Making A Circular Saw Sliding Guide | Homemade Sliding Saw Very Easy
HTML-код
- Опубликовано: 13 апр 2021
- Hello Everybody,
I would like to introduce how to make A Circular Saw Slide Guide For Workshop.
I hope you feel interested in my video.
Please like, share and subscribe my channel to see more videos.
Thank you so much!
Tado
#tado #circularsaw #slidingsaw
I really like the way you made your rails. Thanks for ideas to hold down the cut stock.
You are welcome!
Excellent!
Very simple and practical, not very expensive looking either.
Thank you so much!
Kreatif dan hasil sangat memuaskan
Salam sukses
Excelente video,muy claro,agradable de ver,sin palabras,gran maestro ,eficiente y practico,felicitaciones desde valdivia,chille
Thank you and welcome!
Morir en el intento o ver pasar a los que cruzaron el río, saludos y magnífico trabajo 👍🚓
Someone buy this man a chop saw!
Thank you!
the best idea ever thank you from slovenia
Many thanks for your compliment!!!
Again I got useful information to make a sliding saw.
I am from Russia, I translate through Google translator, so I apologize for the mistakes. Your idea is very great! Not only did you save my money, but I was ready to give it away, but did not know how to implement what you showed on the video. Thank you very much !
You are welcome! Let make it for you!
Я более бесполезной приблуды ещё не видал.
Торцовка с этим прекрасно справляется, на своей я спокойно распилю двумя пилами 680 мм.
А ещё быстрее распущу болгаркой с сильным диском по дереву.
This jig is really great and practical, I have to make one for myself, thanks for this interesting and important video
Square metal tube are not straight, mainly by the way they are produced and shipped. I did mine with a 50x30 mm tracks, but for the carriage guides I used 1x1x1/4 in extruded aluminum L shape with 6 hex bolts screwed to the metal tube so that I could adjust the straightness of the guides, The track saw I did is 2.20 meters long so I am able to cut MDF panels, and I also made Circular saw bed with fixtures to install a Router if I ever need to route something long. Just a tip !
planning to build a big cnc machine but im torn on the price for a steel round and the limitations of its sizes.. i just amazed at how he used square metal and bearings as his track and planning to adopt it instead of linear bearings.. with your tip may i see how you have done yours,, just to debate my ideas on what to use.. thank you
Well worth making - great idea and execution!!
Thank you so much!
Bom trabalho... Simples e objetivo..... Parabéns..... Abraço.
Thank you so much!
Идея отличная.Привет из Белоруссии.
Great ideas,,, thanks for sharing. New friend n suporter. Stay safe n connected
Thank you so much!
Crafts DIY..good working
Thank you!
Mantap Bosque,salam dari Indonesia 🇮🇩
Thank you so much!
Maestrooo...!!! Excelente video...Gracias desde Bs. As...Argentina...!!!
Thank you so much!
very cool build, kind of like an inverted table saw on a budget
Пока доску такими струбцинами прижмёшь забудешь, что птлить хотел :)
lol
Доступно в любом строймаге запчасти на такой станок купить можно. Молодец автор самое простое и доступное на всем ютьюбе конструкция
Thank you so much!
What wonderful work!! Congratulations on the perfection of the details!! You gained another subscriber!! Big hug from Brazil!!
De los 16 rodamientos que usas, te sobran 12 ...
Yo, hice un estribillo como ese.
Monté 4 rodamientos de nailon, sobre los carriles (como digo, igual que ese).
Los carriles llevan canaleta por la parte superior, aluminio, de tal suerte que se puede sacar todo el carro, en un segundo, con la sierra y dejar la base libre...
En cuanto a la Sierra, va sujeta con cuatro uñetas al carro; en 4 segundos se libera, con un jiro de las mismas.
La base del carro esta formada por una placa Alu de 3 mm de expesor; con lo cual, SOLO PERDEMOS 3 MM DE PROFUNDIDAD DE CORTE. (Utilizo una sierra Bosch. Me permita hacer cortes, una vez montada, de 53 mm).
Muy Buen Video.
*¡¡¡ BUEN TRABAJO !!!*
Un Cordial saludo.
Many thanks for your opinions!
¿Podrías mostrar tu guía por favor? Estoy pensando en hacer una pero no cuento con demasiados baleros.
@@fernandovelazquez1762 lo que menciona, es un riel, como el que usan en los closet de puertas corredizas, puedes comprar el sistema ya hecho en las ferreterías grandes tipo home depot. puedes hacerla inclusive con un par de rieles, sin ningún rodaje o balero
Me gustaría ver su sistema, a ver si lo puedo hacer, le agradecería mucho una guía o fotos
Se puede usar esos rodamientos en "W" que usan para cnc?
So many movements to make one cut?! This is a fiasco, bro!
Столько движений, чтобы сделать один пил?! Это фиаско, братан!
Excelente trabajo ,creo que voy a intentar hacerlo.
Thank you. You should make it!
This is brilliant, Im blown away
Thank you!
Отличная конструкция!!!
Thank you so much!
Fine job, easy and practical. May be one tip. Make knobs for fasten the wood … greetings from us in Holland 🌷🌷
Thank you so much!
wow, it's clear that using nut and wrench with bench clamp is much easier than using wooden knob for mechanistic 😅
I think 16 ball bearing and two square tubes is too complex and heavy pattern, but the idea was really deserved
otimo trabalho.
Slider looks nice.... The table clamping system is a bit primitive though... Clamping down a piece of wood with a wrench is slow not to mention a pain. What about large plastic knobs on the bolts?
Many thanks for your opinions!
Exactly or even small butterfly style nut would do the job
Циркулярный стол намного лучше👍
Yes, bro!
Gracias felicitaciones y siempre adelante
Thank you so much!
Very creative
Muy genial y práctico, solo ahí en las abrazaderas les hubieras puesto mariposa de ligar de tuercas
Show de bola 👏👏👏👏👏👏tamos juntos
Thank you!
Excellent idea and presentation. This design could easily be expanded to do full sheet (4' x 8') cutting as well for cabinet work. Kudos for the simple design!
many thanks for your suggestions!
@@TadoCreation Yes ! The only improvement I would maybe do (a little bit more complexes) is to have 4 ball baring rolling *FLAT* on each side of the square hollow tube, precisely for a lengthy full board cuts. I have a feeling that the *Flat* way is more stable and subject to *less* wear and tear / calibration. The *Flat* way also will not create channels on the tubes/axes.
@@TadoCreation can you help with the material name and size. I will create this , it looks sturdy enough to cut entire ply of 8*4 as wayne said.
Please provide the details
O melhor de todos👏👏👏
Thank you!
I keep admiring this video
Thank you so much!
@@TadoCreation They gave you thumbs down a little bit , because the equipment is cheap ! Hehe "They" think those axes - which are really sqare hollow tubes - are inaccurate . If you showed them how you tested the Tubes / axes with a Micrometer , they would have Thunbs You up to death. Very expensive No Rust round axes with like SBR25 for examples - are very accurate. But even there , the ball bearring tiny balls are heaving a "small game" (Your game / spill is LOWER than that, because you do not have ball bearings, and you can calibrate this "game" to a minimum). If you tested their accuracy , I surrely prefer your method, and NOT because it is cheap. Also only one of the Tubes / Axes / Rods have to be streight edge accurate *HORIZONTALLY* only in order for your setup To work like a charm, since it is so cheap then you can do a tool to cut up to a full board length with THICKER square tube . (If you want sbr50 and up it will cost you a fortune) Thanks for the VID again
Thanks for your video is a safest idea💪💪💪❤ More power to your Channel!🙏
Thank you so much!
Хороший стол. Полезное решение!👍👍👍
Many thanks!
👍👍👍
Awesome. Much respect
Thank you so much!
great idea
Thank you!
Отлично, осталось на зажимы поставить барашки..
Excelente trabalho, porém acho que seria menos trabalhoso se usa-se borboletas no lugar das porcas para fixar a peça que será cortada.
Всё бы ничего, если бы не эти зажимы. Если сотню досок отпилить надо - устанешь гайки крутить!
Haha~!
This is better than table and miter saw
Yes, sure!
Sıkıştırma vidalarını kelebek yapmanız daha faydalı olurdu. Good working.
Many thanks for your advise.
Sierra muy compleja para el manejo e inusual
Mantap.....
Thank you!
На деньги, потраченные на это устройство, можно торцовочную пилу купить неплохую.
Muy buena la idea, faltaría la protección y un embudo para la salida del alimento procesado el que podríamos producir de diferentes dimensiones. Pero muy bien felicitaciones.
That is awesome 😎👍🤜🤛💥
Thanks!
Bonjour, excellente idée et prestation, dommage que tu ne donnes aucune explication, précision sur les dimensions /mesures ni sur les matériaux utilisés. Tu devrais fournir un document PDF, peux-tu me l’envoyer ? Merci et continue, j’ai apprécié ! 👍🏻
Thank you so much! But I don't have drawing to share. Sorry!
very very good
Amazing to what lengths people go to avoid learning to make straight freehand cuts. Nice engineering, though.
Good amazing 👌👌👌👌👌🌹🌹🙏🙏
Thank you!
Good idea. Only thing i would do is to get wing nuts for the clamps.
Thanks!
Como fazer sopraďđ
Good job my friend‘👍
Thanks!
Wish I saw this before throwing out the old rollers from my garage door.
можно вместо пилы поставить фрезер и делать слэбы)))
Nice Job soldier
Thanks!
Wow this amazing bro ..
Thank you!
Very easy for someone with a welder yes
wszystko naprawdę super tylko jak widzę gościa, który za każdym razem zakręca te uchwyty to mnie rozwala na łopatki typ 3x dłużej tylko zakręca i odkręca te śrubki niż tnie Gdyby tak miał uciąć 5000 sztuk zeszło by mu cały miesiąc :))))))
espetacular Parabens
good👍👍 ideas👍👍
Thank you!
modern wood saw table
Thank you!
Wow wow
Thanks!
Как ты узнал растояние между квадратом и роликами?-напиши пожалуйста сколько мм между шпильками на которые поставил ролики.Удачных тебе новых проектов.Здоровья и любви!!!...😊
kwantilio tretova diserio umata.
excellent idea but you can do easy by using wing nut instead of open wrench
Muito bacana parabéns
Thank you!
New Subscriber. Keep the videos coming
Thank you so much!
@@TadoCreation you're welcome
Awesome..
Thank you!
Good 👍
Thanks!
Хорошая работа. Такой станок можно использовать для резки плитки из керамогранита, если немного доработать. Кстати, что за сварочный аппарат 3мин.18 секю?
You can refer this one: bit.ly/3zRuNUY
Very easy :-)
Yes, sir!
ใช้ล้อร่องฉากน่าจะสะดวกดีกว่าครับ
Many thanks for your suggestions!
Ideia maravilhosa
Thank you!
Дерево зинковать , сверло обратно крутить надо, так легче контролировать глубину и дерево прессуется под саморез
Many thanks for your advises!
@@TadoCreation jg
Klllly
Да вообще, как из дерева можно лепить несущие детали... Уж картон тогда можно забацать
❤❤❤❤❤❤
Que exasperante ajustar los pernos con una llave....no hay otro sistema de sostenerlo.??
Yes, sir. Please share me another way to tighten bolt. Thank you!
Would you please give me a list of all the hardware and materials you used to make this along with all your cut measurements. I would really like to make myself one. It's really the best one I've seen.
Thank you so much! And please see detail materials in video help me.
What do you mean by "video help me"? Where do I find that option at because I can't find it anywhere?
great!
Thanks!
Cool but a lot of work for something you can make with 2 straight pieces of wood. Screw down a smaller guide onto a piece of larger wood, put the circular saw fence and cut the wood, thats it. Now you have a guide as small or long as you want to make it and portable.
Many thanks for your advice!
Your idea also works, but it is not practical for small pieces !! otherwise there is the plunge saw, sled for table saw, miter saw....
The lower bearrings lose in material thickness..because they are lower than the hight of the circular base...so that makes this jig to lose in material thickness you are able to cut. If the lower bearings will be at least at the same hight with the circular base...then you gain the exact material thickness you can cut with it.. as the blade alows you. Other than that.. is a simple jig .. to do your job. Cheers.
Very good
Thanks!
Подшипники будут работать на перекос! Надо повернуть профтрубу на 45 градусов
Amazing
Thanks!
👍👍👍👍👍
Вместо гаек барашки взять и вообще огонь будет!
Use a wing nut with clamps will speed up clamping.
I don't see the profit against a radial saw.
But it is a idea and nice work.
Many thanks for your opinion!
What is Nice meant to you ?
@@sotheateschea8407 Why is it importend to you? You did't make it.
@@billydewillie297 is it important if I made it ?
@@sotheateschea8407 No, it is not, but your question is also not important.
Pke baut kuping mas biar gampang ngencenginnya
yes, bro!
My complements, that a very good idea. Could have save meself a fortune on raidal arm saw
Many thanks for your suggestions!
Why you think, that this id cheaper then a radial saw. Don't meantion the different in time you need with this system.
What I meant was I could have used this idea, as a starting point a radial arm saw. There's a similar example in a workshop I used to work in
👍👍👍👍👍🌹🌹🌹🌹
Es una herramienta completamente inpractica.
Please tell me why?
Show 👏
Thanks!
Often I run into situations where a radial arm saw is needed. This is one of those "why didn't I think of that" projects.