Only a few welders know this! Secrets of Flange TIG Welding Distortion
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
HTML-код
- Опубликовано: 16 мар 2024
- For information on welders and peripheral devices, please contact the manufacturer to receive a more accurate answer.
↓↓↓↓↓↓↓
korea@nswel.com
Hello everyone.
Previously, we introduced information about welding distortion in Flange Inside.
So how does inside welding distortion apply when welding the outside of a flange?
Today, I captured that content in a video.
When welding the outside of a flange at the same speed and amperage, the inside weld has a significant impact on the result.
It will be helpful if you apply these phenomena appropriately depending on the situation.
Thank you for watching and have a great week.
#flange
#TIG
#welding
#distortion
#test
#factory
#machine
#steel
#crafts
#Tips
#secret
#trick
#amazing
#DIY
#idea
#future
#technology
#technique
#pipe
#HAGOJIBI
#video
#weldingmachine
#tigwelder
여러분 안녕하세요.
이전시간에는 플랜지 인사이드에서 용접왜곡에 대한 내용을 소개시켜드렸습니다.
그러면 인사이드 용접왜곡이 플랜지 아웃사이드를 용접했을때에는 어떻게 적용될까요?
오늘은 그 내용을 영상에 담았습니다.
같은 속도와 같은 암페어로 플랜지 아웃사이드를 용접했을때 인사이드 용접이 결과에 많은 영향을 주게 됩니다.
이런 현상들을 상황에 따라서 적절히 적용해보시면 도움이 되실 겁니다.
시청해주셔서 감사합니다 그리고 즐거운 한주 보내세요.
용접기 및 주변기기에 대한 내용은 제조사에 문의 하시면 더 정확한 답변을 얻으실수 있습니다.
↓↓↓↓↓↓↓
korea@nswel.com
내쇼날시스템 대표전화
051-941-9701~2
ขอบคุณที่สอนและช่วยพัฒนาฝีมือครับ
Please enable translation for subtitles. The sign language is too difficult to understand thanks
outstanding arc shots ,,, well done.
but the point of the video is beyond me ,, I prefer d the old caption format
Термодеформации в нержавейке это вообще песня на часы примеров и объяснений. Где-то помогают симметрично положенные швы, где-то добавочный угол между деталями, где-то кувалдометр. В случае фланцев у автора, проще всего скрутить болтами два, и быстро пройти максимальным током. Если только не варятся элементы атомных реакторов, то с учётом монтажа с прокладками, какие-то незначительные искривления фланцев здесь вообще значения не имеют.
Thanks mr Hago Jibi. I am learning to weld at the moment so this eas great 👍🇩🇰
Thank you for your outstanding efforts.
또 하나 배웁니다 감사합니다
EXCELENTE VIDEO¡¡... Y MUY FACIL DE ENTENDER¡¡...SALUDOS DESDE MEXICO¡¡
Ok, fantástico tutorial maestro, gracias por compartir tanta información y conocimientos,un saludo cordial y por supuesto un merecido like desde Narón (Galicia)👍🤓😜
Wow shining 🎉
Thank you.MASTER.
в таких условиях грех так не варить😅, ты свари так неповоротный стык лежачий на полу через зеркало😉
Nice job man💥
I like your videos.They are very useful for me. It is a pity there is no text.
I've always started the inside weld before the outside. The tacks usually at outside,so i go for inside first. 🎉🎉🎉
Если все ровно стыканули , то и ровно свариться , если сваливать без остановок . Никогда проблем с фланцами не было . Вот вы покажите лучше , как на 60 трубу со стенкой 3 мм сварить ложнмен, что бы её не гнуло )
So higher amperage causes less distortion when welding at same speed?? Counterintuitive
Welding on the downhill side even a little causes the shrink line that you are getting in the center of the weld. It also causes the fillet weld to be slightly convexed.
nothing is understood
후렌지판이 용접전류에 휘어버리는
You make it look so easy :)
ASME B110 'slip-on' flange 316 SS, I welded thousands of them for the Navy.
Таких приспособлений у меня в России к сожалению нет. И аппарат вижу впервые. Я свариваю на ewm tetrix 550, аппарат терпит нагрузку, но функций мало.
i want to get into the world of TIG... but is it recomendable? i other words should i invest time and money on it
Si se entiende. Para evitar la deformación hay que soldar la brida por dentro.
Ничего не понял, но было интересно
Bei 3mm Wandstärke reicht eine a2 Nahtstärke. Schneller schweissen gibt dünnere Naht also weniger Schweißverzug.
Für solche Schweißnaht 3 Minuten.
Bang. Untuk mesin las buat pemula .. Yg recom merk apa ya ?? Spill dong
Mesin las tig merk rhino,
Standart!
Great looking welts. But looks are not everything. I suspect not very much penetration. Would like to see them cut and examined. To me, the arc looked too far away for any kind of penetration. It looks like he just laid iron over a crack.
Lol it's hagojobi you think it's his first time welding a flange
@@buildalifeworthliving4551 probably not. It still takes a little bit of talent to keep an arc, and keep a good puddle. Like I said, the weld looks good. Just saying .
Well done bro, how do you call that rotating machine?
Rotating machine 🤗
Your are welcome
EXPLICARLO CON PALABRAS O SOBRE ESCRIBE EN EL VIDEO LOS QUE VEMOS NO SOMOS SORDOMUDOS
아르곤 용접을 배우고 싶습니다.
Dude you need to translate with text.
why doesnt my tig welder work like that ? oh thats right , i paid 700 dollars , no 7000 dollars 😆😆😆😆😆
可以用另一种方法、高电流自溶焊也可以不变形。
턴테이블 우리샵장에 있는 거는 돌려조이는건데 저건 엄청 편해보여서 탐나네요 ㅎ
음악소리는 들리는데 말소리가 안들리는건 저만 그런가요?
Потом проточить и выровнять плоскость на токарном станке.
Appears to be Aluminum welding with argon, and not helium, as in heliarc...
💯💯💯💯💯💯👏👏👏👏👏👏👏
為什麼他的熱量可以保持在最前端那麼穩定R
已焊接過尾巴都不會熱紅熱紅的 感覺像沒有什麼熱量殘留住
예전처럼 나레이션은 안하시나요?
Say please😮
Prefiero los subtitulos.
準備 作業 片付け
24分 12分 24分
休憩
6分
12
12分 ロボット
仮溶
nice weld but since it is from the mouth of a tube and without its chamfer corresponding to that thickness I don't think it will achieve good penetration so when it comes to being for a pressure tube it is a useless thing that is aesthetic and that endangers a once that pipeline comes into operation...that is why once it is finished and in the result we see that characteristic line of the welding trying to fill in the poor preparation of that piece...very aesthetic yes...but it is not intended that in this type of work
p.s: Regarding what I am saying, that is why the video does not show us the other part of that weld.....which is the verification of whether the weld has penetrated correctly and has fused those two pieces to have a single piece sealed......if that piece were very important, in addition to the liquids to see if it has been done correctly, they also have the x-ray system to give that extra check...because as I say, those pieces are usually placed near other workers in other jobs...and putting their lives in danger is something that does not go with the values of a good worker...because if everyone did the same botched things like the one we see, many would have already lost their lives at the hands of the incompetence of someone who claims to call himself a professional (no matter how many degrees or engineering degrees this operator has)
by the way...that thing about it being a trick that few welders know......this is something that they teach you from the beginning from any teacher who calls himself a master......it's something fundamental in the craft of metal structures, know the behavior of various metals and how stresses deform and act when heat is applied.
You need to narrate this. Even if you don't speak English there are plenty of tools to translate this. I don't understand what you're trying to convey by just pointing at things.
WTF are your hand signals?
I only see sad pipes :(
If this video is made for deaf people, you can cut the lift music also.
Talk it works better. The hand signals mean nothing to anyone...
Well I don’t know who taught you to weld like that all your doing is roll the weld down hill and creating air pockets and welding to hot far to many amp you nearly crystallised the nickel in the stainless
Using a rotator and trying to teach is laughable.... my sister could weld using a ratator..... freehand that inside a pipe bridge, then I'll be interested
Hola👋 desde España..
Tú cómo harías en una tubería de 250 MSO... NO LE DOY CON LA TECLA....
where's the fucking subtitles? didn't understand shit bro
야말해라
Sorry video
ПОЛУЧАЕТСЯ,ЧУВАК ВАРИТ СВЕРХУ ВНИЗ!!СТОИТ ЛИ ЕГО СМОТРЕТЬ ДАЛЕЕ-НЕ ДУМАЮ
Полный бред....
Присадку меньше диаметром и можно ток увеличить и скорость позиционера и всё будет отлично, учись у Русских!!! 💪👍
🤮🤮🤮
очень итересно но ничего не понятно! во первых прихваток слишком мало на 100 диаметр каждые 3-4 сантиметра, минимум 2 прохода,