You can use it as a running light and brake light that blinks, I bought this exact setup but I used the harness plug and play and put the red wire with a blue wire and yellow with the red wire and ground to ground
Looks cold man. I swear I could see your breath a couple times. Light looks good. I’m glad you point out that’s it’s the exact same thing for a fraction of the price 👌
I actually filmed 2 of them already and didn't like how they came out because one It was getting dark and the other the camera was at a weird angle the whole video. Ill make one soon for sure!
How would you compare the quality of this kit to the subispeed ones? I’ve been wanting this for my car but I really can’t justify the price for the subispeed kits
The quality on this one is like 95%. I've had Zero issues with it, it still looks and works great. Subispeed has ones with cooler designs but I preferred the simple look of the OEM one and the OEM one on their site is MUCH more expensive than this one and I think its probably the same thing.
@@StreetInspired1 damn, it looks like the one on your car is sold out. Either way I'm probably gonna find a cheap one on ebay, and then use subispeed's $15 harness so I don't have to splice it. It's a lot easier than running an extension cord with my soldering gun out to my garage lol
@@slebano4244 The harness is definitely a good idea! Would make it much easier and easily reversible if you ever want to remove it or switch it out! I didn't think of doing that. Wish I would've but its a little late now. Lol
Here's the one I bought. Looks like the price went up $3 but still dirt cheap! www.ebay.com/itm/For-15-Up-Subaru-WRX-STi-CRYSTAL-RED-Rear-Fog-Light-Brake-Lamp-Mounting-Bracket-/322354889646?_trksid=p2349624.m46890.l49292
why go all the trouble buy the housing and the light bulb, you can buy one on eBay for 11-16 WRX STI XV F1 Style Red Lens Red LED Flasher 3rd Brake Light Lamp for $ 29.98
My buddy went through 3 of those already because individual leds were burning out. With this if the bulb goes out I don't have to replace the entire thing just the bulb.
one of the first mods i did las get the led f1 foglight with the flash .Subispeed is a big ripoff
You can use it as a running light and brake light that blinks, I bought this exact setup but I used the harness plug and play and put the red wire with a blue wire and yellow with the red wire and ground to ground
Which bulb did you use? I’d like to set mine up like that too.
Have it as a blinking brake light is not bad. More subtle when it’s not a running light.
Looks cold man. I swear I could see your breath a couple times. Light looks good. I’m glad you point out that’s it’s the exact same thing for a fraction of the price 👌
Definitely cold. I think it was 26°f when I filmed this lol. Ready for warmer weather for sure! And thank you!
@@StreetInspired1 dang!! working in the cold makes everything 5x harder too.
@Street Inspired Thanks for the video! How is the light holding up as of today?
So what number did you end up buying at Walmart for the bulb is it 1157?
If u want the red clamps to work everytime u need to squeeze it really hard with the pliers and that will make it cut through the wire.
Thats definitely a solution for the smaller wires however I've actually cut a few wires in half doing that lol
@@StreetInspired1 lol
I can’t decide on the wrx or sti. Such a hard decision
looks dope bro! also, would love if you can make a POV drive sometimes :D
I actually filmed 2 of them already and didn't like how they came out because one It was getting dark and the other the camera was at a weird angle the whole video. Ill make one soon for sure!
Theres a strobe module you can get. So you can run a regular led bulb which will strobe and also work as a running light
do you have a link?
find the hole... fist it through 🤔🤔🤔🤔😏😏😏😏🔥🔥🔥🔥🔥
hold my 🍺🍻🍺
Is there a way to have it as a non-running light, and just solid (non-strobe) brake light?
For sure! The way it came out of the box it can be wired to only work as a non strobe brake light only!
What overlays do you have on the tail lights?
They aren't overlays I actually painted them. Here's one of my 3 videos on it if you're interested ruclips.net/video/1uVMZGiKnZk/видео.html
How would you compare the quality of this kit to the subispeed ones? I’ve been wanting this for my car but I really can’t justify the price for the subispeed kits
The quality on this one is like 95%. I've had Zero issues with it, it still looks and works great. Subispeed has ones with cooler designs but I preferred the simple look of the OEM one and the OEM one on their site is MUCH more expensive than this one and I think its probably the same thing.
@@StreetInspired1 damn, it looks like the one on your car is sold out. Either way I'm probably gonna find a cheap one on ebay, and then use subispeed's $15 harness so I don't have to splice it. It's a lot easier than running an extension cord with my soldering gun out to my garage lol
@@slebano4244 The harness is definitely a good idea! Would make it much easier and easily reversible if you ever want to remove it or switch it out! I didn't think of doing that. Wish I would've but its a little late now. Lol
Do you have a link to the product?
Here's the one I bought. Looks like the price went up $3 but still dirt cheap!
www.ebay.com/itm/For-15-Up-Subaru-WRX-STi-CRYSTAL-RED-Rear-Fog-Light-Brake-Lamp-Mounting-Bracket-/322354889646?_trksid=p2349624.m46890.l49292
why go all the trouble buy the housing and the light bulb, you can buy one on eBay for 11-16 WRX STI XV F1 Style Red Lens Red LED Flasher 3rd Brake Light Lamp for $ 29.98
My buddy went through 3 of those already because individual leds were burning out. With this if the bulb goes out I don't have to replace the entire thing just the bulb.
I'm also not crazy about the individual leds look
Subispeed sucks don't they? They just resell the same Chinese crap for 10x the price.