I hate mixing, testing and cleaning up. If I have a small job, I order the gel coat spray cans from dolphinite. They'll mix custom orders from a paint chip or swatch. I heard they had some problems in the past, but my experience was recent, and no problems for me.
other gel coat guns use a 4 to 6 mm spray nozzle. The HGP gun says comes with 1.8 & 2.0. Does the pressure on the pot lower the size of the orifice required ? Does is have a better atomization pattern than other dump guns ?
www.starchem.co.uk/products/masking.htm Ive used this one: www.todayshomeowner.com/video/combination-painters-tape-and-masking-film-dispenser/ Its ok, but has a slight head ache factor.
Can anybody tell me if they’ve ever sprayed gel coat, if so is it normal for it to orange peel? Is it just because the nature of gel coat to get that way or I’m not adjusting the spray gun well? I have a Fuji HVLP T75g & 3M PPS. This gel coat I sprayed is really thin, not like typical thick gel coat, sold by Lilly Ram
How many coats are you putting on? Normally 3rd coat is when orange peeling effect occurs but you will probably need at least 3 coats anyway depending on the projects you’re working on. Hope this helps
Yes it will peel. If it’s not orange peeling your doing it wrong. If you use Duratech High Gloss Additive to thin the gelcoat you will find you get little to no peel. Although, it’s quite expensive! NEVER EVER EVER use Acetone to thin, or styrene or MEK (not MEKP, that’s hardener). Only use patch aids like duratech, fast patch any spectrum or polynt patch booster. Good luck!
The disposable parts are the genius of the system. Once you're done throw it away saves time, headache, and every time you use it, it works like brand new (because it is new).
I hate mixing, testing and cleaning up. If I have a small job, I order the gel coat spray cans from dolphinite. They'll mix custom orders from a paint chip or swatch. I heard they had some problems in the past, but my experience was recent, and no problems for me.
Sooo, is this made by 3M perhaps? Im not sure, dont think they mentioned it enough times. Can we have a 3M count?
I love 3m but wowwwww. Pump the brakes Bois.
And use your 3M work cart ,,,,,
other gel coat guns use a 4 to 6 mm spray nozzle. The HGP gun says comes with 1.8 & 2.0. Does the pressure on the pot lower the size of the orifice required ? Does is have a better atomization pattern than other dump guns ?
Is possible to put gelcoat in a surface epoxy
You did not use a hardner ?
Harbor freights $15.00 spray gun works just as well, but soon they will probably be know longer available, if you catch my drift. Made in America
I'm ready, all I need now, is a Boat..
Que referencia es esa pistola,cuánto cuesta,es urgente gracias
El gelcoat es puro o lo ligastes con acetona?
what psi are you spraying the gel coat?
Can anybody tell me what is the name of the cart where he unroll the paper to isolate the painting area ? Where can i find it to buy or do by myself ?
www.starchem.co.uk/products/masking.htm
Ive used this one:
www.todayshomeowner.com/video/combination-painters-tape-and-masking-film-dispenser/
Its ok, but has a slight head ache factor.
Can anybody tell me if they’ve ever sprayed gel coat, if so is it normal for it to orange peel? Is it just because the nature of gel coat to get that way or I’m not adjusting the spray gun well?
I have a Fuji HVLP T75g & 3M PPS. This gel coat I sprayed is really thin, not like typical thick gel coat, sold by Lilly Ram
How many coats are you putting on? Normally 3rd coat is when orange peeling effect occurs but you will probably need at least 3 coats anyway depending on the projects you’re working on. Hope this helps
Yes it will peel. If it’s not orange peeling your doing it wrong. If you use Duratech High Gloss Additive to thin the gelcoat you will find you get little to no peel. Although, it’s quite expensive! NEVER EVER EVER use Acetone to thin, or styrene or MEK (not MEKP, that’s hardener). Only use patch aids like duratech, fast patch any spectrum or polynt patch booster. Good luck!
how many time does he say 3M................................
many :)
thames Ranger it's by 3m
I counted thirteen.
no idea. i stopped at 1:25
Why remove the filter?
Gelcoat is to thick so it will become a blockage.
How much hardener is to be used?
Antjan46 what you use to reducer gelcoat?
2% by volume is recommended. But you can catalyze from 1-4% depending on temperature and color of gelcoat. Darker color’s require up to 4% MEKP.
can Gel Coat be used on pontoon boat's wooded deck?
yes, likely will unbond itself over time... likely will crack from the flexing... but certainly it can be used on wood.
G100-6 seems more versatile with less disposable components
The disposable parts are the genius of the system. Once you're done throw it away saves time, headache, and every time you use it, it works like brand new (because it is new).
Try spraying a dump gun vertical
g100 dump gun better system
experts by the score.
This is a completely mislabeled video.
That plastic gun is a joke
It's kick butt, I have the normal accu spray. Such a time saver, and sprays primer like a champ.
How gelcoat thin?
Yes
Yes
tous du plastique , encore un pot de yaourt avec une date de péremption , grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr