Brightest Turn Signal Switchback LED - JDMastar 3030
HTML-код
- Опубликовано: 7 сен 2024
- 2013 - 2015 Honda Accord Coupe: (3157 CK)
Product Link: amzn.to/2nzHYsL
www.jdmastar.co...
Sedan( 2013 - 2015 Accord) : (1157)
Product Link: amzn.to/2S9MQUb or goo.gl/9u9ud1
www.jdmastar.co...
2016-2017 Honda Accord Sedan/Coupe: (7443)
Product Link: amzn.to/2mg9gnO
Product Link: eBay: goo.gl/mrl7he
www.jdmastar.co...
This JDMAstar led is 3157 Standard and CK type. Very bright Pure White LED. Amber lights is brighter than stock bulb. Good buy. I've installed it on my 2013 Honda Accord Coupe. This will work for all 2013 2014 2015 Accord Coupe and Sedan. Coupe uses 3157 and Sedan uses 1157 bulb for 2013 - 2015 Accord. 2016 2017 Accord for both coupe and sedan uses 7443 bulb.
You also need to install resistors for fix hyperblinking issue. Flasher relay is not accessible on the 9thgenaccord.
I can be reached via:
Facebook: / diycarmodz
Instagram: / diycarmodz
Google+: plus.google.co...
Email: diycarmodify@gmail.com
Mailing Address:
DIYCarModz
9051 Mira Mesa Blvd
#262321
San Diego, CA 92196
JDM ASTAR Extremely Bright 3030 Chipsets White/Yellow 3157 3155 3457 4157 Switchback LED Bulbs with Projector For Turn Signal Lights
Here is the list of LED bulbs that I use or recommend trying for 2013 - 2017 Honda Accord.
-3157 Switchback LED: (2013 - 2015 coupe) amzn.to/2mbMKs1
-7443 Switchback LED: (2016 - 2017 Sedan and Coupe) amzn.to/2mR9u42
-1157 Switchback LED: (2013 - 2015 Sedan) amzn.to/2mbz7sO
-921 Reverse LED: (2013 - 2017 Coupe and Sedan) amzn.to/2msLmlQ
-194 Rear RED sidemarker LED: (2013 - 2015 coupe) amzn.to/2mbNVrk
-7440 7443 Brake LED: (2013 - 2017 Coupe and Sedan) amzn.to/2mTvM5h
-194 Interior LED; Map+Dome+trunk+door(v6) (2013 - 2017 Coupe and Sedan) amzn.to/2no4hgN
-Interior Sun Visor LED: (2013 - 2017 Coupe and Sedan) amzn.to/2no7Rri
-License Plate: (2013 - 2017 Sedan Only) amzn.to/2mbQJoD
-7440 Rear Amber Turn signal: (2013 - 2017 Coupe and Sedan) amzn.to/2mbJqNv
-H11 Low Beam Headlight: amzn.to/2nnNHxI or amzn.to/2mbyXli
-H8 AKA H11 (same fitment bulb) Foglight: amzn.to/2mbSTnU or color lens cover changeable LED: amzn.to/2mbNYU7
-9005 DRL/Highbeam (the base of the led bulb has to be adjustable in order to had the led diode face the correct orientation): amzn.to/2mbNo8N or amzn.to/2nnXF1U
Low Beam (HID 35W Ballast): amzn.to/2mMJKW4 or eBay: goo.gl/7sl3OF
Low Beam (HID 55W Ballast): amzn.to/2mciUTh
Low beam (HID Bulb H11B 5500K) : eBay: goo.gl/cqq51S or www.theretrofi...
LED Ballast and Bulb Kit: goo.gl/zSTfTy
Rear Bumper LED Reflectors: (2016 - 2017 Sedan Only) goo.gl/291KII
Rear Bumper LED reflectors: (2013 - 2015 Sedan Only) goo.gl/nxHCIj
Rear Bumper LED reflector: (2016 - 2017 Coupe Only) goo.gl/pXqLs1
Hey Jeff my name is Chris I just installed the Switchback you are correct they're pretty bright they are actually awesome thanks for the great review
Damn your headlight setup is bright to the max!!
Hi guys so I installed in my 2017 civic sedan and I have hyper flashing. BUT I like it, can hyper flashing hurt my car? electronically or anything if not, I love for it looks...
Thank you for such great product reviews it's truly a big help
This was a great video! I want to order these but it looks like the turn signal assembly won’t allow for a resistor. I really don’t want the hyper flash but as long as it works I guess it’s okay
I have a 2017 accord sport special edition and I wish I had push to start 😢
Wow, I expected to be greeted by a screaming Indian guy.
That hyper energetic whitewashed Indian who reacts like hes just installed a new turbo or something.
Sage Wysocki kleantrix 😂
Just installed the resistors that I bought from you and so far it's workin great. Thanks! Now about these switchbacks, is there any delay between switching from white to amber?
Yes, there is a delay.
I originally dont have DRL. I used leds that came with resistors. I dont have hyper flash, i have problem that while my parking lights are on (white led), when i turn on turn light it has a delay. Like normal turn light blinks twice while these led blinks only once. And it has a small delay while switching to orange/amber. It goes a bit white then amber.
How can I fix it?
Thanks
I replaced 3157 incandescent bulbs on my Dodge truck and got a rapid flash turn signal.
What RESISTOR?, where do I find one?
Do I need one for each the Driver side and Passenger side separately?
How do they install? (Plug n play or soldered in-line?)
I replaced the Backup/reverse Lights with bulbs similar in shape & size to this video and they work & perform great. No problems. Only problem is the rapid flash.
Please help. I'm new to the LED world & would like to replace ALL Lights to LED eventually. Thanks in advance!!
Thanks so much for all of your videos! They're so educational and helpful. I posted a comment on your car detailing/cleaning video, but not sure if you responded.
My question was: How do you spot clean? Meaning, if there's bird poop, tree sap or a spot of dirt on a particular area or panel of your car, how do you clean that area without scratching the paint?
+Jeremy Thomas I use either last touch or rinseless car wash solution to wipe the dust off my vehicle. I do not use the California duster. You can buy a small hand held garden sprayer bottle and use that to wash off bird droppings by setting the pressure setting to high and then once the bird dropping as sprayed away, use any of the solution above to wipe off the vehicle.
+DIY: Car Modz Okay. Thanks so much! Also, do you need to wax and clay a brand new car before using the rinseless method to wash the exterior? Planning on buying a 2016 civic in June, and was wondering about this. Thanks so much in advance! ☺️
+Jeremy Thomas Yes, you should clay your vehicle first. It will make washing and waxing much easier. The new car just sits at the dealership and the paint filled with contaminants.
+DIY: Car Modz I appreciate the quick response. Okay, so clay, wax, then apply sealant in that order, before using the rinseless method, correct? Thank you so much, again. You're a huge help to the community!
+Jeremy Thomas wash first then clay then seal and final wax
Do you have a video on how to install the resistors. I want to do this to my vehicle but I have no experience with resistors.
I have a 2016 Honda accord sport sedan and these have a lot of "wiggle" room in the plug. In addition to that, the contacts on the bulb did not touch the contacts in the plug. To get around this I pulled the bulb's contacts out a bit so that when I pressed the bulb into the plug they were forcefully touching. This was fine, but then the issue of the wiggle was still present and if the bulb was not centered in the socket, it would not light at all. Maybe I got a pair of lemons
Which connector base did you buy?
2016 accord Sport uses 7443 base bulbs..
Thanks for the reply. It looks like I made a mistake. I thought that the 31xx bulb size was one of many names for the T20 socket. It's not. It doesn't look like the Amazon store carries 7443 in that switchback model so I'll get them from the actual web store. Just wanted to let you know that the link you provided in the '16-'17 section in the description leads to the 31xx size. Maybe they was supposed to be a drop down but the only size listed on that link is 31xx.
For some reason, they are not selling the 7443 on Amazon any more. It is not listed there. They must have combined the listing for both 3157 and 7443 into one. I've corrected the link but I recommend purchasing directly from JDMastar.
I wish i could put switchbacks in my 12 Civic. Unfortunately the stock headlight housing has an amber filter on the turn signal
For the headlights what's better HID or LED? Because I keep having problems with my HID after a while one of the bulbs starts lighting up a different color
For a 2014 Chevy Cruze... Im trying to figure out the front and rear turn signal wiring.. Which is the ground.. And the blinker wire? Front is blinker wires are brown and violet? Anybody know?
Do you know if there is a switch back led light available to change a taillight that has a combination red turn and brake light red to turn am ber when the turn signal on?
Yes, red amber switchback does exist. However unless your taillight lens is clear or has both amber and red lens cover, both amber and red will not show up clearly without color distortion
I bought from them and there's is much better I got mine straight from there website.
I just put some switchbacks in my 2017 Accord. Do you ever worry that they may be too bright and its blinding other drivers. Havent been flashed yet but these things along with my LED lowbeams are so freaking bright I must be blinding people.
Haven't been flashed once. Didn't get pulled over once. No one ever complained. If anything bright is good because I would like people to be able to see the turn signal amber lights during a sunny day.
Take off your LED lowbeams; those are almost always too bright. If you think these may be too bright, your actual LED headlights most certainly are.
would these work on my 2017 honda civic sedan? thanks jeff
I ordered mine on the link above, but somehow I received round tips LED instead of flat tips like the one that you have...
contact the seller. I have listed 2 different types above.. one for the sedan (round 2013-2016) and coupe (flat 2013-2015)
the drl function looks like it would blind oncoming traffic
Which one is the brightest between the exLED and this one?
Are you sure you have the correct bulb for the switchbacks on 2016 accord sedan? It's the flat end versus the round ones. I'm getting mixed answers as to which one it is. PLEASE help anyone.
The part I have listed in the video description is correct. 2016 Sedan uses 7443 for the front turn signal bulbs. whoever told you that they are 1157 are wrong and I would not listen to their advise anymore.
Dear , i have 2015 honda accord V6 3.5L
The headlight is led projector white color for the low beam but the high beam light is yellow halogen if I want to change it to white color which one do you recommend ??
+gladyboy search amazon or eBay for 9005 led. Buy the one that comes with driver box. www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Daps&field-keywords=9005+led
+DIY: Car Modz ok thank you , I have another question
Which is the best and good price of brake pads and rotors?? For the 2015 honda accord V6 3.5L sport
gladyboy It depends on how you drive. Do you race? go to tracks? mountain run? Drive fast or aggressive? If you track your car then I would look into either EBC RED or Hawk pads with drill/slotted rotors or even just Centric premium blank rotors. If you drive normal, I would purchase the Centric pad and rotor.
+DIY: Car Modz I drive aggressive most of the time , can you help me with a link of EBC or hawk? If you don't mind
Thank you in advance dude
+gladyboy got my hawk pads on amazon cheap
Hello I have 2007 Dodge Magnum SXT, but the white part of the bulb is still ON. It does not turn off when I switch the turn signal ON. The amber part is poorly visible, because at the same time it is overwhelmed by the white one. How to solve, please? Thanks for replies.
Can you link me the bulb you purchased. Not all switchback leds are made the same.
so the car has this option from factory built in the light-base but they sell the cars with normal bulbs??? thats WEIRD.
dumb question will these bulbs work behind a all amber plastic lens, light on a fj cuiser. I took a very bright led flashlight and forced the light through the housing and it was pretty close to white coming out the other side
More than likely its not going to look 100% white. It will have that slight pale yellow light but there will be a difference between the turn signal ( complete amber color blinking ) and the parking lights (whitish color)
Hey so I installed these on my 2016 sedan exl, along with the resistor you make and some rear leds. However in the front there's a slight delay, about a good one second where the bulb changes from white to amber or vice versa. Is that normal? Nothing was loose and everything fit perfectly.
That is how it suppose to be. There is always a delay when switching between colors. Look at Audi, it is the same thing. Nothing to worry about. Working as it should.
DIY: Car Modz o ok kool awesome.
Any switchback LEDs for 6000k bulbs you would recommend?
Do you know of any other brand that has a good reputation that aren’t as bright as these? I constantly get flashed at with the JDM ones. Any help would be great!
That's a lie I have these and no one ever flashes me. You probably have either fogged up headlight housings which bounce light in every single direction whether they are projectors or reflective housings or you have leds or hids in a reflective housing or you drive with your high beams on at night. I've had these for two years and never have been flashed and I even have led bulbs in my low beams in this exact same car.
Can you provide the link for the plug and plug resistor? Also do you have an installation video of it?
+SAL ill have a short pnp led resistor harness version 4 installation videos up today. Installation is the same as my previous version: ruclips.net/video/5soDMRmu9Mk/видео.html
So switchback bulbs should be designed within the bulb itself to switch between the colors correct? Or is there a special relay that is needed? I had purchase some other switchback bulbs, but the white light doesn't switch off when the turn signal is on. The white light stays on at the same time that the amber lights flash. Why is that?
I have the same problem, Rob. Did you solve it and you help me? :)
heimat I found that the issue was the bulbs themselves, they weren’t the ones that are in this video. I bought some others and they work awesome. The switchback unction is supposed to be programmed into the bulb itself
Heh you got it! Isn't it awesome? Only Con is that when you turn alarm on/off the parking lights where the LED bulb is now doesn't blinks only daylight led strip. Also can u tell me what headlight you use?
+iombie I noticed that too. The switchback led takes a split second to turn on and so when you lock and unlock the vehicle the led tries to turn on but it doesnt fully light up. If you look closely at the bulb you can see a the white parking light flash.
The low beam headlights I'm using is TRS XB h11b 5500 with 35w f3 hid ballast.
+DIY: Car Modz Will look it closely when it get dark later today. Also as for the headlights I googled and there's several and I'm not sure which one. Will you kindly please inbox me at FB w/ links for these? Thanks
www.theretrofitsource.com/components/bulbs/morimoto-h11b-bulbs.html#.V0PklfkrKUk
You edited off the delay in the light switch in your video. I don’t mind, but why would you if its a show and tell?
Are you referring the the 1 sec delay from switching from amber back to white. Just like OEM audi turn signal light function that has the delay as well? The is no switchback led in the market that does not have the delay that is both bright and can tell the difference between the parking and turn signal.
What kind of ledlow beam you have its very bright.
Its not led. Its hid kit for my low beam. HID > LED. HID Ballast
***********************************
35W HID Ballast:
Product Link: amzn.to/2mMJKW4 or amzn.to/2x4PoEu
or
55W HID Ballast:
Product Link: amzn.to/2mciUTh or amzn.to/2xNLMdQ
*************************************
HID Bulb
*************************************
H11B 5500K:
Product Link: amzn.to/2CrlMEa or eBay: goo.gl/cqq51S
************************************
HID BALLAST + BULB KIT
************************************
Morimoto XB35W H11B 5500K
- Review: ruclips.net/video/oFwzFBqyiQ0/видео.html
** I prefer the F3 ballast over the morimoto xb because the f3 ballast warms up to full brightness faster compared to the xb. However, this was 4 -5 years ago so the xb might have been upgraded now to the fast start as well.
- Review: ruclips.net/video/oFwzFBqyiQ0/видео.html
does it mater if you flip over these type 3157 bulbs so the filaments inside the bulbs dont get reversed?
not sure what you mean.. The jdmastar will work with both ways you insert the bulb.. they are not polarity sensitive. it will work white for parking and amber for turn signal.
OK you answered my question they can be inserted either way and still you ll have the amber lite when is suppose to say the amber is the blinker .blinker signal lite
how bout for a 2018 civic hatchback?
Will this fit on 2016 Honda Accord Sport Sedan? Also, do I need the load resistor for the front?
Thanks!
I have the same question. Is one set of resistors on the front or back enough?
You need this one for 2016 Accord: (7443) jdmastar.com/product/260/3030-SMD-7443-White-Yellow-Switchback-LED-Bulbs-Set-of-2.html or amzn.to/2i7CGxA and you are going to need resistors: ruclips.net/video/AJVS6sEE54c/видео.html
ruclips.net/video/AJVS6sEE54c/видео.html for this one I make you only need it installed on the rear to fix upto 4 corner lights.
Gavin S i have two resistors in the front...
Thanks Randy.
Have you tried any of Vleds? How do they compare to the bulbs you have used in this video and your other light videos
I have not tried the vleds yet. Mainly because of the cost. The vleds cost 4x as much compare to these. These are super bright. It light up the traffic lights when I'm stopped at a red light. I don't think i need something brighter.. but who knows, I might just have to get a pair of vleds triton just to compare.
DIY: Car Modz I don't think its worth the price and all that hype, mine just catch in fire last week almost burn my car down
too bad your housing has that amber lense on it, this looks really good on the 2017
Why is hyper flashing a "bad thing"?
It can cause any halogen bulbs still apart of a turn signal to burn out quicker. More thermal cycling = more wear.
Other than that, some people just find it irritating
Hi jeff
Will these work for my 2016 Exl v6 coupe? They look really good
amzn.to/2hosT79
do you know of switchback that has built in resistors that fit the 9th gen accord coupe?
I don't believe there is one a turn signal led bulb that has a resistor built in that will fix the hyperblinking issue. There might be bulbs that vleds make that has a separate resistor that will attach to the led control box but thats about it.
Do you have a bulb recommendation for the rear turn signal on a sedan?
+djbk4lyf92 amzn.com/B019JDCO7K
Thank you.
how do u install the resistors
i haw a question, is it possible to install this in a normal turn signal with two wires or do you need to do some wiering??
In order for the switchback led to work you need to have 3 wires. One wire is ground and the other 2 wires are the positive wires for each light color.
ok thank you! :)
Hello this will work on honda crv 2003?
You need this one (7443): amzn.to/2vtgmel
Is there a bright amber led bulb without the switchback?
Mirvana Smajic yes baby
I bought switchbacks for my 2014 Honda Accord Sport and they look just like the ones in the video (they are JDM ASTARs 3157 3155 3457 4157). The switchbacks don't have the same socket as the stock turn signals though. Do you know where I can get a different socket that would work with these switchbacks, or should I return the switchbacks and go with something else? Thanks!
You need 1157. 2013-2015 Honda accord SEDAN uses 1157. 2013 - 2015 Accord COUPE uses 3157. goo.gl/9u9ud1
Is this plug and play?
What bulb do you have for your Strip light?
ruclips.net/video/yvmjQIGi6YA/видео.html
I bought 2LED 3457A, I do not know why the flash is very fast,
You need resistor to fix hyperflashing.
I see the resistance to sell, but I'm not sure that my sienna can be used.
what year and trim is your sienna van
2014
I can make one that will fit your vehicle wire harness. It will need to be installed on the rear turn signal socket. email me @ diycarmodify@gmail.com for pricing info.
interesting ...
thank you
will these fit on my 2013 altima sedan?
Yes. you will need the 7443 version jdmastar.com/product/260/3030-SMD-7443-White-Yellow-Switchback-LED-Bulbs-Set-of-2.html or amzn.to/2i7CGxA
Can you tell me Which one for my Nissan Altima 2013 please
jdmastar.com/product/260/3030-SMD-7443-White-Yellow-Switchback-LED-Bulbs-Set-of-2.html
Thank you!! You think amazon has it?
Sometimes they have it in stock but currently I do not see it listed. It's like this one amzn.to/2p4h0WB but you need 7443 not 3157
DIY: Car Modz thank you
www.amazon.com/dp/B01ES4AUBM/ref=cm_sw_r_cp_apis_1493792029475
Did it work with 2017 Accord sendan?
Yes. you need 7443 bulb: amzn.to/2ipMhQw or jdmastar.com/product/260/3030-SMD-7443-White-Yellow-Switchback-LED-Bulbs-Set-of-2.html
These avail for a 2013 Honda Fit?
fit does not have dual function blinker lights. You will have to make modification to the stock single filament socket and add in control module.
i dont umderstand why people change the hyper flashing i think it looks good when it flashes fast like that i didnt put any resistors in mine
nice.. everyone has different taste. "Your car.. Your money.. Your style..." ( hmm maybe I should end all my video with this phrase.. and start making some shirts and hoodies..)
Does the 2016 Sedan front turn signal use CK or STANDARD?
Get this.. it works for both ck and standard socket 7443: amzn.to/2mg1MRA
I was wondering because im actually gonna get Vleds. I had the ones you linked but it popped out of the socket and fell into the housing after a couple months. It was a bitch getting it out again.
So i need to figure out if my car use ck or standard
Do you still have the bulbs? Can you send me picture of the bulb base. I noticed that there are many people that buy the wrong bulb.. they buy 3157 instead of 7443. 2016 sedan takes 7443. If the bulb you purchased looks exactly as the bulb in this video review then it is 3157 which is the wrong bulb. You can check if its ck or standard with a test light.
here you go; i.imgur.com/m31X8eF.jpg
so, is it ck or standard for the 2016 sedan?
Can I see the inside of the socket. I need to see the pin orientation ( make sure all the contact points are visible ) and also I would like to see this led bulb fully inserted into the socket.
where can I buy the resistors from?
+Alan email me @ diycarmodify@gmail.com
It is fit 2017 Accord?
You need 7443 for 2017: amzn.to/2KMHWoq
So I bought these for my civic, got some resistors as well but the plug on them to turn into the headlight housing is much bigger than the original one. Did I order the wrong one? My original bulb is 3457 so I figured these should've worked:
www.amazon.ca/gp/product/B06XW61F89/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Its because they are using a universal plug. Not all the socket is the same.. hence why it is bigger than your headlight. You need to trim it to fit.
Does this fit the 2016 Honda Accord Sport Sedan model? Im planning to get the same one as you and was hoping that the link for amzn.com/B017C6B5H6 fits 2016.
no, honda change the bulb for 2016 sedan. I don't remember to which one though.. it might be 3157 or 7443
7443 I believe
I've bought the turn signals and they fit perfectly. (7443) [ www.amazon.com/gp/product/B008C8ZVV0/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 ] Thanks for introducing these to me, I love them so far. P.S. I like the hyperblink on the 2016 Honda Accord Sport. I also bought resistors just incase but do not feel the need to install them.
im wondering if the cops are going to stop u because of the brightness
No, they will pull you over if they can't see it. They will be able to see this no problem. Even during sunny afternoon in San Diego. In the past I did get pulled over once using a very cheap led turn signal before before I upgraded. Cop said they could not see my turn signal even though I did signal.
how much?
+ricardo lascares product link is in the description.
Are you a seller?
no.
can I use this on my 2012 civic park lights?
Yes, you need to purchase the 7443 bulb though: goo.gl/18wuwy or amzn.to/2mR9u42 - Make sure you purchase 7443. Also, you are going to need resistors to fix the hyperflashing issue.
DIY: Car Modz is there any bulb like this with jdmaster that i wont need any resistor?
No, for your vehicle it will require load resistors. You are unable to change the flasher relay on your vehicle because it is integrated into the gauge circuit board. Any led bulb that claims to not need a load resistor is false advertising. They have resistors inside the led bulb. However, those do not last at all because the heat generated from the resistor inside will melt the solder joints and they will become defective.
ruclips.net/video/AJVS6sEE54c/видео.html
DIY: Car Modz thank you sir :)
Never mind....found it.
Mirvana Smajic call m
shit is expensive
Do they make it with just Amber for the rear turn signal on the coupe?
Yes: amzn.com/B019JDCO7K
thank you