Hey Cole, awesome use of 3D printing to further and enhance our hobby! The trailer turned out amazing! Did you use PLA for the trailer? What is your next 3D printing project for your RC’s?
Thanks! I was super happy with how it came out! Yep it’s printed in pla, I haven’t messed around with the other filaments much yet. I’m working on designing a flatbed trailer for 24th scales and eventually I would like to do a flat bed for 10th scales as well. And I’m sure there will be some other random little parts I print along the way! Always appreciate your support Aaron!
I have 2 available right now! www.ebay.com/itm/176090797123?hash=item28ffd45443:g:7n4AAOSwMWlkMhcT&amdata=enc%3AAQAIAAAA8PUC0053%2F%2B257U1fkcP75JwzlsEyDLpUNf19BObMPBoDscB1819Nlnmg419sIrkJ3jbSCKT6wJvws4rzX%2FiGowgIqkFNl1nuONK9LVUtGqe2BtH4DwQT1dmK3oL5PcGycY3DYobIuMoTLeIW0RVNKzaj4wuDZ3t1PlXoBX2zMocYw2%2BQBdtXWyl6H4iVhSQWr6SUAEgESXBjqNIgv9FhweofOnB3x2NiNVhAAoNbgc4KIm%2FRBDQ%2BXSKQZ6VioIqaWEC6l8Js4hr38mtbrMUBRnZvPHv6JYtpk78ukEm2zMneCoxiaozX7rIBOdsaSsue%2FA%3D%3D%7Ctkp%3ABk9SR_jaxpWsYw
Would it be possible to change the turnbuckle connector to a normal hitch style? Or even a ring? I have an axial scx10 ii with an upgraded steel bumper on the back with a hitch that kinda looks like a normal hitch.
I could probably do either. For the normal hitch style, I could just do sort of a cavity in the bottom side of the front most portion of the trailer. It wouldn’t look quite like a real trailer hitching system, but it should get the job done at. The ring would be a bit more challenging and I’m not sure it would be very durable.
I just found this awesome job! I had a buddy print this out and saw your forum about selling the hardware kits do you still have those available by chance?
@@PritpalSingh36Thanks for the idea! I’ll see if I get around to it, I still have a ton of other videos to edit at the moment. Appreciate the support man!
Maybe a slight bit of flexing, but really not noticeable when towing. For being multiple 3d printed pieces screwed together it’s about as good as it will get. Thanks for watching!
Unfortunately I had some download my files, which were licensed as NONCOMMERCIAL, and start selling them on eBay. So the files are not currently available. I wanted to make it easy for anyone wanting a trailer and thought I could trust people, but one individual had to ruin it for everyone. I'm I am currently working out a solution. They will most likely end up being behind a paywall, which I hate to do, but I worked too hard just for someone to go rip me off. I'll either make a video, community post, or leave another reply when I figure out a solution. Sorry.
I don't currently have the files posted anywhere online, but would definitely like to work something out for you. To start what country are you in and would you be interested in international shipping? I have a couple different ideas.
@@elliottgriffiths-v4t 👍I just created a Printables page last weekend. So I will try and get the files for the trailer uploaded soon. I may eventually transition my eBay store to Esty and offer files for sale but for now since I don't want to go through the process of setting up another account they will be available for free on Printables!! I just ask that you share my page around and maybe even follow it. I'll try to have the trailer files posted by tomorrow evening. www.printables.com/@3DudesRC_1483856
@@The_Official_Peanut2010 Printed on Ender 3 v2 Neo. I currently do not have the files posted anywhere. I’ve considered listing them on them on Cults 3D for maybe $20-$30 since it did take me a lot of hours and prototyping on my end.
@@hardsweatyworker Alright, I’m currently out of town, but when I get back I will print the remaining parts for one and will send you the link to the listing. Should be a little less than 2 weeks. Thanks for watching!
Great job! I may want one of these this summer if you make more.
Thank you! Alright, I will keep you posted!
Hey Cole, awesome use of 3D printing to further and enhance our hobby! The trailer turned out amazing! Did you use PLA for the trailer? What is your next 3D printing project for your RC’s?
Thanks! I was super happy with how it came out! Yep it’s printed in pla, I haven’t messed around with the other filaments much yet. I’m working on designing a flatbed trailer for 24th scales and eventually I would like to do a flat bed for 10th scales as well. And I’m sure there will be some other random little parts I print along the way! Always appreciate your support Aaron!
I would be interesting in buying one when you have another ready!
I have 2 available right now! www.ebay.com/itm/176090797123?hash=item28ffd45443:g:7n4AAOSwMWlkMhcT&amdata=enc%3AAQAIAAAA8PUC0053%2F%2B257U1fkcP75JwzlsEyDLpUNf19BObMPBoDscB1819Nlnmg419sIrkJ3jbSCKT6wJvws4rzX%2FiGowgIqkFNl1nuONK9LVUtGqe2BtH4DwQT1dmK3oL5PcGycY3DYobIuMoTLeIW0RVNKzaj4wuDZ3t1PlXoBX2zMocYw2%2BQBdtXWyl6H4iVhSQWr6SUAEgESXBjqNIgv9FhweofOnB3x2NiNVhAAoNbgc4KIm%2FRBDQ%2BXSKQZ6VioIqaWEC6l8Js4hr38mtbrMUBRnZvPHv6JYtpk78ukEm2zMneCoxiaozX7rIBOdsaSsue%2FA%3D%3D%7Ctkp%3ABk9SR_jaxpWsYw
Reach out if you any questions!
@@3DudesRC just ordered one! Thank you so much!
@@codygustavson395 Thank you! I’ll get it shipped out tomorrow morning!
Did you use supports for the front rest piece
@@Traxxasanddroneguy I did not.
do you have building instrucions i am printing mine
Yes, there should be a pdf on the maker world page. Let me know if you can’t find it.
Would it be possible to change the turnbuckle connector to a normal hitch style? Or even a ring? I have an axial scx10 ii with an upgraded steel bumper on the back with a hitch that kinda looks like a normal hitch.
I could probably do either. For the normal hitch style, I could just do sort of a cavity in the bottom side of the front most portion of the trailer. It wouldn’t look quite like a real trailer hitching system, but it should get the job done at. The ring would be a bit more challenging and I’m not sure it would be very durable.
I just found this awesome job! I had a buddy print this out and saw your forum about selling the hardware kits do you still have those available by chance?
Thanks! Yes, I can get one listed for you. Do you need tires as well? Or just the axles, tie rod for the hitch, bolts, and nuts?
@@3DudesRC everything but the tires please
@@juddwieser420 I replied with the link to purchase on Makerworld. Let me know how it turns out!
@@3DudesRC Will do man thanks again!
do you have the files to print this the printables ad is not valid
Bro your Rc car Is Sooo Nice
Thank you!
@@3DudesRChello bro please make a video with your rc cars pulling a trolley fill with things or soil please
I have watched your every video ❤😊
@@PritpalSingh36Thanks for the idea! I’ll see if I get around to it, I still have a ton of other videos to edit at the moment. Appreciate the support man!
where can i get the drop hitch you used
Just added the file on maker world, same page as the files for the trailer.
How dose it tow is it sturdy enough any flex in the trailer
Maybe a slight bit of flexing, but really not noticeable when towing. For being multiple 3d printed pieces screwed together it’s about as good as it will get. Thanks for watching!
Do you think you could link the wheels? i'm trying to print this for my rustler and was wondering which wheels you used?
www.amazon.com/dp/B01GGQCP0O?ref=nb_sb_ss_w_as-reorder-mobile_k0_1_14&=&crid=NAS1P7644WE2&=&sprefix=rc+1%2F10+wheels
Thanks!!
@@jackhardy1536 no problem! Good luck with your build!
how did you install the hitch onto tour truck
@@Traxxasanddroneguy Slide into hitch receiver and screw in through the bottom.
Would you be willing to share the STL? I'd like to make one for my buddies kid. They live in Florida, so I don't have the dimensions.
www.printables.com/model/663252-rc-boat-trailer-for-traxxas-blast
Hope it prints well for ya. Let me know if you find anything that could be improved!
@@3DudesRCThanks so much! I was searching for it yesterday but Printables didn't show up in my options!
@@bpkeen no problem!
the 3d file isnt working?
do you have a different one?
Unfortunately I had some download my files, which were licensed as NONCOMMERCIAL, and start selling them on eBay. So the files are not currently available. I wanted to make it easy for anyone wanting a trailer and thought I could trust people, but one individual had to ruin it for everyone. I'm I am currently working out a solution. They will most likely end up being behind a paywall, which I hate to do, but I worked too hard just for someone to go rip me off. I'll either make a video, community post, or leave another reply when I figure out a solution. Sorry.
Hi I’d love to buy one off you, although I’m from a different country. I was wondering if I could buy the files of you to print it myself?
I don't currently have the files posted anywhere online, but would definitely like to work something out for you. To start what country are you in and would you be interested in international shipping? I have a couple different ideas.
@@3DudesRC I’m from the uk (England specifically)
@@3DudesRC I’m not so keen on international shipping as I’m not trying to spend loads of money on it
@@elliottgriffiths-v4t 👍I just created a Printables page last weekend. So I will try and get the files for the trailer uploaded soon. I may eventually transition my eBay store to Esty and offer files for sale but for now since I don't want to go through the process of setting up another account they will be available for free on Printables!! I just ask that you share my page around and maybe even follow it. I'll try to have the trailer files posted by tomorrow evening. www.printables.com/@3DudesRC_1483856
Update: the files are now posted!
how long did all the parts take toprint
30 hours and 20 minutes total!
What printer? And can you please send the file
Or is it on thingi verse
@@The_Official_Peanut2010 Printed on Ender 3 v2 Neo. I currently do not have the files posted anywhere. I’ve considered listing them on them on Cults 3D for maybe $20-$30 since it did take me a lot of hours and prototyping on my end.
@@3DudesRC I’d buy one for $30
How much is love to buy one haha
I’ve been selling them for $115. I’ll give you $10 off for watching the video if you’re still interested in buying one?
Awesome yesss I’m actually waiting on my blast I ordered a few weeks ago but seriously interested
@@hardsweatyworker Alright, I’m currently out of town, but when I get back I will print the remaining parts for one and will send you the link to the listing. Should be a little less than 2 weeks. Thanks for watching!
Great build. Interested in purchasing a trailer from you as well. Can you please send a link when available. Thnx
@@turboTim750 Thanks! I will get you the link when the next one is available.
Could you send me the print model
www.printables.com/model/663252-rc-boat-trailer-for-traxxas-blast
Where are the 3d files lol
makerworld.com/en/models/545788