The Honda S2000 Finally Drives After Sitting For 2 Years!
HTML-код
- Опубликовано: 29 авг 2023
- What's going on guys in todays video we Finally Got the s2000 running!
Check Out Apex racing wheels Here bit.ly/431YwJ8
Check Out Apex racing wheels Here bit.ly/431YwJ8
Check Out Apex racing wheels Here bit.ly/431YwJ8
------------------------------------------------------------------
Check out my brothers! Channel / 23rdgarage
Subscribe! ► / vtuned. .
Instagram ► / vtuned
---------------------------------------------------------------------- Авто/Мото
S2000 engines are so much easier to to just drop the subframe rather than pulling the engine out of the bay. Great content👍🏼
Dude, I remember when you picked this car from goonzquad. It was pretty much a shell..... you guy did a great job turning a red oem paint into yellow. Great job swapping the motor, was surprised that it started that quickly.
Put that strut tower brace back in it too...will help stiffen up the front end when cornering and such
You should change the instrument cluster from the blue car to the yellow one to match the mileage 😊
you should use that factory airbox. Keep this car as stock as possible. Unmolested. Little red parts car has come a long way. Nice job, guys.
While the engine was out of the car it would have been a great time to replace the timing belts etc.
I agree although they were in hurry here and i am pretty sure the owner will done more as Ben explained by the end of the clip seats, door cards, exhaust, rubber-belts new air-filter are on the way etc.. they just wanted to make it run to make more room inside the shop for Ben's next projects.. as it is the little Honda S2000 turned awesome..
Clutch and rear main seal too
@@poplaurentiu4148the S2000 uses a timing chain kinda like k20/24's
@@bradbozarth3235 Ok but it still have what is called "accessories belt" that if you look at any stock OEM un-modified factory S2000 and is positioned outside te engine behind the front air filter box and connect alternator, oil-pump, water pump, climatic pump and other pulleys and sometimes the fan for cooling radiator in front ? that is usually a rubber-belt not chain.
Do you see a timing belt cover? lol
Looks great! I’ve owned 11 s2000’s and have always loved them. Two minor suggestions- paint the headlight brackets either black or yellow, that car is too nice to have those miscolored pieces on there, especially with everything else looking so nice. Second, it looks like the H emblem on the front bumper is crooked, may need a slight adjustment. Keep up the good work!
You’re just not picking now. Settle down buddy
I love that yellow. Painting that whole shell may have been a pain Ben but I guess it will last a lot longer!
Gotta show goonzquad , take it to em and get their reaction
Vtuned, I have so much respect for you. I see you have absolutely no problem working alone so long as the job is getting done. Great job 👍
This was such a great video Ben! You & Victor knocked it out of the park. Too bad the little blue guy had to give its life, but that’s the way it goes sometimes. Be sure and do another follow up video when Victor finishes everything up. See you in the next installment.
I'd put the engine,wheels and taillights, interior panels from the blue one. Looks amazing!
Glad to see you catching up on older projects,makes shop look good.just keep focusing on the cars,finish up others,that way you can possibly decide to sell some them and clean up your outside of shop.kudos to you and your friends for helping you out.just continue on doing what your doing.great video 👍👍👍😎😎😎
You are an awesome mechanic...car builder...like all your videos it has inspired me to fix my own car.. great job Ben...God bless you and your family
😅
Great video Ben. Of course it ran first time...that's just the way your life is running...good!
May your good fortune continue. Cheers from the UK, Bob
Tell him to straighten that Honda logo. 😂
It fell off a bit later, don’t think it was even attached
"act like you're working..." LOL 15:47
Your quite the mechanic Vtune. Replaced a transmission in a C8 Corvette and installed an engine in a S2000. Pretty cool how the S2000 started right up.. Good job!
Got yourself a sweet ride. Get a short shift upgrade, extend the pipe after the ball joint down on the shifter. Makes for fun driving.
You the man V.👍
Awesome as always.Thanks for sharing and taking us along
Ben, great job as always! You’re a fine young man! If the wheels on the donor car are OEM, I think black would look better on the yellow car. Either way, it looks amazing!
Wow The Honda finally on the road. Looking great. Great that the car is staying in the family. Take care.
Good to see that project come to an end. Awesome work bud.
I wasn't surprised it started right up, you and all your brothers are skilled
That engine in proces was beautifully filmed. Thank you.
Nice work and another one out of the door to a proud new owner! 🙏
Powdercoat black the strut bar. Thought you had the original from the green car the goons had. That engine was definitely rebuildable. Car came out great looking
I liked when you said "act like you are working" ! Lol
Keep going i like these hondas videos !! Whats next acura nsx ? 🤭
Love the yellow! You really ought to put the strut brace in. These cars are a little heavy and on the turns, especially since it's a convertible, you'll get some body flex.
again Ben, you are a magician , love to watch you do your magic
Cranked right up after years. Honda. Good stuff. Nice content
Great job guys...I love the S2000 so fun to drive...
I was coming here to mention how the [H] emblem looked crooked but then I saw when you took the bumper off, it wasn't put on properly yet, phew, lol. Amazing car
Ben, you make it look so easy. You’re quite talented!
Looks good! Nice job guys!
FYI for the S, the proper brake bleed procedure is RF, LF, LR, RR. It's a bit funky and irregular but that is what's recommended.
Put the cr gauge cluster in the yellow 2k
Honda power maan! You will love this motor/car!
That's a fastest engine swap ever seen my life man you guys do great work
Great to see you pumping content again Ben!
incredible transformation!
Now to see that old Mustang run again
Thank you Ben, for another awesome video!😎👍💯🔥🔥🔥
it must be satisfying to get a car driving after completely rebuilding it like you did.
Great work man
Great work as always thanks vTuned
Ben that's great for the older project ,now we are demanding 1965 mastang
Nice job. Another quality build. Quick question you willing to sell the steering wheel and cluster out of the CR? Let me know.
Nice work Ben, now all we need to see if you finish a vintage Mustang and you will have completed RUclips ;)
🌴was wondering when you were gonna finish it , I’ve gotta say it’s a pretty sweet ride , could use a little fine tuning but your bro can handle that , 👍😁
great like all the others...love this channel. Ben is one of the youngest smartest creators in the business'
Awesome job!
V tune does not edit out his bloopers. I love it
Dude!! I love your work!
Hondas! fires right up!
It took a while but I think it was worth the wait to get exactly what you want. Thanks Ben.
Super cool that you're putting out a new video every day. Pretty soon you'll have more money than Cleeter 😁
Nice work guys
didn't even watch the video i just want to say thanks for your content, i rly appreciate it
Good Job guys, a few bugs and your off to happy motoring.
My favourite car! I hope to see it finished and With bolts on
Hey VV tune next time you go to the junkyard, go to the minivan section and get the longest seatbelts you can cut it out and then you use it for all your engine pooling works like a dream get as many seatbelts as you want. They are strong will the dead thing that you was using to put the 2000 engine in so seatbelts buddy
I recently did a video trying to bleed the brakes on my 2004 expedition with the same vacuum pump tool and I found out that I will need to use a scan tool to bleed the ABS system. So I ordered a tool that has this funtionality (not all do) and when it arrives I will bleed the air out of the abs unit by pushing a button and watching the air bubbles cycle out of the unit. I bought a cgsulit sc630 scan tool on ebay for $136 to perform the ABS bleed.
Cute lil cars to go touring in!
Hello Ben vtuned Garage very good nice job on Honda s2000 very good job vtuned and brother in laws very nice good looking new car how I love like support and number one ☝️ people worldwide big fan of Ben vtuned Garage happy on RUclips channel videos
Elle est vraiment superbe cette S2000 finalement notre attente est récompensée par une superbe vidéo 😊
the car looks brand new another amazing job. will it be sold? when and where and can i bid on it?
Great job
Spiff my boy!!! 👌🏻
Brilliant job well done 💆🏿♂️👍
Nice! Keep it goin 💪
Tell Victor Igor Prus says hi from oregon, miss that dude
Don't sell the Power Steering Rack for the S2000, they are like "Hens Teeth" to find if yours goes bad.
Another great video
That’s Honda for you will run all the time!
Put the cr speedometer in it for the originality 😊
Car looks sweet
great stuff thanks
Magnificent job👍👍🤞
monster!!!!!!!
It's time to pave the driveway VTuned.
Should try the black wheels from the parts car They would look nice with that yellow 🤔
nice hope to se it finis
I love it when v-tuned glitches 2:20
Dang son this is awesome!
Listen, I love your videos and your grind...but do you proof watch and edit at all?
Love that color.
Good job ❤
It wasn't nearly as hard to put back together as the McLaren was! But it is nice to see this little Honda back to doing what it does so well.
put it on the frame machine and lets see what happens ? i would love to see this!
Ben, I am so glad you got that S2000 Running. Now I would put those black wheels off the parts car on it. Those Aluminum silver wheels look kind of lame.
I still see this car red 😂 IMHO a car like this would have deserved a full sandblast.
Solid build on the s2k, Hondas always start so easily after major work like that lol. Engine bay looks amazing. Sad to see Vlad’s s2k as the donor car 😢
Yeah I was thinking that looks like the one Vlad had, same spec same color
It was his.He had the wreck that took his 'dream car' off the road after all his hard work making it minty.@@wideawake11
I still got the cr wing that came off that car. Thanks by the way
Would like to see this make an appearance in a future video once it's all buttoned up!
Looks good boys.
Black rims. Honda is the best . You have to make another video when the S2000 is 100% complete.
its crazyyyy how that engine bay is like almost 50/50 engine and airbox lol
Are you gonna re-tape the windshield trim black?