LS SWAPPING A C10 everything you need to know part 7
HTML-код
- Опубликовано: 21 окт 2024
- This video will wrap up this build I’ll show the exhaust setup full walk around and first test drive I appreciate all the positive feedback we got throughout this series of videos next squarebody we will be working on is getting a 6.2 ls stay tuned peace
DNA Motoring ZTL-25RAW 16 Pcs 2.5 Inches Mild Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit a.co/d/hYzaPmN
Pair of Single Chamber Performance Race Muffler 2.5" Center / Center Universal Muffler (2.5 Inch) a.co/d/ixzlkRZ
#lsswapped #squarebodyc10 #lsswap
This is probably one of the clearest, no boring explanations, on how everything works, swap videos I've seen! Good job, I subbed and look forward to more C10 vids.
I appreciate you thank you for your feedback
That road reminds me of when I was a kid visiting Eastern Washington tearing ass through those flat straight roads in the apple orchards.
I keep coming back and rewatching this series while doing my swap , good info
I appreciate it brotha
Makes me think I could actually do this. Thanks for the great series!
No problem thanks for tuning in
Wow. Great series. So clean and concise! Thanks so much!
Thank you I appreciate the feedback
Epic build. Thanks for the info. Im almost done with my 86 gmc classic c10 ls swap🤙🏽
Right on! Thank you brotha
Great work. Looking good. Doing a 6.0 LS soon on my 70. Your video helps all of us. God's Speed on your build.
Absolutely love this build series for doing a LS Swap😅. With everything that was used and installed makes it plug and play . I have a gen 2 67 C10 and would love to see you do a build series on the Gen 2s . Thanks again for the content 😅
Thanks brotha I picked up a 69 c10 for myself so that would be the next series of videos
You earned a new subscriber with this series! I like your no nonsense approach to the process. I appreciate your time and effort!
Thank I appreciate it
Great video Brother!
Appreciate it!
thank you man, Your videos helps me a lot , Great series keep it up
Thank you I appreciate your feedback
Great work. I have watched it many times. Where is your shop?
Thank you I appreciate it your feedback we are located in central California outside of Fresno
Yes sir he explained everything I was wondering about thanks
Glad the videos helped
Good job
Thank you
Great series! I have an 82 that I am planning to do the same thing with. Your videos answered a lot of my questions. Thank you!
Great series man. Very helpful.
Thank you I appreciate your feedback brotha
Looks and sounds good👍
Keep up the great work...always learning...
Thank you brotha
Wow nice bro. She is perfect!!!!!! Rhanx for the content bro.
No prob brotha thanks for checking it out
Killer build
nice..........great finish
Thank you brotha
Can't wait for the next one! That'll be great
Watch the whole series end to end. Will go back and do as I build mine. Thanks again from Norcal. 530
Right on I appreciate you brotha please let me know if you have any questions
creo que le boy a calar yo también es un excelente video , tengo una 1978 step side
Nice work right there!!!
Thank you
Nice work. lots of good info. Keep up the good work. thanks
I appreciate your feedback thank you
Nice build, very informative!
Thank you
Bad ass man I got an 85 c10 and recently put a good 350 with a 650 edelbrock carb. I’m really wanting to go this route instead. What does something like this cost?
Question are you going to put air conditioning? if so because i want to see how you trim the frame
Thanx for the content bro.
No problem brotha
Very nice videos, we're are you located?
Central ca near fresno
What wheels are those brother? This build was amazing!
Thank you brotha wheels are us mags rambler 20s
@@bacfab9259 thank you for the response I am starting my LS c10 build soon! Thank you for the inspiration!!
I really enjoy your video’s… how do I get a hold of you to inquire about some work I need done.
Good afternoon friend, very good job, I congratulate you. I saw a business card on the table, do you speak Spanish? And if you have a number where I can contact you, I have a 1985 Chevy to change to 5.3
Sorry if I missed it but what trans x member are you using and will it work with a manual?
Tejas steelworks transmission crossmember and motor mounts
What driveshaf did you use? I have a 73 with 5.3 4L60e and want to replace my stock driveshaft.
Factory drive shaft just balanced
Where did you get your harness from
I’m wanting the 5.3/4L80E swap my 1984 k20 if I go through warr preformance do I tell them what’s all done to the engine and tell them the transmission I’m running along with my tire size and gear ratio and send it to them and when I receive it back plug it in and run it it should run a drive correctly correct
So total money 💴 wise how much did this build cost you?
Parts wise I would say around 3k
We’re are you guys located?!?
I got an 88 I’m trying bag & LS swap
Central cali near fresno
Whose torque converter do you recommend? I've been told anything from PA to Precision to Edge to Roadrunner.
I’ll send you the part number tomorrow when I’m back at the shop
Great work,what brake switch are you using as im doing the same swap to a 64 c10 in the UK,any info would be great.
Brake switch is from a late 80s c10 k5 blazer or suburban they newer brake switches come with 4 terminals to control brake switch and tcc lockout
Great job. How many trucks are you doing and how long does a job like this takes you now? Definitely will keep watching. Thank you.
Typically 2 week turnaround I have one in line open availability after that
That’s amazing bro. Keep the videos coming.
Very nice! How much did you end up spending in parts?
Estimated price around 3000
What wires did you use for power of cab and 12v on and off with ignition I’m using a terminator x max
What year is your c10
Where are you located?
What header’s are you using?
2 bolt cast manifolds 2010 Camaro
It sounds good.
Where is your shop located?
What is the cost of a swap like this
Prices vary depending on engine reseal digital gauges stock gauges stock trans or upgraded
Bad ass ..
Thank you brotha
I have a 98 GMC Sierra. How much would it be to LS swap? Great job 👍
I can put a price together and get back to you do you have a donor for the swap?
@@bacfab9259 I don't have a donor. Can I get a price with donor and with out? If I decide on picking up a donor, what do you recommend I wanted with AC. Thanx bro.
I stay in OC CA.
Hello BACfab. Was wondering where your shop is. I can bring the GMC for a quote. Nice work
Bac_fab on Instagram
Hey bro , great series . I have a couple questions regarding the swap that I’m trying to figure out . Basically everything is covered on here but was wondering if there’s a email , Facebook or something where I could private message you for some advice . I’d appreciate it . TIA