- Видео 15
- Просмотров 632 897
3M Marine
Добавлен 16 дек 2014
3M Marine.... Your First Choice for Service, Solutions and Satisfaction.
For more information email us @ 3MMarine@mmm.com OR visit us @ 3mmarine.com/
For more information email us @ 3MMarine@mmm.com OR visit us @ 3mmarine.com/
3M™ Self-Stick Liquid Protection Fabric
3M™ Self-Stick Liquid Protection Fabric is excellent for protecting gelcoats, wood, reinforced plastics and other valuable surfaces in marine manufacturing and repair. It’s ideal for busy facilities with lots of foot traffic - it resists abrasion and light impact. It prevents even harsh grease and oil from soaking through. And it helps prevent dirt from spreading around by trapping it in the nonwoven surface. 3M™ Self-Stick Liquid Protection Fabric rolls on smoothly, sticks firmly to almost any substrate and peels up cleanly without residue. You can even use 3M™ Self-Stick Liquid Protection Fabric to replace time-consuming paper-and-tape masking. It also resists UV, so you can use it outd...
Просмотров: 3 786
Видео
3M™ Marine Adhesive Sealant 5200 Zodiac Testimonial
Просмотров 8448 лет назад
For more information about these sealants, please visit: 3mmarine.com/products/bonding-sealing/adhesive-sealants
3M™ Marine Adhesive Sealant 5200 Through Hull Testimonial
Просмотров 1 тыс.8 лет назад
For more information about these sealants, please visit: 3mmarine.com/products/bonding-sealing/adhesive-sealants
3M™ Marine Adhesive Sealant 5200 Levers Testimonial
Просмотров 6288 лет назад
For more information about these sealants, please visit: 3mmarine.com/products/bonding-sealing/adhesive-sealants
3M™ Marine Adhesive Sealant 5200 Catfish Testimonial
Просмотров 4158 лет назад
For more information about these sealants, please visit: 3mmarine.com/products/bonding-sealing/adhesive-sealants
3M™ Marine Adhesive Sealant 5200 Bilge Pump Testimonial
Просмотров 1,3 тыс.8 лет назад
For more information about 3M™ Marine Adhesive Selants, visi: 3mmarine.com/products/bonding-sealing/adhesive-sealants
Acabado de Resina (Gelcoat) en Barcos en un Solo Paso
Просмотров 40 тыс.8 лет назад
Description Visite nuestro sitio: 3mmarine.com/products/compounds-polishes/buffing Procedimiento Estándar de Operación de 3M para el acabado de resina, más conocida como gelcoat en barcos, lanchas y embarcaciones pequeñas, en un solo paso.
The differences between buffing gelcoat and painted surfaces
Просмотров 13 тыс.8 лет назад
Here, we explain the differences between finishing painted surfaces and gelcoat surfaces. For more information please visit 3M Marine @ 3mmarine.com/
Gelcoat finishing with 3M™ Perfect-It™ One Step Products
Просмотров 6 тыс.8 лет назад
The 3M™ Gelcoat Finishing System includes two ways to clean and protect your boat in one step. For more information please visit 3M Marine @ 3mmarine.com/buffing
SOP for Gelcoat Finishing
Просмотров 26 тыс.8 лет назад
Here's a quick look at the standard operating procedure for finishing marine gelcoat. To find more information, including SOP charts and other videos, please visit 3M Marine @ 3mmarine.com/buffing
Introducing: 3M™ Gelcoat Finishing System
Просмотров 9 тыс.8 лет назад
Meet our newest line of Gelcoat products, now part of the Perfect-It™ line. Our gelcoat buffing products are formulated specifically for your gelcoat surfaces, making it easier to achieve a perfect gelcoat finish, every time. .For more information please visit 3M Marine @ 3mmarine.com/buffing
Procedimiento Para Acabado de Resina (Gelcoat) en Barcos
Просмотров 93 тыс.8 лет назад
Visite nuestro sitio: 3mmarine.com/products/compounds-polishes/buffing Procedimiento Estándar de Operación de 3M para el acabado de resina, más conocida como gelcoat en barcos, lanchas y embarcaciones pequeñas.
Bottom Paint Small Area Repair
Просмотров 3,6 тыс.9 лет назад
For more information please visit 3M Marine @ 3mmarine.com/
Gel Coat Finishing
Просмотров 7 тыс.9 лет назад
For more information please visit 3M Marine @ 3mmarine.com/
Gel Coat Application
Просмотров 426 тыс.9 лет назад
For more information please visit 3M Marine @ 3mmarine.com/
What else that would have saved the day is if you ditched that shit background music playing so loud you can't even hear what you are saying.
omg how many times have to say perfect it?
Is 3M Heavy Cut Marin compound a diminishing abrasive? As in it cuts heavy at first but breaks down into a finer compound as it’s worked to give a more polished look. Or does it just keep cutting like an aggressive compound leaving scratches that will need cleaned up with a finer compound. Thanks in advance
Is possible to put gelcoat in a surface epoxy
other gel coat guns use a 4 to 6 mm spray nozzle. The HGP gun says comes with 1.8 & 2.0. Does the pressure on the pot lower the size of the orifice required ? Does is have a better atomization pattern than other dump guns ?
You did not use a hardner ?
what psi are you spraying the gel coat?
Que referencia es esa pistola,cuánto cuesta,es urgente gracias
Why remove the filter?
Gelcoat is to thick so it will become a blockage.
Can anybody tell me if they’ve ever sprayed gel coat, if so is it normal for it to orange peel? Is it just because the nature of gel coat to get that way or I’m not adjusting the spray gun well? I have a Fuji HVLP T75g & 3M PPS. This gel coat I sprayed is really thin, not like typical thick gel coat, sold by Lilly Ram
How many coats are you putting on? Normally 3rd coat is when orange peeling effect occurs but you will probably need at least 3 coats anyway depending on the projects you’re working on. Hope this helps
Yes it will peel. If it’s not orange peeling your doing it wrong. If you use Duratech High Gloss Additive to thin the gelcoat you will find you get little to no peel. Although, it’s quite expensive! NEVER EVER EVER use Acetone to thin, or styrene or MEK (not MEKP, that’s hardener). Only use patch aids like duratech, fast patch any spectrum or polynt patch booster. Good luck!
And if you get thirsty, drink our 3M fresh water, after that visit our 3M toilet to pee if you need to.
🤣🤣🤣🤣
Harbor freights $15.00 spray gun works just as well, but soon they will probably be know longer available, if you catch my drift. Made in America
How much catalyst you put in to a quart of gel coat
Excelente en Colombia donde consigo los productos gracias rioaventuras3000@gmail.com
I hate mixing, testing and cleaning up. If I have a small job, I order the gel coat spray cans from dolphinite. They'll mix custom orders from a paint chip or swatch. I heard they had some problems in the past, but my experience was recent, and no problems for me.
How gelcoat thin?
Yes
Yes
Next time you guys think about doing a demo, call me. I hate watching you waste all that money on actors "playing" detailer again and again. I'll bet my car that between me, my technique using your stuff and anyone you choose next time doing it your way (sells tons of stuff right?) and my section will score higher on a gloss meter and last longer. Get on my level! Ugh, bad kids
I've seen your similar comments on other 3M videos, yet I don't see any video tips about buffing/compounding from you.
Dan, Local Boy knows what’s up, TRUST ME
Next time you guys think about doing a demo, call me. I hate watching you waste all that money on actors "playing" detailer again and again. I'll bet my car that between me, my technique using your stuff and anyone you choose next time doing it your way (sells tons of stuff right?) and my section will score higher on a gloss meter and last longer. Get on my level! Ugh, bad kids
Sooo, is this made by 3M perhaps? Im not sure, dont think they mentioned it enough times. Can we have a 3M count?
I love 3m but wowwwww. Pump the brakes Bois.
Why can't you guys just hire a good detailer to demo your shit?
This 3m line is horrible. Except the heavy cut compound which must be stirred every month or so (it seems) or it becomes a solid ball at the bottom of the bottle. But, in its natural state, it's fine. The rest, carnuba-based (note to 3m: the 1950's happened a long time ago. Lots has happened) So, they want you to buy lots of their products to keep your boat looking new... Old game. I can use their stuff but add a step or three (dozen) and blow that finish away both in gloss and especially longevity. You don't even have to be a professional. Stop using carnuba! (unless you love the smell like I do) seriously, STOP! 3M, STOP! Their buffer: like holding a vw thats all turbo. Heavy, loud and the weight isn't balanced. A clear case of engineers not asking a detailer how a buffer should be built for us. I helped design a buffer (unnamed here) If you do boats, then you probably will or are already using it. ( I offered the design to 3M, they went another direction again) I'm disappointed
This 3m line is horrible. Except the heavy cut compound which must be stirred every month or so (it seems) or it becomes a solid ball at the bottom of the bottle. But, in its natural state, it's fine. The rest, carnuba-based (note to 3m: the 1950's happened a long time ago. Lots has happened) So, they want you to buy lots of their products to keep your boat looking new... Old game. I can use their stuff but add a step or three (dozen) and blow that finish away both in gloss and especially longevity. You don't even have to be a professional. Stop using carnuba! (unless you love the smell like I do) seriously, STOP! 3M, STOP! Their buffer: like holding a vw thats all turbo. Heavy, loud and the weight isn't balanced. A clear case of engineers not asking a detailer how a buffer should be built for us. I helped design a buffer (unnamed here) If you do boats, then you probably will or are already using it. ( I offered the design to 3M, they went another direction again) I'm disappointed
El gelcoat es puro o lo ligastes con acetona?
Como se llama el transparente que se le echa despues de darle el brillo al gel coat para darle un mejor acabado
Join my group on Messenger by visiting: m.me/join/AbYdNrdEnBEy0BsG
That plastic gun is a joke
It's kick butt, I have the normal accu spray. Such a time saver, and sprays primer like a champ.
No entiendo los no me gusta fantásticos productos y calidad superior.
tous du plastique , encore un pot de yaourt avec une date de péremption , grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
que lancha?
G100-6 seems more versatile with less disposable components
The disposable parts are the genius of the system. Once you're done throw it away saves time, headache, and every time you use it, it works like brand new (because it is new).
Try spraying a dump gun vertical
Can anybody tell me what is the name of the cart where he unroll the paper to isolate the painting area ? Where can i find it to buy or do by myself ?
www.starchem.co.uk/products/masking.htm Ive used this one: www.todayshomeowner.com/video/combination-painters-tape-and-masking-film-dispenser/ Its ok, but has a slight head ache factor.
I'm ready, all I need now, is a Boat..
And use your 3M work cart ,,,,,
hermosos trabajo lastima que no se donde poder conseguir estos productos en mi pais que lindo brillo excelente video
experts by the score.
This is a completely mislabeled video.
can Gel Coat be used on pontoon boat's wooded deck?
yes, likely will unbond itself over time... likely will crack from the flexing... but certainly it can be used on wood.
g100 dump gun better system
How much hardener is to be used?
Antjan46 what you use to reducer gelcoat?
2% by volume is recommended. But you can catalyze from 1-4% depending on temperature and color of gelcoat. Darker color’s require up to 4% MEKP.
Say 3m a few more times guys. I didn't catch who made all these products.
how many time does he say 3M................................
many :)
thames Ranger it's by 3m
I counted thirteen.
no idea. i stopped at 1:25