these cowboys !
Who keeps laughing?? Stay professional
Want to be a decent painter don’t copy him
I made it yourself thanks to woodprix plans. I think it's the best way to learn how to build it in the cheapest way.
I know you hate watching people paint by watching you bet you hate watching dibing and dabing
Histrionic laughs
Is something wrong with you
Lol
The laughing is distracting and very annoying.
Sikkins ruberol is far better ,
If you're a professional painter how comes you got so much pain on you instead of the door
It’s called working something you know, nothing about, obviously 🤣🕯☕️🚬
Shame the clown didn't cover the carpet before dripping paint all over it!
Theres no carpet dumbass 😂😂
What a useless job, door should be taken out, sanded and paint using compressor!
Waldemar Spetany you muppet
@@justbreakingballs twat!
WONT LAST FIVE MINUTES NO MATTER WHAT YOU PUT ON IT YOU SHOULD KNOW BETTER.