That feels very wrong, using Loctite for something that should be de-mountable. If the mixer will fail and you need to replace it, you have to cut down the pipes and replace them completely. You should think about the next person coming after you..
@@fraserhoehle2256 is there any reason it the valve shouldn't be installed the other way up? Simply because of where my feeds come from, it would be easier to have cold+mix on the top, hot on the bottom.
"No leaks, no mess, no nothing" - *smears mess absolutely fucking everywhere*
What valves are you using here? Thanks for the video, helpful!
Do those pipe fitting req a washer or are they metal to metal? Thanks
Alright Fraser... thanks for the video... the tails that you used Loctite 577 were they tapered?.. or can you use parallel?
Hi thanks for this video, what did you use to connect the 15mm pipe to the valve, loctite sealant 577 or tape? thanks
Very neat pipework
I believe you have that mixer laying on its side. Should be installed vertically
No because it’s a side bare and it houses a hand held on it
That's a lot of loctite 🤣 just ¾ around the first few threads and it just covers all the way as you thread it in.
Won’t b leaking tho 😂😂😂
@@fraserhoehle2256 it'll last a thousand years. Gives peace of mind because if means behind the tiles after its just been done 🫣😱
That feels very wrong, using Loctite for something that should be de-mountable. If the mixer will fail and you need to replace it, you have to cut down the pipes and replace them completely. You should think about the next person coming after you..
@@razyellss It's Loctite 577 and medium strength, so you can disassemble
Fab video
Thanks bud
Why would they put the mix outlet on the bottom of a shower valve? Seems like an odd design choice.
Very odd mate but it’s quite cool the whole valve set up
@@fraserhoehle2256 I am trying to fit this shower valve and I honestly thought I was going mad until I found your video. Cheers.
@@awt hopefully it was helpful mate! That’s great it helped
@@fraserhoehle2256 is there any reason it the valve shouldn't be installed the other way up? Simply because of where my feeds come from, it would be easier to have cold+mix on the top, hot on the bottom.
@@awt hi mate, follow me on instagram if you can and I’ll message you
Why didn’t you just set the minimum and maximum depth, before screwing that noggin in?
This dummy thanks you! If you don't mind - please let me know the make of Shower Valve. Thenk ye uncoly! I'm not on Insta'.
Hi mate I can remember anymore haha. Maybe scudo
@@fraserhoehle2256 Still - Thanks for the reply though. I'll look at that brand.
Top video