Видео

$300

@@randomscience4k cool !! You have some projects With it ?

Thanks for the concern 😀..but these are just testing setups only. My main simrig is a f10 is almost ready. Just waiting for the dash. These are not meant to be permanent or extended use

cool! ​@@randomscience4k

Not sure, I’ve not tested it with forza

I see you have already asked this on the discord channel. Btw do you still need the Pinout ?

Hi, I don’t sell any hex codes. All codes used are free on my GitHub page.

It is indeed

Here you go: 1drv.ms/i/s!Ag5Te4aKhAY2_GfZG61NrRpQ2XiD?e=ccWHCF

You need to substitute/ add the ncalc variable for parking brake. Then just pull the corresponding serial data from Arduino and enable pin to go high or low depending on your relay wiring setup.

@@randomscience4k yeah i got it All working. 8 different lights and an oled display in the middel. 😅

Amazing! Glad to hear you got it working 👍🏻

Hi, I assume you are referring to the k-bus circuit. If you are not familiar with circuits I would advise you to take someone’s help or buy this pcb made by one of our discord group members: www.e39simrig.lol/k-bus-pcb-ordering

@@randomscience4k yeas K-bus

I agree..but if you keep looking you might get lucky sometimes on eBay..I got it for $40 including shipping a few years back

So, to control the headlights it turns out there is a light module and the Pinout in Newtis is only For that. I was trying to find the Pinout of the FLEL/FLER module, but since it’s part of the headlight assemble and needn’t be used separately BMW hasn’t given that info. So, my low beams have 6 LEDs in parallel. So, 12V didn’t do anything. So I realized the led driver module must be a DC-DC boost converter too, tried it gradually by raising and beyond 15V it slowly started becoming brighter. That’s how I figured it out.

😄 this video was posted long ago..was only a few days since I got it. It’s all figured out and I have working code for it since a while now.

It is a nice cluster I gotta say!

Just found the ad and you’re right..looks similar to

Pin 17? It’s a no Connection pin

Amazing! Are you finished with your setup or it’s an ongoing project?

😬😁

Hello, you need to find the can bus ID information of your cluster to do it, either by brute force method or by logging can IDs from your vehicle. Also, does the Pajero show launch control message on its cluster when launched?

@@randomscience4k My dash doesn't have a digital screen , I understand from what you're saying that it's almost impossible for an ordinary user like me to do it , right? Is there a simple and basic way for me to connect speed sensors to Arduino? I just need to measure km/h

Hi, there are a bunch of libraries used. In the video description I’ve posted a google drive link to the entire library I’ve used. You copy the entire library folder and place it in your documents folder. Or if you have an existing library folder you can copy the contents of the files inside the library and paste it in yours.

@@randomscience4k Thank you, i am blind.

Hi, that's a nice cluster. You need to first find the can ID frames to get the cluster working. You can check online if someone has posted that info or try to log it from an actual car via it's can bus lines using an Arduino. You can then uses the information to modify the Ford fusion or BMW or Porsche code I've on my GitHub. You can find the links to those from my other videos. Your cluster may share some similar IDs to the Ford fusion.

It indeed is 😃..that's what really caught my attention of this unit first

There is one beta sketch on my GitHub..but now working on a more direct Arduino IDE version instead of VS code

Yes , one should be fine

??

Thank you very much! That's great... appreciate it very much! Sure I'll reach out..Had taken a break from the simrig & cluster projects for a while 😀..got busy with some new project..I need to resume the fusion cluster project now..moved on to a more refined simpler Arduino code now.

Thank you! I've a code for Arduino based on python that you can use like in the video, the below GitHub link should lead you to their. But I'm working on a new code that will be more simpler to just load via Arduino IDE soon. This will support BeamNG also and maybe work on Asetto corsa also. github.com/VintageCollector/cluster-dashboard-ets2-ats/tree/Porsche-Panamera-970 Also, all the can IDs I found for the Panamera cluster can be found on my blog below: random-science.com/2022/12/19/playing-with-a-2010-12-porsche-panamera-4s-970-cluster-with-can-bus/

Hi, thank you! To power up newer clusters you need the ignition can ID frame and its corresponding bytes to be send to the cluster via Arduino. Now your last sentence isn't very clear, do you mean to find the DTC and can IDs stored in cluster? If yes I think there is a way, but I'm not very familiar with it. We have some folks in my discord channel who are aware of the technique to do this and maybe you can reach out to them and find out. There are members who have VW clusters, so they should be able to help you out.

@@randomscience4k It would be great. There is generally no one interested in VW clusters in Turkey. Just when I was about to give up hope, I came across your videos. Thank you very much.

@@randomscience4k Let me explain it this way. I connected Can Low and Can high. When I say connect after selecting the com port. A message should be sent to the section labeled Receive (Monitor), but it does not. In other words, my Cluster does not connect with my CanBus module. (By the way, my English is not good. I am writing with the help of Google Translate, sorry)

I want to ask one more question. I also use Seedstudio as a CanBus module. Have you soldered anything to the bottom of the board? On the Seedstudio website, it says that soldering is done between the pins, that's why I'm asking. Please forgive my ignorance​@@randomscience4k

@Hellennnn no worries..feel free to ask. I don’t check my RUclips notifications a lot, so there could be delay at time. Myself and another member have responded to your question on discord. Well there is the 120 ohm bridging pad, in my case I cut it when testing an E90 cluster. Else it wouldn’t work. I do not have a vw cluster, but when tested with an Audi a8, I don’t have to bridge it.

Not sure, but I had a 2018 altima cluster and could not get anything to happen on the cluster with a can generator, later learned that Nissan started using extended CAN IDs. So, unless you have the can log from an actual car it's not gonna be easy as using a can generator means it would take a very very long time to get the IDs and register them. If you didn't buy it already, don't get it. Look for Nissan older than 2012. They using simple can bus I think.

@@randomscience4k Alright i already have the gauge cluster, i also know a few people who have that model altima. i also have a 2015 infiniti q50 and im gonna see if i can do anything with it. thanks for your response.

@@BadDriversOfBeamngDrive Good luck! 👍🏻

The relay you are using is a shield type that goes on top of Arduino, more compact. As for the one in video, on the input side: there is power Vcc& GND, the IN1, IN2 etc are inputs that gonto corresponding Arduino pins for various lights mentioned in video. On the relay side you connect the 12V to thr COM terminal of relay. Then for the cluster light wires (high beam, turn signal etc) to the Normally open or closed terminal accordingly.

Yes, I've the wiring for this cluster. And sketch is already flash file is already under the beta-sketch section on my discord channel. I've not tested on AC, but I guess it should work. You can find the link in the video description. That's nice! The 370z is also a great cluster.

If this was for real w/o side effects, this is gonna be selling like hotcakes 😄..I mean people already love anti-ageing cream.

Hi, cluster here is only for the pre-2000 model that is analog type. The code for it is below in description. The 2000 and later models have two can bus and you need to find the IDs and make a code for it. Unfortunately I don’t have the cluster or can IDs for it. I believe the clock in your cluster is a digital one? www.audiworld.com/forums/a4-b5-platform-discussion-1/understanding-differences-between-audi-a4-clusters-compatibility-issues-2797763/

Thank you!

@@randomscience4k What is the communication speed when exchanging data from simhub to Arduino? I am using UNO!

It should be 115200 baud on the sim hub Ncalc section.

@@randomscience4k all right! So does SimHub run at 60fps?

Well I know that the paid license removes thr 10 fps restriction. Will it goes to 60 fps I don't know since I have not check with an fps counter. But sometimes simhub plugins can reduce frame rates below 60 fps.

Thank you!

The S2000 is an awesome cluster. In fact I would rank among clusters #1. Would make a perfect one on a sim rig 👍🏻

Thank you! 😊

Ohh didn’t know about the transmission thing..that’s nice to hear that. To me the A7 & A8 looked the same. Only reason I got this A8 was that it was only $28. Didn’t know it was a W12 either. There was no mention of anything in description apart form it working.

very good I really like using the panel to play

Thank you!