1987 Foxbody Mustang | Idle issues Part 2 of 3
HTML-код
- Опубликовано: 13 сен 2024
- How many issues does this fox body have? I'm going to get it straightened out! Stick with me on this! Thanks for watching!!!
Parts:
Motorcraft MAP sensor: amzn.to/3PLc1qN
Full throttle body gasket kit: amzn.to/3ozDqzO
Idle Air Control valve gasket: amzn.to/3ozD1NO
Throttle body gasket (need 2): amzn.to/3z4uZ4I
EGR valve gasket: amzn.to/3J542lO
EGR valve position sensor: amzn.to/3Sh7ZYW
EGR Valve: amzn.to/3QeMDJZ
Throttle body cleaner: amzn.to/3S0k5Wd
Mass Air sensor cleaner: amzn.to/3J36FEK
Cleaning rags: amzn.to/3PGwj4b
Tools:
Smoke Tester: amzn.to/3QaR9ZN
FORD OBD1 code reader: amzn.to/3PVWLHQ
Wire repair kit: amzn.to/3znMWuX
Cheaper Volt meter: amzn.to/3oRGKXa
Fluke Volt meter: amzn.to/3SmJ9GX
Screw Driver Set: amzn.to/3aMoQls
Torque bit set: amzn.to/3z8lNxl
Affordable socket set: amzn.to/3v1NtBm
1/4" Ratchet: amzn.to/3PcnHm4
3/8" Ratchet: amzn.to/3uVWSdY
1/2" Ratchet: amzn.to/3obekaC
Website: selectyourtool...
Facebook: / selectyourtools. .
Instagram: / selectyourtools. .
Email: selectyourtoolshere@gmail.com...
Disclaimer: Links included in this description might be affiliated links. If you purchase a product with the links that I provided, I may receive a commission. There is no additional cost to you though! Thank you for supporting my channel so I can continue making free content and to help others!
I agree, all that you have done, should have corrected the problem. Especially with the broke wire. Please keep us informed if you find out anymore!
No kidding. I will figure it out or pull it and drop in a 351w! Lol
Probably the fuel pump and filter. My fox body was doing this one time it was needing a new filter and pump the next time the sparkplug was grounding out off my headers from a crack in the plug line cover wher the covering goes over the sparkplug. Once changed the wires and put them on right the problem went right away
I changed the fuel filter, didn’t do the pump. Had new plug wires and plugs too. Maybe the fuel pump was getting weak? I should’ve check rail pressure. Thanks for the info man!
Good work, you'll eventually find the culprit.
Thanks man! I’m determined to find it for sure!
Sweet ride!
Thanks man! Get that Godzilla swap done and join me on the road! Lol… well, I wouldn’t be able to keep up! Hahaha
Check the 10 pin connectors aka salt and pepper shaker plugs
Thanks man!
Pull that computer and check those capacitors about bet ya thats your problem.
I thought the same thing man! I pulled it, but the capacitors looked good. No swelling or leaking. I maybe upgrading to a new computer system before to long. I want to do that before I start building it. Thanks man!
I would pull that cold air off the throttle body and block it off then check for vacuum leaks
I ended up doing a smoke test.
These foxbodys always have some type of idle issue. Pain in the butt mines bogs down :/
I agree man! Fixing to do an engine swap and a Holley Termx computer upgrade. Hopefully I can get it to run great when I’m done!