You CAN Fix your sublimation mistakes with a heat gun!!
HTML-код
- Опубликовано: 28 сен 2024
- Using a heat gun to lighten the image on a sub tumbler so it can be sublimated again.
Use my links below if you need any materials I used in this video.
1800 watt dual temp Heat gun: amzn.to/3DJ9wA0
Your son is so adorable 🥰 ❤
@@ministertabathahopson2638 thank you so much!!🥰
Just jump to 3.00 if you want to miss all the pointless waffle about ovens and where to buy a heat gun. Three minutes before he actually does anything useful.
Oh, and save some time, skip to the end, it doesn't work.
The process does work, albeit not as good as cooking images off in an oven, however no method will completely burn a sublimated image off ( that I have found at least) and the pointless waffle is on all my videos, (so if u don’t like to hear me talk u should skip my videos entirely)I like to just aimlessly talk to those that will listen… lol!! 😂 thanks for watching and for your feedback!!
I have a heat gun but it's not very strong what is the minimum wattage for a heat gun
I am not sure the minimum wattage on heat guns, I am by no means an expert, I would say it’s got to be able to heat up to at least sublimation temp, so at least 365, I would say any of the 1600 or 1800 watt ones they sell on Amazon would work
@@TouchofClassCreations ok thanks mines probably not that strong.
🙋🏾♀️🙋🏾♀️
🙋🏻♂️🙋🏻♂️💪 hey friend!! thanks for the share!!!
@@TouchofClassCreations 🤜🏾🤛🏼❤️
What temperature in the oven? Do you have to use a convection oven?
In an oven I would cook at least at 365, in my oven I do at 400 degrees to burn the image off, and I do use a convection oven, usually about 40 min or so. Here is a link to a video I did using oven
STOP THROWING AWAY YOUR SUBLIMATED TUMBLER MISTAKES! How to Resublimate a tumbler #reuseoldtumblers
ruclips.net/video/76p8ntxaApU/видео.html
It would need to be way lighter
I know this is nothing to do with the video but can you tell me where you got that printer stand I need that! Thanks for making this video great info!
It came in a set with a matching desk from big lots a few years ago
How close are you holding that gun to tumbler?
Probably should hold 10-12 inches out, I might have been a little closer😜
We gotta be friends....I'm a BUCS fan too.... :)
Heck yeah!! Go Bucs!!! I feel another Super Bowl run this year!!!
Was there a lot of fumes?
It wasn’t too bad, although I still think cooking the image off in an oven is the easiest if u have a little oven or tumbler press available. If u are sensitive to fumes I would wear a mask or do in a well ventilated area still
Can I use a toaster oven just to bake off?
I am sure any oven for about 40-45 min at 400 will bake it off, just make sure u don’t cook in oven after, sublimation gasses can be toxic
Aww like father like son 😊 great video thanks for sharing
Thank you, and thank you for watching!!
What oven do you use?
I use the galaxy lopo tumbler press
Can I do this to a mug too??
Yes, this will also work for sublimation mugs
Will this work on a license plate as well?
I have only ever tried it on a tumbler, but I would guess it would work on pretty much any sublimation hard substrate as the gas would cook off at the activated temperature
Did you use kiw med or High heat
Hey there, I used high heat, thanks for watching!!
And how far from the cup
As u can see in the video I held it pretty close, maybe an inch or 2 away