A simple 5 channel Alpine amplifier install in a Hyundai
HTML-код
- Опубликовано: 24 апр 2017
- In this video we do a simple 5 channel amp install. We take you along and show you what we do when installing one. The amp we are installing is a Alpine MRV-V500. enjoy
music by
Cumbia No Frills Faster by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Bushwick Tarentella - Thatched Villagers by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/ 
Авто/Мото
that extra mile of vacuuming the area before the install is awesome I've seen another installer how doesn't care and just plops the amp right on top of the trash oh and the you could have just open the door part had me rolling
The Beige Wonder thank you, never enough soap.
Curious, what does a amp install like this cost at 5 star?
Love to see you guys show that ultra clean work with the amp mounting and wiring. The music was great too! I've got both the Pioneer and Kenwood 5 channel amps I'll be testing in the upcoming weeks. Merry Christmas to everyone at Five Star Car Stereo!
Thank you and Merry Christmas Big D!
When you look up O.C.D. in the dictionary there is a picture of dean wiring up a 5 channel amp.
When you have all the tools to do a clean install it makes everything else easy. I ordered some Tessa tape and some of those things that go on the end of the wires and it makes such a big difference
Awesome job yet again, even enjoyed the music in the soundtrack LOL. Have a good day guys!
jmaslin thanks, wanted to try something different for the music.
Didn't realize how much I would miss Fernando until he was absent from an entire video!
You guys make it seem so easy when it comes to installing radios or amps... I'M going to tackle this job on my own car soon. Thanks for posting awesome videos.
E Puebla it is all in the pre planning. We always map out what we are doing before we do it.
I learn so much from watching you guys! Great work
Now this is what you call clean work and well done!
what you guys should do is MAKE A VIDEO ON TUNING YOUR AMP OTHER THAN GAINS. ALSO HOW TO SET UP AND TUNE A PROCESSOR PROPERLY
Direct Connectionz it is coming
Stereo Fi Electronics Well what you should do is leave if you are going to be mean. I enjoyed the video I don't know what is wrong with you.
You guys have the cleanest builds! Love the quality!!
I'm still saying ....you guys are the Best.... clean and good looking install .... you give the true meaning of 5 Stars!
Ricardo Vázquez thank you
Another pro install. I appreciate you guys explaining your thought process as you go too, excellent tips. You guys are great!
I'd be interested on how to set the gains on the amp if you haven't covered that already.
J Will we are working on something, stay tuned
You guys a just amazing clean clean installs
Every thing is common sense
The very best I've ever seen I've mention you guys to a lot of my friends and learn so much
Doing installs the correct and best way thank you
Cant wait for your next video
Awesome! I love installing audio equipment! Unfortunately I'm in a different profession. I look forward to watching all your videos!
I swear the cleanest installs. Great job guys. Always enjoy your videos.
Sinister thank you very much
Love your work ethic and installs!!! Boy I do miss having a GREAT car audio system!
luvmybeemer what happenstance to your system
you guys do some of the cleanest wiring ive seen
Awesome job once again by Dean and Fernando! 👌👍
....9 minutes in I realized you sped the up...I should drop by for a 12 minute install...you guy's are fast.!!!!!
So what if you use the heat on the floorboard will it over heat the amp please reply I'm actually using your video right now to install
I've been in the installation game for 20+ years worked in a lot of different shops in my area. I have to say you guys do clean work and work well together. keep up the good work. also where can I order the rivet gun?
Brian Patterson thank you. That one has died so we upgraded to a heavy duty
Muzata Heavy Duty Blind Rivet Nut Kit Set, Riveter Tool, Rivet Nut Gun, Thread Hand Riveter, Rivet Gun, Riveting Tools with 100PCS Metric Rivet Nuts Included M3 M4 M5 M6 M8 www.amazon.com/dp/B01M59GTH8/ref=cm_sw_r_cp_api_vZwazbT2QWPMD
fair price thanks for the link.
Really digging the music on this one 👍🏼👍🏼
This video is actually super helpful. I give you guys a thumbs up. Thanks for making the video 👌👍
DjBeatz _ thank you, I'm glad you liked it
Question how do I make my mids rack of 4 to 6 speakers to play in 2 ohms or is it best to jus leave it at 4 n how to pick the kind of amp for this set up
Hi can u please me setting gains on my 4 channel amp(blaupunkt) which is powered by pioneer avh 299bt..
Would be great if I can set it using multimeter
Wow, really clean work. Nice!
Great quality teamwork!
I follow other " popular car audio guys" here on youtube because of all the neat stuff they do and machines they have, but you guys keep it so simple and so professional and easy to understand. I love the simplicity of your work, cleanliness, and professional look. I see you guys are getting quite a following because of this. Great Job!
see now!!!
Great work guys
Like always thank you
(for home application) if we use an active subwoofer will it still draw power from the amplifier and still have to formulated first or just plug it in into a pairs of the socket (back L & R maybe) since it already have it own power source??
Man that was a super clean install plan on doing the same type set up in my avalanche just curious on how wire my factory speakers to the amp i see all the new wires from the amp to the radio but does it all just wire in the factory harness like a y harness kind of confused
Isn't the new amp location covering the floor air outlets? Extra heat blowing unto amp.
Dean and Fernando's attention to detail is 2nd ta none! Like button smashed!
You guys gave me an idea I like how you guys ran the cables straight to the harness instead of running Brand New speaker cable from the speaker
Another great video guys. Thanks for keeping me entertained/informed. Love the music btw!
Brian Jewell glad you like the the video and the music. Wanted to try something new
What did you use to do the speaker phase test with?, I need one of those....
The amp plate under the seat cool as hell. Great install fellas and hoping to come down that way soon for my new truck build. Keep up the great videos 👍✌️
JustEnufCustoms thank you👍🏻
How did you run the speaker wire from the amp to all the interior speakers?
How do I use the Stinger Speed Wire with my soon to be installed Maestro / DMX7704s / Excelon 5-channel amp without cutting the factory harness? It's going in a non-amplified factory 2015 RAM 2500 Cummins Turbo Diesel Crew Cab.
Are there any pros/cons to placing the amp drivers side vs passenger side?
This guy's work so neat..
I have a sedan is it possible to run the door speakers to an amp aswell as a sub???
I have a 5 channel but Do you also tune audison bit ten?
Can you guys show some tips for hooking 12” kicker es to 6 channel amp(Audison lrx 6.9)just sub no speakers they are hooked to my head unit Sony xplod .
Almost everything looked good, I just can't help thinking that some air ducts were blocked under there...🤔
Question is that a good location for the amp? The AC and heat come out from that vent!
Great videos and very helpful.
So I have a 2016 f150 and I recently bought a pair of type-R shallow 12's and all type-R speakers for front and back; including tweeters. Would this amp be good enough to handle all of that?
What speakers did they have. I'm looking into buying this amp along with alpine s-s65c keeping it all alpine.
How do u secure the connections to the power and ground?? With only the shrink wrap??
Such clean work, I love your videos!
That jingle at 6mins in lol great Video so much info
Jimmyc Chong thank you glad you liked it
Just wondering what size ferrules you used with the speed wire I can find any spec on the size of the speaker inputs thanks you guys have the best install videos
do you have any custom install on a infinity m35 video?
What a clean work good installation. We don't have this kind of material in India if it is available it will be too expensive.But still works with cheap material:)
Wow what a clean installation.
MSH3423 thank you very much
I have an 1972 Chevy Impala and was wondering for four 6x9 and two smaller 6'x in the front with two twetters what kind of amp would you recommend?
I’m going to come visit you guys in Clearwater. I hope I can afford you for a 911 save my 2014 4RUNNER and then do a great install on my son’s 2016 Tacoma SR5 Access cab. That 2nd install is for him as a surprise that we will deliver to him in the next couple of months. He’s active duty US Navy and hasn’t had his truck for several months. You guys really know what you are doing! Very impressed with your knowledge and skills in the car audio arena. See you soon, hope I can afford you and that you can save my already purchased equipment. Keep up the great on line shares. It’s so obvious you do stuff right. MB
What is the brand name of wiring you use to hook up the speakers to the amp?
Have a question for a 5 Chanel amp if the 4 speakers are @4ohms does the sub have to be 4 ohms or can the sub be @2 ohms ?
5:38 where do these wires go? and why you connected them to one single adapter?
Super clean!
Do you use twisted pair or single-ended RCAs on that Alpine line? I forget if they're differential input or not (even though I have two of them - a 4-channel and a monoblock sub amp, LOL).
So 5 channel is what i want? I want a sub and to amp 4 door speakers.. Hook the sub up but where the outputs for the speakers from the app just tap them into headunit harness
Signal to noise on this amp vs the HD900/5 JL Audio which one is better?
The amp has 3 sets of rca but does the radio unit have it too?
What are those attachments called that are on the end of the power wires? I'd like to order some for my install.
What do you need to have that 5.1 sorround sound in your car? I have a 02 rsx with a jvc kd avx77 and want to take advantage of that feature. What amp do I need and what else.
Clean install great video
I currently have a five channel amp installed in my vehicle my head unit has three sets of RCA inputs but the head unit I want to buy doesn’t have that many what can I do
I’m looking to have a 5 channel amp in my car. Did you install the five channel amp to stock speakers here?
@5:28. What wires are those to and from? They coming from the door speakers. Or did you go in from behind the head unit? Thank you.
Hey Dean and Fernando do you have review for a JBL gtr-104 4 channel amplifier
Why do you use both the amp speaker wires and amp rca cables together?
Hello. I have a question. I have 5ch amp and I have my speaks and small subwoofer to it. All connected but when music low or on pause. There is like a static sound. On front and rear speaker. Any idea what can cause it?
awesome install as always!
greenekturbo thank you
Did you have to remove the under seat vents?
When you drill into the bottom, how deep are you going? Are you also painting the bare metal to protect against rust? I want to mount underneath my seat and I am worried about that
Another awesome install...
John Furious thank you
Great information and camera work but that music was fricking brutal! Thanks edit: at 6:24 the music got a lot better.
Great video, interesting choice for background music.
Rob Meyer thanks. I wanted something new and different
I like the show. I cannot figure it out when my head unit makes a noise when I'm hitting the gas pedal
Were do u get the cable with the little wires inside? do u have a video about it? Also did you connect them to the radio harness? Or was it a amp bypass thing sorry if i seem lost
so you used the factory wires for the door speakers?
Is it ok to run power wire and RCA bundled?
Awesome job
Why would you run the remote wire with the soeaker wire?..... wont that cause interference or a low buzz in rhe sloeakers?
fantastic! I got the same amp and would've had you do the install if I lived in Florida ☹
alpinedb150 thank you
What model is it?
A video about speaker wire. gauge, tips and tricks also about the speed wire for speakers do you use it etc. thanks! keep up the good work!
they have vids on all of this.....search is your friend
Is it ok to run ur 9 speed wire with ur RCAs ?
What model of the Alpine 5 channel amplifiers is it?
I watch the whole video ☝️ real clean setup 👍keep the good work Gs😁👍
How about hot and cold air from ventilation? Isn’t affecting to amp ??
Love the video keep up the Gud work
And for a car with a factory radio that has no RCA, how would the 5-channel amp be installed? There would be 4 speakers and 1 sub.
Nice vidoe as always. I have 16 honda accord with 7speakers include an oem sub (one), want to add after market amp and subs. I am using a LOC for my amp but should I tap the wire to the rear speakers or the OEM sub woofer(one)? And i will not use the oem sub? Hope this makes sense...
Hey my friend where do you order that speaker harness? The white, purple, green, and grey you twist up with the drill? I’d love to be able to order that if possible.
First I'd like to say I love your videos and detailed information about the products you use. I've always been a mono sub setup with a maybe a 2 to 4 channel for mids and highs. I just bought a Kia amanti with a factory infinity system. It has 4 components (each door 6.5 and tweeter) a 8in sub in the rear deck. It has an underpowered 225 watt factory jbl I'm assuming it's 5 channel amp which is mounted in the left back of trunk. In nice out of the way area. I'm wanting to replace the 5 channel with more powerful one to run a better 8in sub and upgraded components. Also I want to add a mono block for my 2 12 jl w3's. Ultimately I'm going for a quality sound with the 8 providing quick mid range bass and the components doing there normal mid to high levels and of course my 12s doing there job. In my mind it sounds good but I'm not familiar with running 6 channels except in my house. I thought about a 4 channel and a smaller mono for the 8 plus a separate mono for the 12s (ran in series). I really would like to only run 2 amps. You have any ideas or videos perhaps on what I'm going for?