The BEST 3D printer for BEGINNERS?! (ft. AnkerMake M5C)

The AnkerMake M5C is available now and you can check out the full information on the website - where at the time of writing this there is a £50 off deal in the UK - www.ankermake.com/eu-en/m5c
Thank you for watching and don't forget to subscribe!
We took the chance to test out the AnkerMake M5C because I use a lot of Anker products anyway and have always been impressed, but mainly because the App interface and quality for the price seemed too good to be true.
It didn’t disappoint, and if you are thinking of getting into 3D printing as a beginner or need a 3D printer to complement your current crafting business, then for the build quality, ease of use and overall print quality we’ve been getting I would certainly consider the AnkerMake M5C.
As we mentioned in the video, AnkerMake did send us this printer, but they did not pay us to review it and the opinions we give in the video are our genuine thoughts.
The AnkerMake M5C is available for $399 in the U.S., £399 in the UK, €449 in the EU and CA$699 in the CA.
For more Play Conveyor videos and 3D models you can find us AND our designs below ⬇️
LATEST DOWNLOADS & COMMERCIAL LICENSE:
💾 / playconveyor
Print More. Play More.
#ankermake #ankermakem5c #3dprinting #3dprint #3dprintsbeginner

[@OfficialGtag_Monke]

I love your vids keep it up❤

[@playconveyor]

Thanks!!! 🙌

[@GreenBlueWalkthrough]

Honestly even with out a screen it looks really good for the money.

[@realgalactic]

this is cool, but it would be nice to have an sd card slot on the printer. Great video as always!

[@playconveyor]

Yeah I get that… they’ve chosen to move exclusively to future tech which is a bold move (I do admire them for it)… managed to get hold of a Usbc for less than £10 so not too bad I guess!
Thanks for the comment, really nice to hear! (We probably need to get our butts into gear with posting more long form 😅)

[@Jakeypoo-di6hy]

@@playconveyor- - just wondering and curious
After I got Ender 3 , I was playing . the sd card fell into 3D Printing it was on accident. I put butter knife trying to get sd card unfortunately no lucky - I did take the card from open the box apart then put together.
After that - blue screen is saying No TF CARD
What should I do next ?

[@chelagalea2771]

love the vids
especialy the shorts

[@playconveyor]

Thanks!! Printer reviews are on hold now… time for some fun long form videos like the shorts too 😃

[@GreenBlueWalkthrough]

5:39 What if the app isn't updated and won't work in the future? Like simply having physical buttons that do basic stuff would solve that problem.

[@adamb6024]

I think I have found my first 3D printer

[@theanomynusguy]

we need this vs the new bambu labs printer now
im kinda hoping to get my first printer soon and need some suggestions

[@playconveyor]

Yeah we’d love to put this up against the A1… although this is guna be hard to beat! It’s also not cantilever like the A1 which I’m definitely a bit sceptical about after getting burnt with my Prusa Mini

[@Stop_block]

Hey man just wondering can you clean the base plate with dishsoap and warm water ?

[@Asianatandoff2]

Uff great printer but i alerady got another one easythreed k7 mini 3d printer

[@playconveyor]

Yeah it’s great! Ah, we tested out the EasyThreed X1 a while back and were so impressed with it for the price!

[@stephandevriesere3667]

You CAN print directly from your computer with the AnkerMake slicer, done it ceveral times. If you can not print from your computer using the AnkerMake slicer, you did something wrong.

[@nickholl]

The detail on the castle looks amazing for a filament printer. Do you think the new bambu a1 mini would produce such detail on its prints? I’m looking to buy my first printer but want to get the most detail possible on an entry level machine.

[@Leo_TheCat]

I have been using the ankermake m5c and it is perfect. I would go out to say it is better than the Bambi printers expet that it does not have enclosure or multi colour printing however ankermake is producing a multicolour add on.

[@nickholl]

@@Leo_TheCat it’s a shame it’s still quite expensive in comparison. You can buy the a1 mini with asm for the same amount

[@ServentofTheMostMerciful]

1/3 the build area though.@@nickholl

[@geantcreeper]

Very cool video is it a good printer for cura and is it supporting the stop program ?

[@playconveyor]

I’ve not tried it with Cura yet… but will be testing out different slicers with it pretty soon!

[@muhammedirshaad]

What printer do you usually print with?

[@user-uc2dk1vp6e]

Can you print straight off the app no computer?
How do you input files from thingiverse

[@davesmith3562]

Didn't realise u were based in the UK?

[@elijahandrew3314]

Oh.... I got the elegoo neptune 4 pro ALSO WHAT 3D PRINTER DO YOU USE FOR ALL OF YOUR PRINTS IN YOUR VIDEOS???

[@playconveyor]

How do you find it? We use the Bambu X1C for most tbh

[@elijahandrew3314]

@@playconveyor oh thanks! I'm new to 3d printing and maybe if I get into it a bit more I will upgrade! (Also my printer has not arrived yet. :[ i just ordered it so i have to wait :[ :[ )

[@hhhhehehehhhhehehaha]

Where can I get that castle file?

[@edwingmauricioofficial6709]

It would be great if you show how to install a 3D printer

[@WeiChei]

Wdym install a printer? Like assemble it?

[@edwingmauricioofficial6709]

@@WeiChei Yeah, sorry my english isn't very good

[@user-bv3ft7ck4s]

This or elegoo n4pro;

[@Bizzb33]

What is the 3d printer u use that has multi color?

[@oliverlacika4994]

Basically every bambu lab 3d printer has ams support, but I think he uses the x1c the most

[@johnnussberger8505]

I'm guessing you can also use an iPad

[@johnnussberger8505]

yes I use my ipad mini

[@oliverlacika4994]

449€ is not cheap

[@Tafugames]

It’s actually 300$ on amazon

[@karersio7062]

first lol

[@playconveyor]

🏆

[@karersio7062]

@@playconveyor :D

[@user-qs6ry4jc1u]

ola

[@headhunter_4209]

i hate 3d print RUclipsrs that just print loads of garbage