I watched this video yesterday then replace my toilet after watching. I was by myself so this step by step tutorial madeit so easy for a 1 man change. I appreciate you taking the time to post this. I'm 69 and this saved my back. Thank you!
I wish I would have become a plumber. I went to college instead and what a waste of money and no passion for my job now at 54. I still love plumbing projects, although I haven't done it for 30 years and listened to all the complaints that I'm sure goes along with it, like all jobs. Love your videos.
I am looking forward to having to replace something on my toilet, probably the wax seal, to stop it from leaking from below. Your instructions for this install are very clean, very detailed and make it clear that a single individual is not SOL if they need to accomplish it. I must say that I appreciate the low volume of the background music, allowing me to hear your instructions without distraction. Finally, showing this install in a tight space is SO reassuring. I've seen "fake" installation videos in warehouses where they didn't show all the steps, nor why things are done, and the space is completely open, like no bathroom ever! I am putting this video in my bookmarks to preview multiple times and to use during the install if I get stuck. Thank you for your attention to detail and making this information and skill available to the general layperson. Cheers!
Thank you for this very clear description of how to do it. I'm a 64 year old woman and I've done toilets before but I always thought they were kinda hard, I'm going to be doing mine this coming week and this is very helpful. I also love the bloopers they're always so funny on TV shows and stuff and even a guy who's putting a toilet on haha😅
Thank you, thank you, thank you! For being so detailed. For showing every single step (not just telling). For considering that some people may be older or have bad backs (that's me). I'm a 63 year old woman who is trying to become more self-sufficient with chores that my husband normally does. I'm going to have this video handy in the bathroom so I can follow it step-by-step as I go along.
I'm jealous of how perfect your rough in and supply are. Your house must be very new. I think most people have to deal with replacing toilets on older homes and it doesn't go so smoothly. Another great video, thank you!
You are right - The variety of demons that can lurk under a toilet are large enough that I elected not to try to cover them all in this video - it was already nearly a half hour long. :) This was shot in a pretty new home, yes. I've replaced toilets in much, much older homes though, and other than being a bit more ... gross... have not run into any major problems. *knock on wood* Thanks for watching!
My luck runs like "most people." Any home repair or car repair I've found a video for on RUclips generally ends up taking two to three times longer in my case. I always run into some sort of complication or gremlin. So I just factor the extra time in from the beginning. ;-) :-( Thanks @AmplifyDIY for another great video.
This tutorial is amazing. I am reasonably handy but this is my very, very first time to tackle a project of this size. You offer amazing details and pointers on where things might go wrong. The video is exceptional. Was not planning on doing this project over Christmas, but my dad has the flu and my husband's arm is broken, so it's me :) Thank you thank you thank you thank you
I think you have done a great job. Easy to understand. An improvement: the nut on top of the bolt that holds the toilet to the floor. That was the only problem I had when I installed my toilet, the screws wiggled around & I never did get the screw on the left lined up properly, now here I am trying again. I am sure tightening the nut to make the screw stable is going to make the difference. Thank you so much! Judie
I was a little hesitant to replace my toilet but this video made me more confident in doing so. I thank you for the time you spent to help the diy in all of us
This is my first time ever replacing a toilet. We're switching to a 1-piece fully skirted unit that's taller and elongated. The detail in this video is excellent. As far as the caulking goes, I was not planning on doing it because of the reasons you identified. However, you are the only one to point out that it is required per plumbing code, so I'll make it happen. I'll either get a small tube or I'll look into a caulking tape.
perfect help for demistifying the process of replacing a toilet yourself. Followed it to the letter, and installed my own toilet and saved a bunch of money. Thanks so much!!
Used your step by step video to replace my toilet. Besides having to lay down Plaster of Paris to fix the tile being uneven, I was able to follow along your video step by step and knock out a project I had zero previous experience with. Thank you so much.
Whenever I install a new toilet I tend to caulk around the whole toilet leaving about a 1" gap at the back, Best of both worlds imo it looks great and you cant notice the lil bit that is missing at the back aswell as if a leak occurs most of the times it will be able to still be noticed. I am not a professional plumber by any means tho!
You did an excellent job with this. The up-close camera work is spectacular. I only wish that we could have that excellent view during installations! This is sure to help a lot of people. I'm not sure if you mentioned it when you ended up caulking yours to the floor.... but my tip is "all of the above." Caulk the front portion, and leave the back open. That way you prevent the external leak problem seeping under, you add some stability and aesthetics. But the back is open to show any leak from the toilet gasket. I've seen these new rubber gaskets, but haven't yet been brave enough to try one. Yes, the wax is a bugger to clean up! But that's because it sticks so darn well. I like knowing that the thick ring (with insert for sure!) has made full contact, and then you squish it down. With the rubber, I'd be worried that I'm not getting enough compression, or seal all the way around evenly. I've never had a quality wax ring go bad, and I've never had to re-do any that I've installed.... so I don't much care what happens *next*. :-)
Thank you so much for this video. After I was quoted $250 for replacing my toilet ( just replacing the toilet) I decide to do it my self, so far so good.
This was exactly what I was looking for! I’m fixing up my much neglected family cottage after my brother passed away and this was so easy to follow. I can’t thank you enough!
Great video! Here are some things to consider. I do caulk because my Florida house is built on a concrete slab, no wood under toilet to rot if there is a leak. If house is wood frame be sure to not caulk the back of toilet. I never used silicone because once it’s there it’s almost impossible to completely remove, especially on a porous wood floor. If the next toilet has a different footprint, well good luck. I use Dap Kwik Seal Plus clear. It is water clean up and completely waterproof. If gap is very uneven or toilet was shimmed then I would use white or biscuit to match toilet color. A bigger concern than overflow toilet water getting under toilet is it getting under the walls around toilet. Always caulk where the baseboard meets the floor and up the corner gaps a couple inches. White acrylic latex with silicone works great. My neighbor had a slow leak in the water line to the refrigerator ice maker and it went under the wall and cabinets causing $40,000 damage.
Thank you very much for a clear and very informative video on how to. I feel confident that I now will be able to install my toilet bowl successfully following your step-by-step video. Keep making more as you are good at explaining things in layman's terms.
As per usual, you have a wonderfully produced and easy-to-understand video that de-mystifies the process of whatever you're sharing. If I may, only one item of concern and its the gasket you used in lieu of the the wax ring. Those things can have all kinds of problems, similar to the wax rings with the built-in funnels. The problem is its flexibility, and I've seen this play out time & again on toilet installs. Each time you sit on the toilet, unless you are sitting down absolutely square on the toilet, you sit down at an angle and that pushes ever so slightly backwards on the toilet. Now at first, the closet bolts are tight and its not an issue. But over time with hundreds sit-downs, what ends up happening is the toilet pushes backwards on that gasket and the flange, because it is pliable, buckles inward and partially blocks the drain, and that starts causing backups. Basically all that flexing you showed in the video of the silicone gasket is the enemy. Even though wax rings are messy, they're still the gold standard and I only install basic wax rings on toilets. There's a reason why Kohler gives you a basic one. But, time will tell. Hope it works for you with no problems. Thanks for the time you spent in making this.
Excellent feedback, thank you very much! This is the first concerning thing I’ve heard about the flexible gaskets. Will keep my eye on it for sure. Thank you!
Hey Bullmoose - since reading your comment I've gone down a google rabbit hole trying to find more information about the failure modes of waxless seals... and I can't find anything about them failing in the manner you describe. By all accounts they are pretty robust, and offer lots of advantages over the traditional wax ring - including that they can flex a bit with slight shifts in toilet positioning without losing the seal. I'm not questioning your comment, but I'd really love it if you could point me to where I can read more about a waxless seal flexing under a shifting toilet to the point that it causes a blockage. Thanks!
@@AmplifyDIY sorry for the delay in responding. Didn’t mean to send you down a rabbit hole. In terms of what kind of documentation can you find, you won’t find the plumbing forums blowing up with this problem, nor is Fluidmaster going to mention this in their literature because this is really a field issue, not a design flaw in their product. My comments above were based upon seeing numerous issues with the wax rings with the integrated funnels. What ends up getting people’s attention is that they start seeing a little water seeping out of the toilet at the floor, not full stoppages. Pull the toilet and sure enough, the wax ring has shifted and you see the funnel slightly deformed against the inside of the closet flange just enough to where when the toilet is flushed, the water is partially diverted from the center of the waste line and leaks onto the floor. (Another reason not to caulk). I want to be clear that you may have absolutely no problem with your seal for the life of the toilet. Entirely possible. I’m just saying I’ve seen this very common problem with a similar design on the integrated wax rings, and given that your gasket is silicone, it’s even less rigid than the plastic insert on the integrated wax ring. Search some RUclips plumbers and you won’t see many of them using anything other than the good old wax ring. Probably far more info than you cared to read today! Haha. Thanks again and keep up the great videos.
Subscribed after watching this. I am the least handy person ever and I watched this and was able to do it. Even though it’s simple for some- this was a big deal for me to do. I’m proud and I owe you one 😊. Great breakdown and looking forward to more of your videos.
ive never done this by myself am not a plumber but really have no choice as im the homeowner, thx for this video, really needed these extra details, i hope to tackle this in next week or so
This was a great tutorial on how to do this. I had to replace three toilets in my home, and the first couple, I would stop and start again the whole time. Because he was so good at explaining every aspect, by the time I got to the third one, I was able to do it quickly and efficiently.
When I bought my house the first 2 years I couldn’t figure out why my half bath always smelled like sewer and I kept thinking it was coming from the toilet. I finally realized that there was no cocking around my toilet and once I sealed it, the odor was forever gone! Thank you so much for this amazing video. I am a 57 yr old female, have hated my toilets for 10 yrs and because I’m handy I never wanted to hire anyone who will likely charge me too much so now I have complete confidence after watching you that this is going to be a breeze! 😊
Wow! This was one of the best, most thorough videos that shows every step. I, personally, am still struggling with the problem of leaks from the tank bolts. Mine are not like those you showed. They come with rubber and metal washers and a double set of nuts for each bolt. I have tightened several times but still am seeing drips from the tank bolts... 😕. Can you suggest what I might be doing wrong? I am turning water on very slowly so I don't end up with too much leakage to clean up. Thanks for your video.
I like the metal bolts you showed. My plumber used a pair of $2 plastic ones. One of them snapped off, so now it needs to be fixed. The plumber that came today wanted to charge $495 CAD to lift and reset the toilet. That’s insane, which is why I’m going to try doing this myself. Great video!
You are about to save me $600 (plumber quote) I need to replace my fill vale but some previous genius homeowner cemented to the toilet! So now I need to replace the entire toilet. smh Thank you so much for this. I have a bit more confidence now.
Great video, very well paced and clearly explained. I caulk but at the back of the toilet leave a small 1/2 inch or less uncaulk area as an early point of notify me of a leak at the base.
A true professional makes Tricky And messy jobs looks very easy... Great job sir! I wish you could have been mine K. through 9th Grade teacher, More specifically, my Shop Teacher!
I am seeing this video 2 years after it was posted. This is an excellent video. but one thing that I have learned to help with placing the toilet on the studs on the flange is to put blue painters tape on the floor inline where the studs are. This allows you to line up the holes on the toilet with the studs much easier since sometime the studs and holes are hard to see looking down over the toilet.
this guide was VERY VERY VERY helpful!!! Installed a new toilet in my house today. And the recommendation of the non-wax seal was a great call. And this was my 1st time replacing and installing a toilet. Thank you for this video.
A feller just got home in the going to town rig after picking up a new commode, and I figured I’d go ahead and do the right thing and watch a how-to vidya first, and I landed here. This is very helpful and I appreciate you making the video. I feel ready to tackle this project after a cold snack or two. Hopefully I won’t make the bolts waaaay over tight…it’s fine.
I just replaced two toilets this week. On one the mounting flange was broken and required replacing. This was the easier one. The other one,the one that I expected to be simple turned out to be a real pain. The plumber that installed it had the flange 1/2 inch too high and it was held on by just the glue,no screws into the concrete. I had to take the new toilet back off and cut the flange off and put a low profile flange on,and properly drill and screw it secure. No more wax rings!
First... Love the VGG cap Second... Thank you for the video tutorial, going to change out the toilet in a building we are renovating for our second storefront location.
Excellent video. Also, I didn't know that the heavy plunging of the toilet bowl could cause leaking from underneath it because of an inadequate seal. That is a problem that I have every now and again with the toilet that I have. I was wondering why this problem only seems to occur when I use the plunger and sometimes for a few days afterwards.
Great video. I think I'll try to tackle this myself. Personally, preventing early leak detection to protect my subfloor seems like a big deal, so I'd probably opt not to seal it until I was selling the house and the home inspector required it.
As a certified master toilet technician [plumber] I suggest using a wet vac to get the water out of the old tank and bowl. Also, toss a bucket of water down the bowl after flushing to siphon more of the bowl water down the drain.
thanks, great video - except for one thing. Do NOT use caulk to fix a wobbly toilet. If it moves, it will leak. Fix the wobble first (shim or grout) then caulk it.
@@AmplifyDIY Full disclosure, I learned it from a plumber - I didn't figure that on my own! Nearly all of my good tips are borrowed from experienced people like you! I wish RUclips existed when I bought my first house 30 years ago. it was 100 years old and I tried to learn from TV shows and videotapes - and they make it look so easy!
i got the better than wax silicone ring. it works ok, i think but the commode rocks slightly. without the ring it is rock solid, so i may see how it goes. also the bolts to the flange kept popping as i tightened them. was a real bear. maybe it was because the old flange still had a little wax in it from the old seal and they were slipping.
it was a great video . could you explain if the toilet does not flush and clean 100%,what are the reasons and how to correct the situation . thanks, could it be vacuum problem?
Regarding the caulking, I've not done the install yet so I haven't tried it myself, but I've been advised that instead of dragging the tube along the gap, tip trailing and leaving a tube shaped line of caulking material, to Push the tube, leading with the tip as you squeeze the material out, The tip itself the extruded material into the gap as the tip moves forward and over it. This appears to have the same effect as going over the bead with a finger to force it in. It seems like it ensures fewer gaps due to uneven squeezing or air bubbles and removes the step of forcing it in with a finger or sponge afterwar and it looks tidier.
This is one of the best examples of "I've heard it both ways." - I'm sure either technique is fine. Experiment to see what you are most comfortable doing - and good luck!
Hello. Great video. We bought a house that has two short toilets, 15 inch from the floor, Crane brand. What would you recommend to replace them with and also the brand of toilet?
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
👍 Worth watching. It's a complete DIY project.
Great
I watched this video yesterday then replace my toilet after watching. I was by myself so this step by step tutorial madeit so easy for a 1 man change. I appreciate you taking the time to post this. I'm 69 and this saved my back. Thank you!
Glad it helped!
I wish I would have become a plumber. I went to college instead and what a waste of money and no passion for my job now at 54. I still love plumbing projects, although I haven't done it for 30 years and listened to all the complaints that I'm sure goes along with it, like all jobs. Love your videos.
Best simple description on how to install toilet that I’ve come across.so far.
Fantastic! I followed and today I installed my toilet, with no human help. Just me and myself.
Great job!
I am looking forward to having to replace something on my toilet, probably the wax seal, to stop it from leaking from below.
Your instructions for this install are very clean, very detailed and make it clear that a single individual is not SOL if they need to accomplish it. I must say that I appreciate the low volume of the background music, allowing me to hear your instructions without distraction. Finally, showing this install in a tight space is SO reassuring. I've seen "fake" installation videos in warehouses where they didn't show all the steps, nor why things are done, and the space is completely open, like no bathroom ever! I am putting this video in my bookmarks to preview multiple times and to use during the install if I get stuck. Thank you for your attention to detail and making this information and skill available to the general layperson. Cheers!
Thank you so much for letting me know it was useful to you!
Thank you for this very clear description of how to do it. I'm a 64 year old woman and I've done toilets before but I always thought they were kinda hard, I'm going to be doing mine this coming week and this is very helpful.
I also love the bloopers they're always so funny on TV shows and stuff and even a guy who's putting a toilet on haha😅
So WORTH TO WATCH THIS VIDEO. 🎉as a widow, I do a lot of maintenance at home. A guy charged me $200.00 for a 5 minutes work on a toilet 😢valve.
I'm glad you found this video useful. Thanks for watching!
This video is extremely detailed, awesome job! I just needed exactly this one. Thank you so much!
Glad it was helpful!
Wow! Love that I found you, thank you for expending so much time explaining the caulking dilemma. I'm a subscriber now.
Yes, thank you. Appreciate it.
Thank you, thank you, thank you! For being so detailed. For showing every single step (not just telling). For considering that some people may be older or have bad backs (that's me). I'm a 63 year old woman who is trying to become more self-sufficient with chores that my husband normally does. I'm going to have this video handy in the bathroom so I can follow it step-by-step as I go along.
Good luck! You can do it!
I'm jealous of how perfect your rough in and supply are. Your house must be very new. I think most people have to deal with replacing toilets on older homes and it doesn't go so smoothly.
Another great video, thank you!
You are right - The variety of demons that can lurk under a toilet are large enough that I elected not to try to cover them all in this video - it was already nearly a half hour long. :)
This was shot in a pretty new home, yes. I've replaced toilets in much, much older homes though, and other than being a bit more ... gross... have not run into any major problems. *knock on wood*
Thanks for watching!
My luck runs like "most people." Any home repair or car repair I've found a video for on RUclips generally ends up taking two to three times longer in my case. I always run into some sort of complication or gremlin. So I just factor the extra time in from the beginning. ;-) :-(
Thanks @AmplifyDIY for another great video.
This tutorial is amazing. I am reasonably handy but this is my very, very first time to tackle a project of this size. You offer amazing details and pointers on where things might go wrong. The video is exceptional. Was not planning on doing this project over Christmas, but my dad has the flu and my husband's arm is broken, so it's me :) Thank you thank you thank you thank you
You are very welcome - apologies for my delayed response. I hope the replacement went well for you!
I think you have done a great job. Easy to understand. An improvement: the nut on top of the bolt that holds the toilet to the floor. That was the only problem I had when I installed my toilet, the screws wiggled around & I never did get the screw on the left lined up properly, now here I am trying again. I am sure tightening the nut to make the screw stable is going to make the difference. Thank you so much! Judie
SUPER , AWESOME DEMO............VISUAL and VERBAL. !!!!!!!!!!!!!!!!! Dont need to say more !!!!!! Thank you so much
I was a little hesitant to replace my toilet but this video made me more confident in doing so. I thank you for the time you spent to help the diy in all of us
This is my first time ever replacing a toilet. We're switching to a 1-piece fully skirted unit that's taller and elongated. The detail in this video is excellent. As far as the caulking goes, I was not planning on doing it because of the reasons you identified. However, you are the only one to point out that it is required per plumbing code, so I'll make it happen. I'll either get a small tube or I'll look into a caulking tape.
perfect help for demistifying the process of replacing a toilet yourself. Followed it to the letter, and installed my own toilet and saved a bunch of money. Thanks so much!!
Very helpful and thorough video. This made my one person toilet install so much easier. Especially how you explained to disassemble first. Thank you!
Great to hear!
Any tips on picking up the toilet by yourself if you have a bad back.
Used your step by step video to replace my toilet. Besides having to lay down Plaster of Paris to fix the tile being uneven, I was able to follow along your video step by step and knock out a project I had zero previous experience with. Thank you so much.
Whenever I install a new toilet I tend to caulk around the whole toilet leaving about a 1" gap at the back, Best of both worlds imo it looks great and you cant notice the lil bit that is missing at the back aswell as if a leak occurs most of the times it will be able to still be noticed. I am not a professional plumber by any means tho!
This is a great approach. Thanks for watching!
à
😊😊
You did an excellent job with this. The up-close camera work is spectacular. I only wish that we could have that excellent view during installations! This is sure to help a lot of people. I'm not sure if you mentioned it when you ended up caulking yours to the floor.... but my tip is "all of the above." Caulk the front portion, and leave the back open. That way you prevent the external leak problem seeping under, you add some stability and aesthetics. But the back is open to show any leak from the toilet gasket.
I've seen these new rubber gaskets, but haven't yet been brave enough to try one. Yes, the wax is a bugger to clean up! But that's because it sticks so darn well. I like knowing that the thick ring (with insert for sure!) has made full contact, and then you squish it down. With the rubber, I'd be worried that I'm not getting enough compression, or seal all the way around evenly. I've never had a quality wax ring go bad, and I've never had to re-do any that I've installed.... so I don't much care what happens *next*. :-)
Thank you so much for this video. After I was quoted $250 for replacing my toilet ( just replacing the toilet) I decide to do it my self, so far so good.
Praise the cleaner in this house. That's the cleanest toilet replacement ever. 😁
This was exactly what I was looking for! I’m fixing up my much neglected family cottage after my brother passed away and this was so easy to follow. I can’t thank you enough!
So glad it was helpful!
Great video! Here are some things to consider. I do caulk because my Florida house is built on a concrete slab, no wood under toilet to rot if there is a leak. If house is wood frame be sure to not caulk the back of toilet. I never used silicone because once it’s there it’s almost impossible to completely remove, especially on a porous wood floor. If the next toilet has a different footprint, well good luck. I use Dap Kwik Seal Plus clear. It is water clean up and completely waterproof. If gap is very uneven or toilet was shimmed then I would use white or biscuit to match toilet color. A bigger concern than overflow toilet water getting under toilet is it getting under the walls around toilet. Always caulk where the baseboard meets the floor and up the corner gaps a couple inches. White acrylic latex with silicone works great. My neighbor had a slow leak in the water line to the refrigerator ice maker and it went under the wall and cabinets causing $40,000 damage.
Thank you very much for a clear and very informative video on how to. I feel confident that I now will be able to install my toilet bowl successfully following your step-by-step video. Keep making more as you are good at explaining things in layman's terms.
As per usual, you have a wonderfully produced and easy-to-understand video that de-mystifies the process of whatever you're sharing. If I may, only one item of concern and its the gasket you used in lieu of the the wax ring. Those things can have all kinds of problems, similar to the wax rings with the built-in funnels. The problem is its flexibility, and I've seen this play out time & again on toilet installs. Each time you sit on the toilet, unless you are sitting down absolutely square on the toilet, you sit down at an angle and that pushes ever so slightly backwards on the toilet. Now at first, the closet bolts are tight and its not an issue. But over time with hundreds sit-downs, what ends up happening is the toilet pushes backwards on that gasket and the flange, because it is pliable, buckles inward and partially blocks the drain, and that starts causing backups. Basically all that flexing you showed in the video of the silicone gasket is the enemy. Even though wax rings are messy, they're still the gold standard and I only install basic wax rings on toilets. There's a reason why Kohler gives you a basic one. But, time will tell. Hope it works for you with no problems. Thanks for the time you spent in making this.
Excellent feedback, thank you very much! This is the first concerning thing I’ve heard about the flexible gaskets. Will keep my eye on it for sure. Thank you!
Hey Bullmoose - since reading your comment I've gone down a google rabbit hole trying to find more information about the failure modes of waxless seals... and I can't find anything about them failing in the manner you describe. By all accounts they are pretty robust, and offer lots of advantages over the traditional wax ring - including that they can flex a bit with slight shifts in toilet positioning without losing the seal.
I'm not questioning your comment, but I'd really love it if you could point me to where I can read more about a waxless seal flexing under a shifting toilet to the point that it causes a blockage. Thanks!
@@AmplifyDIY sorry for the delay in responding. Didn’t mean to send you down a rabbit hole. In terms of what kind of documentation can you find, you won’t find the plumbing forums blowing up with this problem, nor is Fluidmaster going to mention this in their literature because this is really a field issue, not a design flaw in their product. My comments above were based upon seeing numerous issues with the wax rings with the integrated funnels. What ends up getting people’s attention is that they start seeing a little water seeping out of the toilet at the floor, not full stoppages. Pull the toilet and sure enough, the wax ring has shifted and you see the funnel slightly deformed against the inside of the closet flange just enough to where when the toilet is flushed, the water is partially diverted from the center of the waste line and leaks onto the floor. (Another reason not to caulk). I want to be clear that you may have absolutely no problem with your seal for the life of the toilet. Entirely possible. I’m just saying I’ve seen this very common problem with a similar design on the integrated wax rings, and given that your gasket is silicone, it’s even less rigid than the plastic insert on the integrated wax ring. Search some RUclips plumbers and you won’t see many of them using anything other than the good old wax ring. Probably far more info than you cared to read today! Haha. Thanks again and keep up the great videos.
Excellent! Best DIY toilet installation I have seen- great detail... Thanks a bunch!
Glad it was helpful!
Step by step instructions.! Muy bien. Thanks sr. Im 62 years old and im gone to do by myself
GREAT VIDEO!!!!
Loved the step by step instructions, very easy to follow.
And the bloopers at the end.....priceless!!
Thank you!
Thank you so much! I'm really glad you found it helpful. :)
I am SO happy I found your channel. Yours is one of the best DIY I have seen. Thank-You!
Thank you, Charlotte!
Pretty simple instructions that everybody can understand. Very straight forward not so technical. Good job
Thank you, Mary!
This was excellent. Thank you. Just saved me about $400 on the 2 toilets I'm replacing myself.
That's awesome, jelly! I'm really glad to hear it saved you some cash. Thanks for watching!
Best DIY know how video. And the Vice Grip Garage hat and T-Shirt adds to the honesty of the advice !
A guy went ahead and did the right thing!
This is a superb video. Clear, detailed, thorough, and perfect for the beginner. Thank you so much!
Glad it was helpful!
Subscribed after watching this. I am the least handy person ever and I watched this and was able to do it. Even though it’s simple for some- this was a big deal for me to do. I’m proud and I owe you one 😊. Great breakdown and looking forward to more of your videos.
Glad it helped!
Thanks. As to caulk, yes do seal toilet to floor , but also leave a few inches at back to be a "tell tale" gap if toilet develops a leak.
Just replaced my toilet following this guide and so far no leaks! thanks for the help!
Got quoted a pretty big amount to replace the toilet. Looked at a few videos like this one and I'm much more confident that I can do this!
You can do it! Good luck. :)
Great instructional video! Very thorough and covers most of the issues an installer would deal with.
Thanks! 👍
Great job. You have covered every details. Thank you.
excellent video. really appreciated the suggestion of the "better than wax" silicone ring.
ive never done this by myself am not a plumber but really have no choice as im the homeowner, thx for this video, really needed these extra details, i hope to tackle this in next week or so
Good luck!
Thank you so much you've made a fan for life, the bloopers at the end were perfect
Glad you enjoyed it!
This was a great tutorial on how to do this. I had to replace three toilets in my home, and the first couple, I would stop and start again the whole time. Because he was so good at explaining every aspect, by the time I got to the third one, I was able to do it quickly and efficiently.
Nice job, Chief!
When I bought my house the first 2 years I couldn’t figure out why my half bath always smelled like sewer and I kept thinking it was coming from the toilet. I finally realized that there was no cocking around my toilet and once I sealed it, the odor was forever gone! Thank you so much for this amazing video. I am a 57 yr old female, have hated my toilets for 10 yrs and because I’m handy I never wanted to hire anyone who will likely charge me too much so now I have complete confidence after watching you that this is going to be a breeze! 😊
Thank you! Straight to the point and excellent step by step instructions!! I enjoyed that and learned a great deal
Wow! This was one of the best, most thorough videos that shows every step. I, personally, am still struggling with the problem of leaks from the tank bolts. Mine are not like those you showed. They come with rubber and metal washers and a double set of nuts for each bolt. I have tightened several times but still am seeing drips from the tank bolts... 😕. Can you suggest what I might be doing wrong? I am turning water on very slowly so I don't end up with too much leakage to clean up. Thanks for your video.
I'm glad you like the video. Are the rubber washers new? Are you certain you've assembled everything in the correct order?
Very well explained. Your are number 1 generous man sharing your knowledge. Good on you.
What a simple, clear and professional presentation! Loved it. Now I feel confident to replace my old toilet. Thank you.
Thank you for the feedback, and good luck!
OMG, So thorough on this project. I will be watching this on my laptop as i do mine. Thank You.
Hope you enjoy it!
I like the metal bolts you showed. My plumber used a pair of $2 plastic ones. One of them snapped off, so now it needs to be fixed.
The plumber that came today wanted to charge $495 CAD to lift and reset the toilet. That’s insane, which is why I’m going to try doing this myself.
Great video!
The plumber that came to my house today wanted $680 CAD to do the same. I kindly asked them to leave. Also why I'm here. Great Video.
You are about to save me $600 (plumber quote) I need to replace my fill vale but some previous genius homeowner cemented to the toilet! So now I need to replace the entire toilet. smh Thank you so much for this. I have a bit more confidence now.
I'm glad I can help! Hopefully you've already finished the job. If not, I'm happy to try to answer any questions that may come up. Good luck!
Very well explained. I am gonna try to use this to replace mine
You can do it! Good luck!
Great video, very well paced and clearly explained. I caulk but at the back of the toilet leave a small 1/2 inch or less uncaulk area as an early point of notify me of a leak at the base.
Great tip about leaving the gap, Yardmansurfer! Thanks for watching. :)
I watched your video on installing toilet seat. Please keep up the great job of helping self doers like myself. Thanks much.
You're welcome!
A true professional makes Tricky And messy jobs looks very easy... Great job sir! I wish you could have been mine K. through 9th Grade teacher, More specifically, my Shop Teacher!
I’ve heard that caulking the front and sides of the toilet but leaving the back uncaulked is the best of both worlds.
Thank you this was very helpful and a good reminder. I also agree 👍🏼to seal the toilet to the floor.
No yapping no music.just a great vidio
Probably the best well done video I've seen on these
Thank you!
Thank you 🙏🏻 for that important information. You’re a really instructor. I have learned a lot from you.
God bless you 🙏🏻
Glad it was helpful!
Excellent video. Thank you. I'll be changing our basement toilet soon.
Thank you! Best of luck!
The way you explain everything, I believe I could exchange my toilet.....Not a lot of none sense talking ...Thanks for sharing 😊
Thank you Cecilia - you can do it!
Now that's a great video for replacing a toilet, Thanks so much
Glad it was helpful!
Wow! You're a great demonstrator. Thanks for sharing your expertise. 👍
Thanks for watching!
One of the best video and lots of details information. Thanks for educating to replace toilet commode.
Great video. You’re a great teacher!
I appreciate that!
You are an amazing and extraordinary DIY instructor. You make it very simple to DIY beginner like me!!!!?
Wow, thank you!
The best how to do video ive seen on youtube great job man!
Glad you liked it!
I am seeing this video 2 years after it was posted. This is an excellent video. but one thing that I have learned to help with placing the toilet on the studs on the flange is to put blue painters tape on the floor inline where the studs are. This allows you to line up the holes on the toilet with the studs much easier since sometime the studs and holes are hard to see looking down over the toilet.
Great tip - thank you!
this guide was VERY VERY VERY helpful!!! Installed a new toilet in my house today. And the recommendation of the non-wax seal was a great call. And this was my 1st time replacing and installing a toilet. Thank you for this video.
Glad it helped!
A feller just got home in the going to town rig after picking up a new commode, and I figured I’d go ahead and do the right thing and watch a how-to vidya first, and I landed here. This is very helpful and I appreciate you making the video. I feel ready to tackle this project after a cold snack or two. Hopefully I won’t make the bolts waaaay over tight…it’s fine.
Don't forget to stop to wet the back-neck from time to time during the job!
I just replaced two toilets this week. On one the mounting flange was broken and required replacing. This was the easier one. The other one,the one that I expected to be simple turned out to be a real pain. The plumber that installed it had the flange 1/2 inch too high and it was held on by just the glue,no screws into the concrete. I had to take the new toilet back off and cut the flange off and put a low profile flange on,and properly drill and screw it secure. No more wax rings!
First... Love the VGG cap
Second... Thank you for the video tutorial, going to change out the toilet in a building we are renovating for our second storefront location.
Good question: can you safely add some food coloring to the tank to see where a leak might be coming from, before removing the whole commode / tank?
Agree. Best to seal. Thanks for the tutorial. You are a great teacher.
Thank you!
Great video,very informative and easy to follow instructions. Thank you very much sir!,😊
Excellent video.
Also, I didn't know that the heavy plunging of the toilet bowl could cause leaking from underneath it because of an inadequate seal. That is a problem that I have every now and again with the toilet that I have.
I was wondering why this problem only seems to occur when I use the plunger and sometimes for a few days afterwards.
Probably time to replace the seal under your toilet. Good luck!
Nice job ! I will caulk on a slab but not on wood subfloor. Your presentation was clear and understandable with good tips .
Thanks 👍
OK this was SO good. I have 2 toilets to install.
just curious... how did it go?
Best tutorial I have ever watched. Great! Very informative.
Thank you!
Great video, excellent job of explaining the different steps. I will be changing out a toilet in the next few days and this video will help me.
I'm really glad you found it helpful. Good luck with your toilet!
Great video. Im replacing an old one and it measures 11 1/4" off the wall. Would I need a 10" offset or 12"?
Great video. I think I'll try to tackle this myself. Personally, preventing early leak detection to protect my subfloor seems like a big deal, so I'd probably opt not to seal it until I was selling the house and the home inspector required it.
You can do it!
thanks brother...used this vid on two toilet instals!!
Nice work!
Excellent video. Very clear step by step instructions and options for our specific situations. Thank you!!!
As a certified master toilet technician [plumber] I suggest using a wet vac to get the water out of the old tank and bowl. Also, toss a bucket of water down the bowl after flushing to siphon more of the bowl water down the drain.
Great tips, thanks!
thank you. learned something and cant wait to apply what I learned in the next few days
thanks, great video - except for one thing.
Do NOT use caulk to fix a wobbly toilet. If it moves, it will leak. Fix the wobble first (shim or grout) then caulk it.
Great tip - thank you!
@@AmplifyDIY Full disclosure, I learned it from a plumber - I didn't figure that on my own! Nearly all of my good tips are borrowed from experienced people like you!
I wish RUclips existed when I bought my first house 30 years ago. it was 100 years old and I tried to learn from TV shows and videotapes - and they make it look so easy!
i got the better than wax silicone ring. it works ok, i think but the commode rocks slightly. without the ring it is rock solid, so i may see how it goes. also the bolts to the flange kept popping as i tightened them. was a real bear. maybe it was because the old flange still had a little wax in it from the old seal and they were slipping.
it was a great video . could you explain if the toilet does not flush and clean 100%,what are the reasons and how to correct the situation . thanks, could it be vacuum problem?
Thanks, young man that was very perfect ruction for replacing the toilet. I got it. Thanks again.
I’m so glad it was helpful. Thanks!
This helped me exstreamly well I didn’t no what I was doing sooo thanks Sooo much for making this video
Glad I could help!
Regarding the caulking, I've not done the install yet so I haven't tried it myself, but I've been advised that instead of dragging the tube along the gap, tip trailing and leaving a tube shaped line of caulking material, to Push the tube, leading with the tip as you squeeze the material out, The tip itself the extruded material into the gap as the tip moves forward and over it. This appears to have the same effect as going over the bead with a finger to force it in. It seems like it ensures fewer gaps due to uneven squeezing or air bubbles and removes the step of forcing it in with a finger or sponge afterwar and it looks tidier.
This is one of the best examples of "I've heard it both ways." - I'm sure either technique is fine. Experiment to see what you are most comfortable doing - and good luck!
Nice job. Great voice and instructions
Fantastic quality keep it coming!
Hello. Great video.
We bought a house that has two short toilets, 15 inch from the floor, Crane brand. What would you recommend to replace them with and also the brand of toilet?
Excellent video, detailed yet simple description. Thanks a lot!