Cobra 29GTL/LTD and 25GTL/LTD channel kits
HTML-код
- Опубликовано: 14 окт 2024
- These kits are for the Cobra 29GTL/LTD and 25GTL/LTD and other radios that use the same chassis. These kits are Expo 100A and Expo 100S kits.
These kits will give 40 channels above 40 and 40 channels below 1. Also the single crystal kit will give just 1 band of your choice high or low. Kits are easy to install 3 wire and 4 wire. Cobra 29s are 3 wire and the 25s are 3 or 4 wire.
On the 25s there is a trace cut and a capacitor to add and the 3 or 4 wires to solder in. Should know how to solder and follow directions.
Radios will need to be retuned for power and audio slightly to balance out for best performance.
these can be bought direct off Facebook just google dj56cbsales and message me or email me at dss56@hotmail.com. I use paypal for payment only. Thanks dj56cbsales also look for my noise toy SD boxes Tweety bird boxes 150 Roger Beep boxes and Voice changer boxes on youtube and my facebook page. Also listed on ebay but you will pay the fees/taxes there.
Nice
the injected freq on a 25 for lowers is 9.79mhz right? im having trouble finding crystals for that. basically built the expander160 with the oscillator right near the vco, and diode switching to the face switch to eliminate stray capacitance in signal leads.
I would like low 40 kit for 25ltd classic Mine has newer front mic connector type chassis I d like get 26.505-.955 .
Plus normal 40 stable freq on AM.
Link to your site & prices .
.
it would be 26.915 to 26.955
Facebook dj56cbsales
@@dj56cbsales So couldn't get full 40 channels below ? 26.515 to .955 we here it's quiet.
That would work best if use have Ed cobra 29Gtl with 40 - +/+ kit in it worked well it was only expander 100 nkit from a red box from 1980's someone gave me I had installed with instructions .
My uniden tray algo parecido y no se como funciona!😮
English please
How do I get a kit
What kit are you looking for?
here is my web page>>>>>> www.dj56cbsales.com/