This man is a doctor! There is no other channe,l with simple and complete information, like yours! Thanks for sharing videos like this. I have been learned so much from you.
I have been trying to learn more about what all goes into programming lately. Really been trying to research as much as I can. But there’s like absolutely no information out there. I found your channel, you have been extremely helpful. Thank you my friend I subscribed, and will be watching as much of your content as possible! Thanks again, brother!
@@YOYODiagnostic I just got an iProg and sm2..Very hard to find any information anywhere on how to use these tools. So far I have found your channel to be pretty informative. Much appreciated!
I read this ecu only by obd, I have pcm tuner and Amt-Bst for bench use. I am very interested if the amt bst can read this ecu and write with succes. Very helpful video. Thanks
Is it enough to do only the identification, in order for the ecu to be unlocked? In some other videos I see that the pcmflash procedure is different....
If a programmer allows to read this ECU, then he will also show you how the connections are made. There is no need to search the internet for the pinout, just have a programmer that can connect to this ECU.
Hi and thanks for teaching) I need to clone PCR 2.1, I've unlock it, wrote EEPROM and FLASH from native ECM,but it blocked. What else I need to do? Thank you, YOYO!
Hello, i would like to buy scanmatik ori and i would like enormous to know your opinion about this tool and how you find its functionality. Thanks a lot
Hello, SM2 is at a good price but if you intend to activate each license it is much more expensive than top programmers. Do you want to use it for tuning or to replace the diagnostic, I mean J2534 operation. Tell me what you want to do with it so I know what advice to give you.
@@YOYODiagnostic I would like to youse the pcm flash modules and the mdflasher modules. Tuning and reading and writing ecu. That is what I have in mind.
@@vladalexandrucojoc921 you have to find out if you can still use the original SM2 with that dongle. It is possible that new SM2s are written with another firmware that is no longer compatible with that dongle that was hacked. last time i checked this was a year ago and it worked. Don't rely on what you see on RUclips because not many are telling the truth and 90 percent are salesmen. Before you buy, check, because 600 Euro means something, with this money you can buy any clone that you at least know will do part of what you want. I don't want to influence you because I have no advantage but I have some experience in this field namely since 2008 and I can say that I bought many programmers that were not worth buying and I wasted money on nothing. The point is that I am not a big fan of this SM2 programmer, all these years the company has not been able to make their own website where you can see the connections that need to be made to the ECU, instead they used the diagrams from DimSport and I don't think they agreed. Even the Chinese with their PCMtuner programmer managed to make a Website where they show you the connections, so the clone succeeded what the original couldn't. Speaking of SM2, know that EDC15 and EDC16 will not be able to be read, as well as the new ECUs. With that dongle from PCMtuner you are quite limited if you want to start a business. This is my honest opinion about SM2.
@@YOYODiagnostic some good points, I haved buyed tools after I seen videos from you and I am very happy. FC200, cgpro, opcom, carprog, delphi, pcmtuner. I have a slave kess v2 and I want to make my own files. The automatice industry is the most great thing that I experience în my life after I graduate university, from 24.09.2021 when I started to learn this domaine I am very motivated to learn more and more. My favorite tool is autotuner because you dont have subscription, and after is flex but both tools are exepnsive and I dont have that financial power, and I try to find less expensive but good tools to not let me down. Your Chanel is and will be my guide. I will have more atention în buyng tools to not buy tools that you depend to others. Have I nici day and all the best 🙏🙏🙏
Hello, YOYO! Excuse me for wasting your time but there is no any information in the net and VCP Can support does't answer... Need I EDC17 plugin for reading frf file? I can't find boot mode connection of PCR2.1 for VCP CAN pro, only for EDC17...
This man is a doctor! There is no other channe,l with simple and complete information, like yours!
Thanks for sharing videos like this. I have been learned so much from you.
Thank you for the nice comments. 👍
I have been trying to learn more about what all goes into programming lately. Really been trying to research as much as I can. But there’s like absolutely no information out there. I found your channel, you have been extremely helpful. Thank you my friend I subscribed, and will be watching as much of your content as possible! Thanks again, brother!
Thanks and welcome to this Community 🙂
@@YOYODiagnostic I just got an iProg and sm2..Very hard to find any information anywhere on how to use these tools. So far I have found your channel to be pretty informative. Much appreciated!
As always great content!
@@offlimits4622 👍
A very good an informative video.
👍
Very interesting, we would love to see you using pcmflash 1.20 in future videos
I wish you lots of success in your life
Thanks for your support.
I will try to use it more.
Bonjour pcmflsh et kt200 le quelle et mieux ?
I read this ecu only by obd, I have pcm tuner and Amt-Bst for bench use. I am very interested if the amt bst can read this ecu and write with succes. Very helpful video. Thanks
👍
last time when I unlocked this ecu removed eeprom from board read eeprom unlocker pcr 2.1 write eeprom redy for kess😊
👍
I just got this myself. But i also got my autotuner.
But i must say i like KT200 much better then SM2pro, much more ecus and compability
I agree with you.!
Is it Trasdata Italian version better then KT200?
👍
Hey friend, loved your video and channel. Sm2 pro vs ktag? Which is the car produce date that it can work? Thabk very much
Ktag clone till 2010. And sm2 pro clone till 2012-2014
Thank you very much. After 2012 only with original tools right? I need for hobby on home and friends cars so needs to be cheap.
Is it enough to do only the identification, in order for the ecu to be unlocked? In some other videos I see that the pcmflash procedure is different....
What cable are you using connecting scanmatic and godiag adapter? Db25 m to db25 f?
Hey @yoyo so what is the functionality of the godiag then? Do you still have to solder the resistors??? Still confused thanks
@@unknown-ol9mn it has a fuse included but I'm to lazy. I will show you in the next ECU.
@@YOYODiagnostic thank you. Appreciate all your videos been watching a long time now slowly starting so quite new to a lot of stuff 👍
Is this SM2pro Clone a rework. Do you have more information about this?
yes, I changed some components
@@YOYODiagnostic I am very good at soldering. Do you have a list of components?
Hello sir.can i read and write on the car with FC200? Thank u
@@MohammedAli-mz2vl FC 200 has no OBD function.
@@YOYODiagnostic thank u sir
Some ECUs pinouts are not easy to find. Bosch ecus pinouts are very easy to get. How about less known ecus. Like pcm150f ecu.
If a programmer allows to read this ECU, then he will also show you how the connections are made.
There is no need to search the internet for the pinout, just have a programmer that can connect to this ECU.
gostaria de conseguir ler edc 17 cp54 v6 para dpf off com sj2pro
Good job.
Can sm2 pro read and write BMW ecu. Thanks
Yes 👍
@@YOYODiagnostic thanks bro, I want to add to my ecu tools
Scanmatik 2 pro how much the update every year and do it have tokens
Hi and thanks for teaching) I need to clone PCR 2.1, I've unlock it, wrote EEPROM and FLASH from native ECM,but it blocked. What else I need to do? Thank you, YOYO!
Hello,
You must flash the FRF.
You can use VagCan pro
Thank you very much!
@@Олег-ъ9л6ъ 👍
What is actually the benefit of the godiag cable, seller in Aliexpress claimed that i can unlock ecu without open it.. is that true?
No, it's not true. Godiag it have different resistor and you don't need to solder, but it is necessary to open the ECU.
Hello, i would like to buy scanmatik ori and i would like enormous to know your opinion about this tool and how you find its functionality. Thanks a lot
Hello,
SM2 is at a good price but if you intend to activate each license it is much more expensive than top programmers. Do you want to use it for tuning or to replace the diagnostic, I mean J2534 operation. Tell me what you want to do with it so I know what advice to give you.
@@YOYODiagnostic I would like to youse the pcm flash modules and the mdflasher modules. Tuning and reading and writing ecu. That is what I have in mind.
@@vladalexandrucojoc921
you have to find out if you can still use the original SM2 with that dongle. It is possible that new SM2s are written with another firmware that is no longer compatible with that dongle that was hacked. last time i checked this was a year ago and it worked. Don't rely on what you see on RUclips because not many are telling the truth and 90 percent are salesmen. Before you buy, check, because 600 Euro means something, with this money you can buy any clone that you at least know will do part of what you want. I don't want to influence you because I have no advantage but I have some experience in this field namely since 2008 and I can say that I bought many programmers that were not worth buying and I wasted money on nothing. The point is that I am not a big fan of this SM2 programmer, all these years the company has not been able to make their own website where you can see the connections that need to be made to the ECU, instead they used the diagrams from DimSport and I don't think they agreed. Even the Chinese with their PCMtuner programmer managed to make a Website where they show you the connections, so the clone succeeded what the original couldn't. Speaking of SM2, know that EDC15 and EDC16 will not be able to be read, as well as the new ECUs. With that dongle from PCMtuner you are quite limited if you want to start a business. This is my honest opinion about SM2.
@@YOYODiagnostic some good points, I haved buyed tools after I seen videos from you and I am very happy. FC200, cgpro, opcom, carprog, delphi, pcmtuner. I have a slave kess v2 and I want to make my own files. The automatice industry is the most great thing that I experience în my life after I graduate university, from 24.09.2021 when I started to learn this domaine I am very motivated to learn more and more. My favorite tool is autotuner because you dont have subscription, and after is flex but both tools are exepnsive and I dont have that financial power, and I try to find less expensive but good tools to not let me down. Your Chanel is and will be my guide. I will have more atention în buyng tools to not buy tools that you depend to others.
Have I nici day and all the best 🙏🙏🙏
Sm2pro is best in cloning for ecu korian car and Japanes or ktag
SM2pro is better
Hello, YOYO! Excuse me for wasting your time but there is no any information in the net and VCP Can support does't answer... Need I EDC17 plugin for reading frf file? I can't find boot mode connection of PCR2.1 for VCP CAN pro, only for EDC17...
Hello,
unlock the ECU the first time and you'll be able to do it via OBD. you can use ODIS or VAG Can pro.
Hi mate, can the same equipment be used for obd2?
Hi.
No only bench or boot
Have you reworked your SM2pro Clone?
Yes
@@YOYODiagnostic can you do a video or share infos about what needs to be changed? Thank you
@@matteo5754
👍
Which car has the control unit installed?
1.6tdi CAYA CAYB CAYC
Whats the benefit of using this tool? We can already unlock without this ...no?
Yes, I'd like to ask the same... Doesn't SM2 have the GPT support built-in?
Can i use any j2534 device for this??
You can't use any j2534 device, only reliable ones, the sm2pro Chinese copy is quite reliable..
So even with sm2 pro we need resistors right?
Yes only the FC200 doesn't need a resistor. Bench and Boot no resistor for FC200.
Haw to unlock ?
@@MuhammadBilal-qh3dc you read the eeprom, modify it and then write back. That way you will have this ecu unlocked.
ქართველი ხარ?