You’re so clear in your explanation!!! You make what looks like gibberish make perfect sense!! Very important information made clear and what’s most important too! Thank you!!
Omg. I love you. Thank you!! It's like having to break legs to get any of this explained, but in less than 15 minutes you schooled the heck out of me. Thank you again. I so subscribed and am looking forward to watching all your videos😊
What pump do I need for a large rock with a one inch pipe coming up the center? Pump is going to be approximately 5 feet below the top of the rock. The rock is about 44 inches tall and 40 inches wide. I'm pretty sure the pipe is one inch or maybe 11/4 inch diameter.
This was super helpful and covered the points well. As I was reading various how to descriptions I was getting more and more unsure. I do have a question- I want to do a small fountain with 3 heads- do I then multiply my Max Head and Max Lift by the 3?
Hi Kate, if you want the pump to push 3x the amount of water, then yes you would have to increase by a multiple of 3. If you are using one tube and then splitting it into 3 heads, you should probably get something a little stronger than you need but it wouldn't need to be tripled.
Thank you for your guidance. Do you have any advice on how to manage the flow of the fountain.. I have a dolphin fountain and it seems to spill to water out completely instead of staying within the area of the water feature.
Yes in my pondless water feature video I do have a "diverter" valve connected that will allow you to change the flow of the water. I believe the product link is in that video description ruclips.net/video/BID1Sqdb--I/видео.html
Does anybody know why fountain pumps do not come with long enough pipe from bottom of the pond to come out of the water. My pond is 1 meter high but cannot find a fountain pump with over a meter pipe ?? I don't get it . Any help would be great. Excellent video.
@@PrettyPurpleDoor Hiya I just ended up buying some flofast pipe and made my extension as I needed it to stand up straight . With flex pipe I would not have got the same effect . Just read this post to myself and all seems very wrong lol 🤣 thanks for your reply Pretty Fred
I have just replaced my fountain pump with the same size one ( Little Giant 100 ) , this new pump shoots the water higher than the old pump - too high for fountain ( maybe new is stronger than the older one ? being new ). I have a two level fountain ( flower round shape ) . How may I tone down the pressure so it won't shoot so high . Thank you for any help
Check out my electric vs. solar fountain pump test: ruclips.net/video/w6fUa6dHUGc/видео.html
Thanks for your cogent explanation of pump usage 🏴 🎉
Clear diagrams too..
You’re so clear in your explanation!!! You make what looks like gibberish make perfect sense!! Very important information made clear and what’s most important too! Thank you!!
So nice to hear. I'm glad it was helpful!
Omg. I love you. Thank you!! It's like having to break legs to get any of this explained, but in less than 15 minutes you schooled the heck out of me. Thank you again. I so subscribed and am looking forward to watching all your videos😊
Haha you're awesome and I love you too for subscribing! Thank you 🙏🏻
Thanks so much! VERY HELPFUL! 😇
You saved me from buying the wrong pump!!
Great job deciphering all the manufacturers jargon!
Thank you for such a clear explanation!!
What pump do I need for a large rock with a one inch pipe coming up the center? Pump is going to be approximately 5 feet below the top of the rock. The rock is about 44 inches tall and 40 inches wide. I'm pretty sure the pipe is one inch or maybe 11/4 inch diameter.
Thank you for the information.
This is really helpful. Thankyou!
You're very welcome
perfect timing. thanks .
Question need some sort of tape to keep water spout from falling back into hole… what sort of tape would you recommend? Thank you
This was super helpful and covered the points well. As I was reading various how to descriptions I was getting more and more unsure.
I do have a question- I want to do a small fountain with 3 heads- do I then multiply my Max Head and Max Lift by the 3?
Hi Kate, if you want the pump to push 3x the amount of water, then yes you would have to increase by a multiple of 3. If you are using one tube and then splitting it into 3 heads, you should probably get something a little stronger than you need but it wouldn't need to be tripled.
Thank you for the thoughtful video.
Oh man... I'm going through this right now.
Indoor gardening features require precision. Hope it went well
Hi. Have to get one. How long Will thepump run on a fully charged battery?
Thanks
Thank you for your guidance. Do you have any advice on how to manage the flow of the fountain.. I have a dolphin fountain and it seems to spill to water out completely instead of staying within the area of the water feature.
Yes in my pondless water feature video I do have a "diverter" valve connected that will allow you to change the flow of the water. I believe the product link is in that video description ruclips.net/video/BID1Sqdb--I/видео.html
Thx!
Thanks
Does anybody know why fountain pumps do not come with long enough pipe from bottom of the pond to come out of the water. My pond is 1 meter high but cannot find a fountain pump with over a meter pipe ?? I don't get it . Any help would be great. Excellent video.
Isn't that so annoying??? Maybe the larger pumps have a longer pipe. I think just getting the flexible tubing is a good option (it's really cheap too)
@@PrettyPurpleDoor
Hiya
I just ended up buying some flofast pipe and made my extension as I needed it to stand up straight . With flex pipe I would not have got the same effect . Just read this post to myself and all seems very wrong lol 🤣 thanks for your reply Pretty
Fred
Really liked your video but I have a question. What does this mean max flow rate: 180 l/h mean?
Hi! Max flow is how much water volume can be pushed directly out from the pump. L/h is liters per hour.
I have just replaced my fountain pump with the same size one ( Little Giant 100 ) , this new pump shoots the water higher than the old pump - too high for fountain ( maybe new is stronger than the older one ? being new ). I have a two level fountain ( flower round shape ) . How may I tone down the pressure so it won't shoot so high . Thank you for any help
You can use a diverter. There's an explanation of what this is in the video and links to purchase in the description.