Aye still useful 4 years later-thanks mate my bumper cover got effed in a fender bender and I didn’t wanna spend 350 on a quote for body work. Now I spent less than a hundred and I can use this information again.
Going to fix some damage to my tear bumper and paint it. Figured the painting might go better with the bumper removed, especially where overspray is concerned. Thanks for taking the time to do this video. Very helpful!!
Straightforward and helpful video. Got the bumper, brackets and reflectors online, did the work myself and saved several hundred dollars. Thanks for posting. 👍🤠
Thank you. I need to repair a dent in the right corner and the heat shield from the muffler makes it impossible to get my hand up there. Now I can just remove it he bumper and fix it. Thank you so very much for taking time to share this.
Thanks a bunch for this video. Some idiot back into my Corolla while I was in the grocery store and left no details for insurance or anything so now I’m stuck. Since they is so easy I can just order a bumper and replace it since mine is now dented so bad at the drivers side that the side of the bumper is popped out it won’t go back in.
Thanks for this video, last night I backed up into a small fence with my mother in laws toyota corolla and got hung up and it tore bumper off . Well half of the bumper. So now I will see if it is something I can put back on my self. This helped to understand where it is suppose to connect. .
Bought mine used from a toyota dealer 3 months ago and the bumper flew off on the highway! Need to replace it but definitely going to use some stronger bolts to hold on to it, maybe even chassis mount it!
I wish you would have shown the clips on the side so I could understand how they work. My friends bumper is falling off the clips on the passenger side, or it just won't stay clipped in.
Hey man, you said you don't like those "finicky" clips? Why! If those were metal screws they'd be rusted beyond removal and you'd cause damage to the bumper trying to take them out. They use plastic clips because plastic does not corrode an THEY'RE NOT "FINICKY" if you spend $5 on a clip removal tool at any automotive/hardware store. SMH, and here you are telling folks they might need a flathead or needle nose to remove them? People, go buy the clip tool. You'll damage the clips trying to remove them with anything else and then your bumper (or any other part of the car) will not fit back on tight or the way the manufacturer intended it to fit. You'll be zipping self tappers all into it trying to get it right. The clips are a great hardware invention and deserve respect for the job that they do! #cliplivesmatter
I have an 09 Corolla XRS that I just bought and the front and rear bottom parts of the bumper are loose, looks like broken clips and broken inner plastic that the outer bumper plastic mounts to. Do you think that it'sexpensive to fix?
Joe C. You don't need them on just keep the 4 metal screws on the top of your bumper also the plastic screw clips at the side next to the tires you can leave them off your bumper won't fall off I have mine off and my bumper isn't going anywhere I'll be purchasing quick fasteners release soon because I'm going lower on Coilovers next year and I have to take my bumper off every time I'm leaving my Driveway
Everyone i want you all to know this. Jesus is King and he is returning soon. He died for you and me on that cross, for our sins and rose from the dead. If you wanna be saved give your life to Him. because after this is either heaven or hell.
Can you help me. 2013 corolla in the front wheel well there's a silver screw holding the inner wheel well in. it's just in front of the tire. do you know where I can get that? I think there's also a clip that the screw goes in to.
I'm not quite aware of what screw you are referring too, however, you could go to your local hardware store and pick up a screw that is either the same, or similar. Or you could also get a clip from there too. If it's a Toyota specific item, try going to a dealership or go on eBay/Amazon.
how bout putting the bumper back on? would you say it is pretty straightforward? somebody put a big dent in the back-left corner on the bumper and i can't pop it with the bumper attached. looks like maybe there are too many layers. i'm thinking about removing it and popping the dent on the outer layer and putting it back on but i'm worried it may be too much trouble to reattach.
The Black plastic clips on the bottom and the 2 plastic screw clips one on each side at the top of the bumper you don't need to put them back on you only need to put the 2 metal screws back on and it'll stay in place also installing quick fasteners release is way easier and fast when removing the Front and Rear bumper that's what I'm gonna install on my Corolla I hate those Black plastic clips on the bottom of the bumper there's 2 on the Front bumper I had a hard time taking them off that's why I'm not putting them back on also all the metal screws at the bottom of my Front bumper I left them off and my Front bumper isn't going anywhere I only have the 4 metal screws holding the top of my Front bumper but like I said I'll be purchasing Quick Fasteners release soon because I plan on going lower on Coilovers next year I'm gonna need to take off my Front bumper every time I'm leaving my Driveway
They are called bumper reinforcements or impact bars. They are made of high strength steel (HHS) and are pretty much not repairable because heating the steel affects the tempering and makes it brittle.
westcoast2k8 I didn't have to raise the coilovers at all, but you need to jack up the car in order to put the wheels on. The car is just as low as with my other wheels.
Thanks for these videos. but your mods confuse me, you have vortex generators for better fuel efficiency/less drag, but you have big mud flaps which counter any benefit gained from the vortex generators... 🤔
They're for show only. I doubt they reduce drag to any measurable amount. The same as the useless spoiler on the trunk lid which may actually increase drag. They're put on every car model that's an S or "sport" version. Lipstick on a pig.
To be honest, I'm not quite sure how to remove the 2015 Corolla's bumper because it is a different generation. However, there is a possibility that they are pretty much the same.
ThatTRDrolla I realized beside the bolts on the tail light housing there are also 3 white plastic things attached to the wires to hold them in place. How to un attach it?
Thank you very much for the info... Because may car also is Toyota Corolla 2013 almost 2 years from now. Thanks for this video and your car modification.....
Sorry to bother! Just one more question, so I should be getting the new 2011 corolla rear bumper soon (already have the 2011 taillights) and I'm just wondering if there might be anything else I need to know? It should be installed back on almost the same way as it was removed in this video?
1. You need a trim removal tool - only $5 2. You need a tripod if you’re serious 3. You need a fixed light so we can see what you’re doing 4. The bit I needed - pulling the bumper off the brackets - you actually missed the crucial part as your camera was pointing in the wrong place. Very annoying
Aye still useful 4 years later-thanks mate my bumper cover got effed in a fender bender and I didn’t wanna spend 350 on a quote for body work. Now I spent less than a hundred and I can use this information again.
Going to fix some damage to my tear bumper and paint it. Figured the painting might go better with the bumper removed, especially where overspray is concerned. Thanks for taking the time to do this video. Very helpful!!
Straightforward and helpful video. Got the bumper, brackets and reflectors online, did the work myself and saved several hundred dollars. Thanks for posting. 👍🤠
Thanks Bro for taking the time to make this awesome video that I requested. You save me couple hundred dollars on this one. Hats off to you!
No problem! That's great!! I'm happy to hear that this helped you!!
Thank you for the video, was very helpful- after wathcing, it took me less then ten minuts to remove the bumper.
Thank you for go through the trouble of removing the bumper just to show us how to do that. Thank you so much.
Thank you. I need to repair a dent in the right corner and the heat shield from the muffler makes it impossible to get my hand up there. Now I can just remove it he bumper and fix it. Thank you so very much for taking time to share this.
I just want to say thank you so much for the time you took to make this video it really helped me out is my first time doing this thank you again
i love how he says “HLO EVERYONE” its really cute!
Symmetrical is the word you were looking for. If a screw is on one side it's on the other. Thanks for the vid
Yeah, that's the word I was aiming for. I'm glad this video was helpful!
Awesom vid
Those plastic screws just keep going round doesn't seam to.want to.come off any solutions for this thanks
Thanks a bunch for this video. Some idiot back into my Corolla while I was in the grocery store and left no details for insurance or anything so now I’m stuck. Since they is so easy I can just order a bumper and replace it since mine is now dented so bad at the drivers side that the side of the bumper is popped out it won’t go back in.
Bob, I am with "The Polaris" on this. Thank you so much for posting this!
Thanks for putting this video I just got a hit last night but now I know what I can fix and what not to fix
Thanks for this video, last night I backed up into a small fence with my mother in laws toyota corolla and got hung up and it tore bumper off . Well half of the bumper. So now I will see if it is something I can put back on my self. This helped to understand where it is suppose to connect. .
You're welcome, I'm sorry to hear that. Good luck
Do you know the part number for the clips, or that is standard in most cars? Thanks
Thank you so much. Now I come to Know how to remove rear bumper from your video. 👍👏👏
Do you think it's possible to add a 2011 year bumper to a 2010
Thanks for taking the time to make this video. It's great and very helpful
No problem! I'm glad it help!
Bought mine used from a toyota dealer 3 months ago and the bumper flew off on the highway! Need to replace it but definitely going to use some stronger bolts to hold on to it, maybe even chassis mount it!
It might be a good idea to spray those undercarriage clips with silicone lube oil to avoid breakage
Молодец что снял видео по снятию именно заднего бампера Тойота королла.Не мог найти подробно как это делается.Спасибо!!!
God video Bro!! greetings from Argentina
I wish you would have shown the clips on the side so I could understand how they work. My friends bumper is falling off the clips on the passenger side, or it just won't stay clipped in.
Thanks for the video!
Very informative and useful.
Thank you 😊
Great video, thanks for sharing now to fix the wife’s car!
Nice sharing ! Thank you! Keep up the good work, my friend ! See you next time ! 👍 👍❤️
they are called pop snaps, you pull the center out and it pulls out easy. they come in different sizes be careful, best to replace with new ones
very helpful thank you
How much did you drop it ? Is it a drop kit ? And what size are your rims and tires if you don't mind me asking. Thank you for your time.
Thank you for your time.
I was wondering how to remove fender.
Hey man, you said you don't like those "finicky" clips? Why! If those were metal screws they'd be rusted beyond removal and you'd cause damage to the bumper trying to take them out. They use plastic clips because plastic does not corrode an THEY'RE NOT "FINICKY" if you spend $5 on a clip removal tool at any automotive/hardware store. SMH, and here you are telling folks they might need a flathead or needle nose to remove them? People, go buy the clip tool. You'll damage the clips trying to remove them with anything else and then your bumper (or any other part of the car) will not fit back on tight or the way the manufacturer intended it to fit. You'll be zipping self tappers all into it trying to get it right. The clips are a great hardware invention and deserve respect for the job that they do! #cliplivesmatter
God bless, thanks from Iraq
Thanks a lot. It really helped
Thank you very much really helping me a lot
Congratulations, now it takes 2 people to put it back on.
No it doesnt
Hey Buddy Thnx To you I got Idea about Your Rear Diffuser :D Thnx Man!
Is this the s bumper or the base model bumper? That being said isn’t the base bumper the same as the s apart from some added arrow, and diffuser?
How do u put it back on
watch the video in reverse
@@southstar66 But the audio will sound like Russian, so you'll also need a translator.
Can I know what clip size I need to used for a rear bumper on a 2011 Toyota Corolla s
I always have some old towels lying around that I would place underneath the bumper just in case it slips out of your hands and hits the ground.
Thank you so much.. you made it very easy and very clear! love twitch more videos for you!
Thank you! I'm glad this video helped!!
Great video
I have an 09 Corolla XRS that I just bought and the front and rear bottom parts of the bumper are loose, looks like broken clips and broken inner plastic that the outer bumper plastic mounts to. Do you think that it'sexpensive to fix?
Joe C. Same thing just happened to my 2012 Corolla did you fix yours yet and was It expensive?
Joe C. You don't need them on just keep the 4 metal screws on the top of your bumper also the plastic screw clips at the side next to the tires you can leave them off your bumper won't fall off I have mine off and my bumper isn't going anywhere I'll be purchasing quick fasteners release soon because I'm going lower on Coilovers next year and I have to take my bumper off every time I'm leaving my Driveway
Nice video man! Thanks! ( BTW sweet ride!)
Very good. Thanks from Iraq
What is the tool you use to take out the nut on bumper? I need one
How can I install the lights on the rear bumper? I don't know how to mount the cables
Everyone i want you all to know this.
Jesus is King and he is returning soon. He died for you and me on that cross, for our sins and rose from the dead. If you wanna be saved give your life to Him. because after this is either heaven or hell.
Can you help me. 2013 corolla in the front wheel well there's a silver screw holding the inner wheel well in. it's just in front of the tire. do you know where I can get that? I think there's also a clip that the screw goes in to.
I'm not quite aware of what screw you are referring too, however, you could go to your local hardware store and pick up a screw that is either the same, or similar. Or you could also get a clip from there too. If it's a Toyota specific item, try going to a dealership or go on eBay/Amazon.
how bout putting the bumper back on? would you say it is pretty straightforward? somebody put a big dent in the back-left corner on the bumper and i can't pop it with the bumper attached. looks like maybe there are too many layers. i'm thinking about removing it and popping the dent on the outer layer and putting it back on but i'm worried it may be too much trouble to reattach.
Putting the bumper on is just as easy. All you need to do is line it back up and then click in the clips and then screw it back on.
I got a 2010 Matrix, would U say clip and screw locations are about the same?
Yes, most likely they are the same or very similar. They may not be exact but they would be in the same area.
What's the piece behind the bumper cover called?
Thanks brother 👍🏻👍🏻👍🏻
Thanks
the toyota Corolla 2012 is my dream car.
Nice! The Corollas are great cars!
No complaints on mine!
thank you!!! Very helpful.
No problem! I'm happy to help!
The Black plastic clips on the bottom and the 2 plastic screw clips one on each side at the top of the bumper you don't need to put them back on you only need to put the 2 metal screws back on and it'll stay in place also installing quick fasteners release is way easier and fast when removing the Front and Rear bumper that's what I'm gonna install on my Corolla I hate those Black plastic clips on the bottom of the bumper there's 2 on the Front bumper I had a hard time taking them off that's why I'm not putting them back on also all the metal screws at the bottom of my Front bumper I left them off and my Front bumper isn't going anywhere I only have the 4 metal screws holding the top of my Front bumper but like I said I'll be purchasing Quick Fasteners release soon because I plan on going lower on Coilovers next year I'm gonna need to take off my Front bumper every time I'm leaving my Driveway
Any idea where to get the screws like this one here? 0:47
Where did you get your wing?
You took off is the rear bumper cover, not the actual bumper.
very help full. thank you very much
I'm happy to help!
Thank you brother , 👍👍👍
Looking for actual bumper damage and repair as opposed to bumper cover. Anybody? Don't see any vids dealing with under the cover on YT.
They are called bumper reinforcements or impact bars. They are made of high strength steel (HHS) and are pretty much not repairable because heating the steel affects the tempering and makes it brittle.
Please anyone know how to remove rear bumper on Toyota avensis hatchback t25 2006 to 2008 car.
Are those the new rims you were talking about on your last video? if so what size are they?
Yes they are! I'm gonna upload a video very soon on them! They are 17 x 8
ThatTRDrolla ahh, I knew it. cool. 17 inch are a good size. did you have to raise your car to install the rims.
westcoast2k8 I didn't have to raise the coilovers at all, but you need to jack up the car in order to put the wheels on. The car is just as low as with my other wheels.
Gracias , fue de mucha ayuda .
💎hey man thank you so much💎💖💖💖 ❤❤❤
Thank you buddy
Thanks for these videos.
but your mods confuse me, you have vortex generators for better fuel efficiency/less drag, but you have big mud flaps which counter any benefit gained from the vortex generators... 🤔
They're for show only. I doubt they reduce drag to any measurable amount. The same as the useless spoiler on the trunk lid which may actually increase drag. They're put on every car model that's an S or "sport" version. Lipstick on a pig.
The 2014 altis has sensors on the rear bumper, so how different do you think it'll be to remove the back bumper?
If I were guess, removing the bumper would be rather the same process, but for the sensors there is probably a connector you would need to unclip
thanks. I think I'm just going to just get it repaired
how to remove the bumper on a 2015 toyota Corolla?
To be honest, I'm not quite sure how to remove the 2015 Corolla's bumper because it is a different generation. However, there is a possibility that they are pretty much the same.
are they the same
Does anybody know if the 2013 rear reinforcement bar fits 2014 and up??? They look the same
I believe it will.
To replace the Corolla S 2013 tail light do I need to remove the bumper?
No you don't need to remove the bumper.
ThatTRDrolla Ok thank you brother :D
No problem!
ThatTRDrolla I realized beside the bolts on the tail light housing there are also 3 white plastic things attached to the wires to hold them in place. How to un attach it?
Please help me to find same as your spoiler and Thule roof bar... thanks bro..
The spoiler is on eBay and the roof rack I bought at a local shop. You may find it on Amazon
Thank you very much for the info... Because may car also is Toyota Corolla 2013 almost 2 years from now. Thanks for this video and your car modification.....
Hi I'm wondering if it might be possible to put a 2011 corolla rear bumper on a 2010 corolla?
Yes it is! However, you will need to get the 2011 Corolla's taillights, the 2010 taillights won't fit the 2011 Corolla bumper.
Thanks!!!
No problem!
Sorry to bother! Just one more question, so I should be getting the new 2011 corolla rear bumper soon (already have the 2011 taillights) and I'm just wondering if there might be anything else I need to know? It should be installed back on almost the same way as it was removed in this video?
No worries! Im happy to help! Now that you have the taillights, you are all set. That's all you need.
You got knowledge given from God the creator
Thanks amigo
Damn. We even the same junk in the trunk... lol 10in sub and milk crate with various ingredients
1. You need a trim removal tool - only $5
2. You need a tripod if you’re serious
3. You need a fixed light so we can see what you’re doing
4. The bit I needed - pulling the bumper off the brackets - you actually missed the crucial part as your camera was pointing in the wrong place.
Very annoying
What are the specs and where did you buy the rally armor mud flaps?
www.rallyarmor.com and what specs for what?
U think that bumper would fit into a 2010??
Yes it will, you will need the 2010 taillights though.
God bless you .👍
how to remove the sensors because i do have 4 of em
ahmed haikel There should be connectors that just unplug.
and so his wife comes home and says what the fuck are you doing to my car???
good job
Thank you!!
Is good jod
Me gustó
2009 and 2010 are different style not same as yours
The 2009 to 2013 all have the same locations for the clips and are the same to remove. The only different is that the bumper cover looks different.
#herovid