Excellent Gift Idea! Hardside Hydration www.hardsidehydration.com?sca_ref=2171802.kHXjO7TE7R 10% Off Your Purchase With Promo Code** gideon10 Thanks To This Videos Sponsor!
Yesss, I have been preaching about these Mavericks for a while now as I have both the full sized in 10V and this small one with Ultem scales and 3V steel, they are freaking laser beams with a proper applied edge on them and I personally have beaten the crap out of both with no failures so the toughness is plenty adequate the only thing that even shows they've been used is the black blade coating wear which I use my knives so that doesn't bother me one bit....
Also if you live where you'd benefit from a stainless instead then another great option for $80 at GPKnives is the Viper Knives Vox Lille 1 in Elmax steel...
I've used this in the 10v exclusive for field dressing deer for the last three years. Very nimble and capable. The 10v has held up nicely with excellent edge retention.
I bought the 3V PEI handle version in November and I have carried it every day since. It is a little small, but my hands are in the medium to small size. The only issue i had was that sharp edge by the finger choil. If you move your index finger up and down slightly out of that choil, it will cut you. A little file work fixes that. I took that tech lock off and made a leather strap with snaps so that I can carry it cross draw horizontal on my belt. It hasn't left that belt since i bought it. The mini harpoon is smaller than my Esee Izula, which is what the Kizer replaced for daily carry. I haven't had any other issues with mine and I'm happy with spending 60 dollars for it. I think it's a bargain. 👍
Im not a small fixed blade guy , the last 3" fixed blade I ever bought was my Becker Escobar with 1095 Cro-Van steel and that was about 10yrs ago , I got a little Kydex sheath for it last year , I love that little blade , it does everything I need it to do so I really don't need anything else..... 👍 🖖
I just got the version with PEI handle. Super grippy, has a carbon fiber look on the sheathe, but same belt attachment. Love the way it feels in hand and excited to put it through the paces!
I can say that the harpoon in 3v is done pretty dang well but you don't want the one done in 10v I've had three of them and everyone of them had bad heat treats. CPM 10v is my single fav steel and I have a ton of 10v and know how it sharpens and performs the 10v on those harpoons is done terrible edge lasting less than that of 154cm and having crazy gummy burrs that will not refine down and break loose. The 3v is done great tho!
I had one and it was an awesome EDC. I had swapped the tech lock for an esee izula belt clip I had laying around. Made for a sick sheath. The value for this one is crazy for what it is! 👍🏼 Thanks for the content Aaron 💯
I have the full size in D2 and black micarta. I love it. One thing i have an issue with. In a conventional grip, the back end of the blade is pretty sharp and level with your finger. In a stabbing motion you can get cut....
I have the Ultem or PEI handle version of the Mini Harpoon. I’m pleased with the knife and the sheath. I put the 3.3 inch clip on the sheath which works great!
I have the full size Harpoon and like it, but the back corner of the blade next to your index finger is a little sketchy to me. Already cut myself slightly one time, even being pretty darn careful. I think the mini would be even worse for me.
I have the mini, and that's exactly what happened to me when I moved my index finger up slightly and then back down. It gave me a nice little razor cut nick. I have small to medium-sized hands. Large hands would get cut without moving much. A little file work takes care of that edge. I love that knife. Super sharp, and I barely notice it carrying cross draw horizontal.
@@EvilTwinRC51 I rounded the tip with a dremel tool. the tip is really fine and pretty easy to modify. It resembles the tip of a spyderco endula some what, but more rounded. Its 3V but that tip is too fine for my liking.
I thought I was done with buying sub 3" fixed blades, but this might change that. $60 for 3V is a solid deal, and I really like the blade shape. Only showing the PEI/coated blade version on Amazon at the moment, so maybe if this version comes back around Ill have to jump on it.
When I wear a fake or knockoff of kislux , I feel proud knowing that I am not spending unnecessary money and I can look good while proudly supporting my family. As for the owners of designer brands, they have it all. There is no need to support them.
I bought 3V with the Ultum handle because it looked good with the black blade. I don't carry it when hitting outdoors, it's super thin, I am worried about the tip, and if the handle shatters I'm screwed. BladeHQ had pictures of it with a kydex sheath, but it was sent with a cheap leather one for up and down belt carry. Blade HQ couldn't do anything except offer a refund. I got ahold of kIzer and they sent the Kydex sheath for the cost of shipping. Now it's my around town edc. My outdoors knife I rock the White river FC3.5 pro in magnacut though I wanted the OG s35vn version because it's one of my favorite steels. Getting used to magnacut though
Amazon has flagged message that this product is frequently returned. I’ll stick with my White River M1 backpacker in s35 vn. First time I’ve disagreed with one of your choices.
Because the 3v is very spotty if you get a good one then it's a super bargain but the odds of getting a poor performer is pretty high this is somewhat true with the 3v version but especially true with the 10v version.
I have the 10v version of this knife. I like it so much i thought of buy the 3v ultem version. I feel much more justified for changing out the clip after this video
I dig the 3v with burlap that you have in the video. Too bad they are all sold out and were Amazon exclusives, which means they probably are not going to make any more of them like that. They have a 3v with PEI handle version and a blacked blade but I'm not very fond of that handle. The others are all in D2 or 10v (also mostly sold out). Oh well, looks like I'll be skipping this one then. :/ I would probably make a leather strap and bolt it on with some spacers to scout carry this one if I did get it.
G'day Aaron, cant say I've ever seen 3V this cheap, dig the harpoon too. Mind you there aint much of it in the handle, reckon I'd go with a folder at this point. Cheers Duke.
I'd love to see your thoughts on the QSP canary fixed blade. Got it on sale just for the heck of it and it's now become my primary fixed blade. The sheath is similar to this kizer, perfect kydex, pretty bad belt clip. But luckily I found a drop loop aftermarket attachment and it's perfect!
How about a standard Harpoon? All these knife makers keep offering a mini version of an existing knife. How about an XL version! I have 2xl hands, I can’t use a mini.
I was wondering if you could share your thoughts on how this Kizer knife compares to the White River M1 Pro in terms of ergonomics. Are there noticeable differences in handle comfort, grip security, or general usability for extended tasks?
LV bags are heavily copied, and small cute bags with funny handles are not practical everyday bags, the kislux bag would be much more practical. Thanks again for the informative video.
Got one aboit a week ago. Wish i would got the version you got instead of the pei handle and carbon sheath. Love it so far and the blade shape and size are what sold it to me. What ulti clip did you put on yours?
For the most part avoid the 3v and 10v knives that Kizer did the 10v is Terrible and the 3v is spotty if you get a good one it's a great deal but the odds of getting one with a poor heat treat are really high on the 10v releases and decently high on the 3v. With that said my 3v poon is a solid performer but I've had 3 other 3v models from them and those 3 all had fairly poor heat treats so I just stay away now. If it's not n690 or 154cm from them I don't buy it as I know they have those two ingot steels pretty dialed in.
@@Edcreviewer makes sense, I have litteraly made better shanks from spring steel as a child lol.... I would be surprized if they have ever had shipment from crucible.....
$60 is not a small amount of money for a tiny knife We need to stop saying its ok to have a subpar product just because its cheap, what we buy should be 100% quality, when we say its ok, companies will continue to halfass it
I have both the full size and mini and they are both outstanding knives. There is nothing subpar about then. It goes toe to toe with my MKC mini Speedgoat 2.0
Funny i bought a JEABROTHER knife $29 14c28n. Amazing knife very slicy. Or my other knife i really love watchman we222 14c28n i believe it was $29 as well. I don't believe anyone needs to spend ridiculous money to get a great knife.
Excellent Gift Idea! Hardside Hydration www.hardsidehydration.com?sca_ref=2171802.kHXjO7TE7R
10% Off Your Purchase With Promo Code** gideon10
Thanks To This Videos Sponsor!
Yesss, I have been preaching about these Mavericks for a while now as I have both the full sized in 10V and this small one with Ultem scales and 3V steel, they are freaking laser beams with a proper applied edge on them and I personally have beaten the crap out of both with no failures so the toughness is plenty adequate the only thing that even shows they've been used is the black blade coating wear which I use my knives so that doesn't bother me one bit....
Also if you live where you'd benefit from a stainless instead then another great option for $80 at GPKnives is the Viper Knives Vox Lille 1 in Elmax steel...
I've used this in the 10v exclusive for field dressing deer for the last three years. Very nimble and capable. The 10v has held up nicely with excellent edge retention.
I bought the 3V PEI handle version in November and I have carried it every day since. It is a little small, but my hands are in the medium to small size. The only issue i had was that sharp edge by the finger choil. If you move your index finger up and down slightly out of that choil, it will cut you. A little file work fixes that. I took that tech lock off and made a leather strap with snaps so that I can carry it cross draw horizontal on my belt. It hasn't left that belt since i bought it. The mini harpoon is smaller than my Esee Izula, which is what the Kizer replaced for daily carry. I haven't had any other issues with mine and I'm happy with spending 60 dollars for it. I think it's a bargain. 👍
Im not a small fixed blade guy , the last 3" fixed blade I ever bought was my Becker Escobar with 1095 Cro-Van steel and that was about 10yrs ago , I got a little Kydex sheath for it last year , I love that little blade , it does everything I need it to do so I really don't need anything else..... 👍 🖖
I EDC that bad boy all the time. One of my fave knives.
This Kizer is definitely on the list though
I just got the version with PEI handle. Super grippy, has a carbon fiber look on the sheathe, but same belt attachment. Love the way it feels in hand and excited to put it through the paces!
best affordable 3v mini fixed! I find this micarta version is now available on Amazon and I pull the trigger!
I can say that the harpoon in 3v is done pretty dang well but you don't want the one done in 10v I've had three of them and everyone of them had bad heat treats. CPM 10v is my single fav steel and I have a ton of 10v and know how it sharpens and performs the 10v on those harpoons is done terrible edge lasting less than that of 154cm and having crazy gummy burrs that will not refine down and break loose. The 3v is done great tho!
I had one and it was an awesome EDC. I had swapped the tech lock for an esee izula belt clip I had laying around. Made for a sick sheath. The value for this one is crazy for what it is! 👍🏼
Thanks for the content Aaron 💯
Great tip!
And the Smolt! I’ve been EDC’ing mine and I love it!
Great video, the quality of your review are getting better and better. I enjoy them, you cover all the bases. Thank you- Steve
Great to hear! Thanks so much
Hi Erin, try Kizer Smolt, its fantastic small knife in CPM-3V, very portable and capable for EDC+ knife.
I have the full size in D2 and black micarta. I love it. One thing i have an issue with. In a conventional grip, the back end of the blade is pretty sharp and level with your finger. In a stabbing motion you can get cut....
I have the Ultem or PEI handle version of the Mini Harpoon.
I’m pleased with the knife and the sheath. I put the 3.3 inch clip on the sheath which works great!
Welcome to the party, I've used this knives for years last set I bought was 10V.
I have the full size Harpoon and like it, but the back corner of the blade next to your index finger is a little sketchy to me. Already cut myself slightly one time, even being pretty darn careful. I think the mini would be even worse for me.
I have the same one. I too had the same concern and knocked the very end of the edge off. No more worries.
@@EvilTwinRC51 Exactly what I did, it really helps it. I also modified the blade tip. Turned it into a sheepsfoot style blade.
@@joshua-s I’d like to see that! How’d you do it?
I have the mini, and that's exactly what happened to me when I moved my index finger up slightly and then back down. It gave me a nice little razor cut nick. I have small to medium-sized hands. Large hands would get cut without moving much. A little file work takes care of that edge. I love that knife. Super sharp, and I barely notice it carrying cross draw horizontal.
@@EvilTwinRC51 I rounded the tip with a dremel tool. the tip is really fine and pretty easy to modify. It resembles the tip of a spyderco endula some what, but more rounded. Its 3V but that tip is too fine for my liking.
The D2 version is my favorite edc fixed blade. I did change the handle contours.
I thought I was done with buying sub 3" fixed blades, but this might change that. $60 for 3V is a solid deal, and I really like the blade shape. Only showing the PEI/coated blade version on Amazon at the moment, so maybe if this version comes back around Ill have to jump on it.
When I wear a fake or knockoff of kislux , I feel proud knowing that I am not spending unnecessary money and I can look good while proudly supporting my family. As for the owners of designer brands, they have it all. There is no need to support them.
I bought 3V with the Ultum handle because it looked good with the black blade. I don't carry it when hitting outdoors, it's super thin, I am worried about the tip, and if the handle shatters I'm screwed. BladeHQ had pictures of it with a kydex sheath, but it was sent with a cheap leather one for up and down belt carry. Blade HQ couldn't do anything except offer a refund. I got ahold of kIzer and they sent the Kydex sheath for the cost of shipping. Now it's my around town edc. My outdoors knife I rock the White river FC3.5 pro in magnacut though I wanted the OG s35vn version because it's one of my favorite steels. Getting used to magnacut though
Own it and love it and then I got the Kizer smolt 3v $60 ish, way better not at slicey good luck finding that one also!
I bought the same model and handle combo it's good but a bit too small for me
White river for the win
The full size Harpoon is already small in my hands. 😢
David C Anderson? From knife center? 😂
Amazon has flagged message that this product is frequently returned. I’ll stick with my White River M1 backpacker in s35 vn. First time I’ve disagreed with one of your choices.
Right on! I haven’t had an issue yet
That's why I passed on this also, a lot of bad reviews.
I also own the White River M1. It’s an outstanding EDC and serves as the perfect backup to my larger knife when I’m out in the field.
Because the 3v is very spotty if you get a good one then it's a super bargain but the odds of getting a poor performer is pretty high this is somewhat true with the 3v version but especially true with the 10v version.
I will stick with my marttiini Aapa
I have the 10v version of this knife. I like it so much i thought of buy the 3v ultem version. I feel much more justified for changing out the clip after this video
I dig the 3v with burlap that you have in the video. Too bad they are all sold out and were Amazon exclusives, which means they probably are not going to make any more of them like that. They have a 3v with PEI handle version and a blacked blade but I'm not very fond of that handle. The others are all in D2 or 10v (also mostly sold out). Oh well, looks like I'll be skipping this one then. :/
I would probably make a leather strap and bolt it on with some spacers to scout carry this one if I did get it.
G'day Aaron, cant say I've ever seen 3V this cheap, dig the harpoon too. Mind you there aint much of it in the handle, reckon I'd go with a folder at this point. Cheers Duke.
cant wait till they make the Hare in 3V
That would be sweet!
I'd love to see your thoughts on the QSP canary fixed blade. Got it on sale just for the heck of it and it's now become my primary fixed blade. The sheath is similar to this kizer, perfect kydex, pretty bad belt clip. But luckily I found a drop loop aftermarket attachment and it's perfect!
Howdy! Really like mine in 3v! Thanks
How about a standard Harpoon? All these knife makers keep offering a mini version of an existing knife. How about an XL version! I have 2xl hands, I can’t use a mini.
I literally brought the last 3V from Amazon three days ago. It showed as sold out right after i bought it.
Awesome 👏!
I was wondering if you could share your thoughts on how this Kizer knife compares to the White River M1 Pro in terms of ergonomics. Are there noticeable differences in handle comfort, grip security, or general usability for extended tasks?
Checkout the competition part of the video
@@gideonstactical I don't see where you mentioned the White River in this video.
This knife is sold out (w/ the burlap micarta) and not available.
Yeah, they go fast. I’m sure they’ll be back in stock soon.
Got mine with the pei handle👍
I put a ulticlip on it and pocket carry it. It’s so light I don’t know it’s there. The the belt attachment that comes with it is trash.
The kizer Cabox is decent too..
You done me again I just rush ordered this perfect EDC blade.
You're gonna love it!
Waiting for this same Harpoon!! 😂
I looked at this one ,but decided on the kizer hare instead 😏
Where did you find it with those scales??
Amazon, they must have sold out already. I’m pretty popular so I’m sure they’ll be back in stock soon.
@gideonstactical Ah. Appreciate it man. Hope you and your family have a blessed day.
Where did you buy the burlap version? Links in description is for other variants.
I bought it on Amazon. Amazon must be sold out. These blades are pretty popular so I’m sure it’ll be back in stock soon.
@ burlap back in stock just ordered 🤙 thanks for the awesome videos
Very good knive yes .
Unrelated, but I’m curious if you’ll be putting out a video on the Top’s Dragonfly. I remember you teasing it a few times in the past.
I actually let that one go a while back.
@@gideonstactical Ah, okay. I take it wasn’t anything special then.
This may well replace my izula 2
not a blade Shape I care for, but I'm sure it has it's utilities
No burlap micrata with 3V on Amazon
That’s where I bought mine from a few weeks back. Must’ve sold out already. These are pretty popular so I’m sure they’ll be back in stock soon.
Buckley is Goat.!
LV bags are heavily copied, and small cute bags with funny handles are not practical everyday bags, the kislux bag would be much more practical. Thanks again for the informative video.
This is a great video! Thank you so much here kislux for making my budget look more reasonable.
Got one aboit a week ago. Wish i would got the version you got instead of the pei handle and carbon sheath. Love it so far and the blade shape and size are what sold it to me. What ulti clip did you put on yours?
Dammit this was in my Amazon list and now I know for sure it's gonna be sold out 😂😂 hopefully they restock in a month or two gg
Hahah!
It's still available.
Sweet knife ... Where can I get tht hat with your logo ?
Working on it!
@@gideonstactical sweet good deal
Thank you! ..... you just spent more of my money. Darn it all! {LOL!}
This is just another time a company makes another useless mini version of and excellent design when a larger version was the way to go.
Such bad experiences with their heat treat, i wouldnt pay 20
It’s not a ridiculous price if it’s made in China. If it makes you happy, great. Thx
Is that a knife for ants?
my 3v kizer towzer k is the biggest POS ever because the steel seems to be completely trash......
For the most part avoid the 3v and 10v knives that Kizer did the 10v is Terrible and the 3v is spotty if you get a good one it's a great deal but the odds of getting one with a poor heat treat are really high on the 10v releases and decently high on the 3v. With that said my 3v poon is a solid performer but I've had 3 other 3v models from them and those 3 all had fairly poor heat treats so I just stay away now. If it's not n690 or 154cm from them I don't buy it as I know they have those two ingot steels pretty dialed in.
Kizer is notorious for bad heat treats
@@Edcreviewer makes sense, I have litteraly made better shanks from spring steel as a child lol.... I would be surprized if they have ever had shipment from crucible.....
But they’re all over $60 and sold out 😢
the Amazon link has the 3v version at $58usd
Amazon link
Amazon won’t deliver even legal knives to where I live it’s very odd
@@Cz82Negative. $69 on the link
Also green G10 is on sale for $39!
Split that wood bro. That lame wood shed is bad for your brand.
Good knife trash sheath
$60 is not a small amount of money for a tiny knife We need to stop saying its ok to have a subpar product just because its cheap, what we buy should be 100% quality, when we say its ok, companies will continue to halfass it
I like my marttiini knives i just bought myself the Aapa, cant wait!
"Subpar" lol
Yea the sheath broke straight up, thats not good for $60, the knife itself seems ok but i wouldnt buy it for more than $30
@@lonetrader1
$60 is a small amount for that size knife in 3V. It absolutely is.
I have both the full size and mini and they are both outstanding knives. There is nothing subpar about then. It goes toe to toe with my MKC mini Speedgoat 2.0
😴😴 🥱🥱
Overpriced
Wow! That’s a hot take for a $60 cpm-3v. What would be a good price for you?
Funny i bought a JEABROTHER knife $29 14c28n. Amazing knife very slicy.
Or my other knife i really love watchman we222 14c28n i believe it was $29 as well. I don't believe anyone needs to spend ridiculous money to get a great knife.