its quite big for sure compare to the build surface. CR10 versions are alot smaller in that sense. I would hope they make an ender 6 with 300*300*400 build surface because its doable :)
Good afternoon let me tell you that I have a Creality ender 6 printer, and I also bought a laser head that I bought, I would like to know if you have any video on how to install the laser head and how to make it work. Thanks
Good to see you again Daniel! For bed adhesion, I found that a little gluestick applied to the bed, then diluted with a few cc of distilled water and spread around with a tissue works really well - the water evaporates leaving a thin even film behind. This printer would be a good 2nd machine, though with €106 shipping from CN I think I'll wait!
I got it from spain. Yeah it can be wise to wait intill its in stock. Adhesion My goal is to not have to do anything. And this new bed works ok with pla as Long as the area is big enough. The cr10 i added a mat and that One is Night and Day. Havent had a single Piece not sticking :)
I am thinking this is this one! I am torn between it and the (X-Max 3d) . We have V3 and a Raised 3D Pro2 at work which is not really worth the cost IMO but it will produce a nice finish using their filament.
If you compare with a printer that has moving table it would had taken much more space because of the size of the table and movement back and forward. You should see it as pros instead. I have this printer but i don't like the material quality and all wheels on this machine. When problem starts you will have much more work. They should had build with linear rails...it's noticeable that they build in a diffent way now and also more expensive machine dosen't use wheels as an solution
Hello, you mention something related to the USB cable that you say has to be removed, could you explain what has to be removed from the USB cable? How did you mount the Raspberry Pi? Greetings.
Yeah i figured that out :D Nowdays i wait till it cools down and they are totally loose. I do like this bed alot. Its sensitve for small parts but with big enough surface area it just rocks!
Thanks for another great video. I'd be interested in the software side of this - I see people do custom 18650 holders and all kinds of things, but have not seen how this is communicated to the printer or how one creates these things - some kind of 3D software studio? Is there a standard format shared by all 3D printers? etc. Thanks again!
Generally you use the stl format. And from that you use a software that converts to gcode that is something your printer understand. Ie 3d software -> stl File -> gcode software -> printer :)
I had ender 6 for 2 weeks and freezes in start up and can't figure it how to fix it now collecting dust at the moment waiting for technical support to call me.
@@DIYTechRepairs I don't any error at all, just about run the next print when I turn on the power it power up but just stuck in there. I install the latest firmware actually all the version of firmware but nothing works. All the filament I'd ordered in amazon received it today but printer not working....Am very disappointed!!
Check all the electronics conections , oh waot , thats is a wrong sd card , try another one , the card came in this priters are not the bed (its happend to me in an ender3, stop printing in the midle of an objetc, then cool down, no error, its was the sd card
@@noway8233 I got it fixed, connection of heater is loose because I installed the micro swiss might pull out during installation and the firmware got install was the BL touch so many error in my part. Like said had it for 2 weeks and this my first 3D printer.
Nice! I picked up an Ender 3 last year and love it. Mine has been running almost non-stop.
The Ender 3 is rock solid with some upgrades as a first printer thats for sure.
And the price for sure is nice!
Nice video, just got my Ender 6 together yesterday and it rocks right out of the box! I'll be watching for more of your Ender 6 videos.
Thanks.
After a long time Sir and it looks like great videos are on the way to come I hope :D
More to come!
Nice one Daniel, wow it's HUGE :-) Seems very quiet as well, especially when you're standing next to it and talking.
its quite big for sure compare to the build surface. CR10 versions are alot smaller in that sense. I would hope they make an ender 6 with 300*300*400 build surface because its doable :)
Those boxes look like Alexander chapels boxes! :D
Yeap. It is :) they are awesome
@@DIYTechRepairs beautiful!
Hello everyone, I will mount how to replace the PLA coils on the Ender 6 step by step.
Thank you sincerely, Johan.
Good afternoon let me tell you that I have a Creality ender 6 printer, and I also bought a laser head that I bought, I would like to know if you have any video on how to install the laser head and how to make it work. Thanks
Good to see you again Daniel!
For bed adhesion, I found that a little gluestick applied to the bed, then diluted with a few cc of distilled water and spread around with a tissue works really well - the water evaporates leaving a thin even film behind.
This printer would be a good 2nd machine, though with €106 shipping from CN I think I'll wait!
I got it from spain. Yeah it can be wise to wait intill its in stock. Adhesion My goal is to not have to do anything. And this new bed works ok with pla as Long as the area is big enough. The cr10 i added a mat and that One is Night and Day. Havent had a single Piece not sticking :)
To achieve a smoother film of glue prepare a gluestick solution, I use PRITT. And some gluestick brands are not water soluble like UHU.
I am thinking this is this one! I am torn between it and the (X-Max 3d) . We have V3 and a Raised 3D Pro2 at work which is not really worth the cost IMO but it will produce a nice finish using their filament.
If you compare with a printer that has moving table it would had taken much more space because of the size of the table and movement back and forward. You should see it as pros instead. I have this printer but i don't like the material quality and all wheels on this machine. When problem starts you will have much more work. They should had build with linear rails...it's noticeable that they build in a diffent way now and also more expensive machine dosen't use wheels as an solution
Hi bro I'm new to 3d printing does Ender 6 is a better printer or I can go for some other printer instead of Ender 6
Hello, you mention something related to the USB cable that you say has to be removed, could you explain what has to be removed from the USB cable?
How did you mount the Raspberry Pi?
Greetings.
The 5+v Wire cant be connected since its backfeeding
Hello everyone, can I install and use HP SmartStream 3d Build Manager software for Ender 6 3D printer?
Thank you sincerely, Johan.
Dont know what that is. Sorry
Dont remove the cat inmidiatly, just wait to coold down to normal ambient temp, the cat came out easyly
Yeah i figured that out :D Nowdays i wait till it cools down and they are totally loose. I do like this bed alot. Its sensitve for small parts but with big enough surface area it just rocks!
Thanks for another great video. I'd be interested in the software side of this - I see people do custom 18650 holders and all kinds of things, but have not seen how this is communicated to the printer or how one creates these things - some kind of 3D software studio? Is there a standard format shared by all 3D printers? etc. Thanks again!
Generally you use the stl format. And from that you use a software that converts to gcode that is something your printer understand. Ie 3d software -> stl File -> gcode software -> printer :)
I had ender 6 for 2 weeks and freezes in start up and can't figure it how to fix it now collecting dust at the moment waiting for technical support to call me.
Do you get an error when it happens? I think i have run through over 700 hours with mine already :)
@@DIYTechRepairs I don't any error at all, just about run the next print when I turn on the power it power up but just stuck in there. I install the latest firmware actually all the version of firmware but nothing works. All the filament I'd ordered in amazon received it today but printer not working....Am very disappointed!!
Check all the electronics conections , oh waot , thats is a wrong sd card , try another one , the card came in this priters are not the bed (its happend to me in an ender3, stop printing in the midle of an objetc, then cool down, no error, its was the sd card
@@noway8233 I got it fixed, connection of heater is loose because I installed the micro swiss might pull out during installation and the firmware got install was the BL touch so many error in my part. Like said had it for 2 weeks and this my first 3D printer.