Which year is it? Anyway while google it I found all S60 ones mentioned are CAN based. So, basically you have a 12V, Ground (-) , CAN high pin& CAN Low pin. That’s all will be needed. I’ve given a link below for the pin out. www.digital-kaos.co.uk/forums/showthread.php/528516-Volvo-s60-dash-pinout But the issue is unlike the BMW E36 or Audi A4 older clusters without CAN I’ve used here the Volvo S60 needs it’s corresponding can bus codes and you will need to setup corresponding arduino code to get it running.
And what's with indicators and other lights? Can I choose them also from this menu and choose it for example: pin 6 is now the indicator left and pin 7 is the indicator right Does it work, or do I need a relay to use indicators?
Well the fuel in the actual car definitely works on float resistance sensor. Temp also I believe should be same. What I did was play with the output PWM values in the simhub until I got it to work with the games. I don’t remember the exact values since it’s been a long time now.
Sorry for late reply. Could you record a clear video of the process you are attempting and then upload it to cloud and send the link. It would make it much quicker to understand and probably I can help you faster.
I had a Volvo S60 cluster coming, but the Post Office is not delivering it, what pins do I need for the Volvo cluster to work? (aka a DIM cluster)
Which year is it? Anyway while google it I found all S60 ones mentioned are CAN based. So, basically you have a 12V, Ground (-) , CAN high pin& CAN Low pin. That’s all will be needed. I’ve given a link below for the pin out.
www.digital-kaos.co.uk/forums/showthread.php/528516-Volvo-s60-dash-pinout
But the issue is unlike the BMW E36 or Audi A4 older clusters without CAN I’ve used here the Volvo S60 needs it’s corresponding can bus codes and you will need to setup corresponding arduino code to get it running.
ruclips.net/video/wLj1aOPjB_4/видео.html this tutoria, is specific for Volvos S60
And what's with indicators and other lights? Can I choose them also from this menu and choose it for example: pin 6 is now the indicator left and pin 7 is the indicator right
Does it work, or do I need a relay to use indicators?
Hi, I’ve explained about this to your other comment in a different video.
@@randomscience4k Thanks for your attention!
how to get the fule and temp gauges working
Well the fuel in the actual car definitely works on float resistance sensor. Temp also I believe should be same. What I did was play with the output PWM values in the simhub until I got it to work with the games. I don’t remember the exact values since it’s been a long time now.
hi sr,do you have the sketch for this?the number of each pin?thanks
Hi,
Which cluster? E36?
@@randomscience4k yes,i have tried 100 times with the sketch of am studio and some other and nothing, not even the arduino load,always error.
Sorry for late reply. Could you record a clear video of the process you are attempting and then upload it to cloud and send the link. It would make it much quicker to understand and probably I can help you faster.
@@randomscience4k do that
can someone link me the arduino code for the E36 cluster ?
Check description of the video ruclips.net/video/pw7UCJmLgCk/видео.html
Tanks for the link. But how did you get abs lights to work and turn signal lights.