You have a slash / line through your Bluetooth on the menu bar and You did not address looking for the Bluetooth which connects to the internal USB port through the M.2 wifi slot. Since the device does not show in USB ports in Hackintool it is either disabled in the bios or it is not functioning as any connected USB device should show before you start the port mapping. This internal port is mandatory unless you do not want Bluetooth working within the 15 port limit. Some cards will require additional Kexts to get the Bluetooth to show. Mapping out your internals may leave you with a spot for a carrier card PCI BlueTooth connection point. Take this into account when you choose your 15.
I'm using clover. Hackintool 2 doesn't work for some reason. When I connect a usb nothing shows in hackintool. I had to use USBMap to do the same thing. However, after I add my usb kext to clover kexts other, I see no difference. Let me explain. Before mapping all my usb ports were working, but I was told I need to map them correctly anyway. So I followed procedure and mapped all except 2 ports at the back to keep it at 15 or less. After putting the kext into the OTHER folder and reboot, those 2 ports at the back still function anyway. So I don't know where I'm going wrong??
Hi Tech Nolli, I have an issue when installing Mac OS in my hackintosh. When the instalation reaches to 12 minutes left it just gets stuck there with the only option of turning of the pc with the case button. It has been a nightmare, any ideas of how to solve it? Thank you.
Hi, i have a problem with my usb ports. All of a sudden they stop working. All of them. I have a hackintosh with big sur, and a z690 motherboard. Any ideas? Thanks!
Does this work the same for AMD?! I have a pcie slot that has a Bluetooth card in it that prevents the pc from sleeping. I was told to change it to internal instead of it being usb3. I also saw all your usb slots are internal too. Should it be this way?!
Thanks for your kindly technical knoledge shares. Please help me for one issue of built-in USB 2.0 HD UVB Webcam supported; but it is not working at applications on dual boot Big Sur Hackintosh with Windows 11 of Asus vivobook X512FL.
Hi Technolli, been following some of your older guides to get my Haswell desktop up and running with Big Sur and it runs great. I have a question though, if I decided to add a dedicated gpu like an AMD RX480 would I need to repeat the whole process or just plug in my card then edit my config plist and restart the pc. Would really appreciate any advice .
Hey i need help! I am makeing a hackintosh but when i am trying to mount efi to usb drive it says that there is no efi partition on disk. And before at the start when erasing the usb drive it was not showing "scheme" option only format. Could this be the problem? Thanks for helping
have recently attempted to install Monterey on my Dell Optiplex 3020 with Intel HD 4600 graphics. However, there are multiple glitches from curves in dock, notification area curve, glitch problem in curve area, can you make a video in this topic video regarding problem solve
nice tutorial Technoli! but what to do if I got Dell XPS 13 9360 laptop with 2 USB 3 ports , one UCB-C/Thunderbolt port and internal M.2 port with attached DW1560 Wifi/Bluetooch card .. I got Wifi working but cat get Bluetooth to work.. forum suggest that I "map my USB ports" but I don't know how to do that for internal Wifi/Bluetoosh card? thanks in advance for any tips.
Great video, learned a lot. Could you help me with getting wifi and bluetooth up on a gigabye z490 aorus ultra g2 with rx 6600xt and intel 10th gen cpu. Or is there already a video for that:)
Amigo saludos excelente video. EN mi caso tengo una b460 gigabyte y cuando enchufo los usb no me lo detecta. Veo a ti te lo detecta que puede ser mi problema
I tried this on my MSI H410M Pro intel Hackintosh but the USB3 drives still don't mount in the USB3 ports and the green stripes in Hackintool showing active USB ports don't show those ports as active. They work fine with USB2 drives. I tried the process you show three times but still not working. Any thoughts? Thanks!
You have and unsupported USB Device and you need to follow the previous tutorial to edit the Unsupported USB kext to match you device. The ports will then show.
Nice Tutorial, but my USB 3.0 ports are not getting detected along with USB 2 on Case connected with motherboard headers Inam using MSI B460M mortar with i3 10105 Is there any way to get the same detected Also in our country Ticktock is not allowed, hence the only way I can connect with you is on You Tube
hey Technolli, we love and enjoy your tutorial videos, but we have not succeeded in hackintoshing a Dell Latitude 5580 nor an HP Elitebook 540. Can you please help us? We have researched multiple sources, but no-can-do. We don't have a Mac to create a bootable USB flash drive with all the fixings, especially the "config.plist" for these two Graphic boards> Thanks in advance
I ruined my Big Sur 11.6 with this method! Now i can not boot. I tried implement old EFI to Mac (i had to it in Windows!!) but now all USB ports dead in MacOS partition. Z370N does not have USB 2 ports and now i can not use my keyboard and mouse (or any periperial)
Welcome back Mike. We missed your videos. Great video. Thanks
You have a slash / line through your Bluetooth on the menu bar and You did not address looking for the Bluetooth which connects to the internal USB port through the M.2 wifi slot. Since the device does not show in USB ports in Hackintool it is either disabled in the bios or it is not functioning as any connected USB device should show before you start the port mapping. This internal port is mandatory unless you do not want Bluetooth working within the 15 port limit. Some cards will require additional Kexts to get the Bluetooth to show. Mapping out your internals may leave you with a spot for a carrier card PCI BlueTooth connection point. Take this into account when you choose your 15.
Hey my friend will you be making a Z390 install for Monterey any time soon? We need you, we need that ole Blade Runner.
Cuestion: I go to that option and hackintool dont shows me the ports, and in the Series column seads Unknown, you know whats the problem?
I'm using clover. Hackintool 2 doesn't work for some reason. When I connect a usb nothing shows in hackintool. I had to use USBMap to do the same thing. However, after I add my usb kext to clover kexts other, I see no difference.
Let me explain. Before mapping all my usb ports were working, but I was told I need to map them correctly anyway.
So I followed procedure and mapped all except 2 ports at the back to keep it at 15 or less.
After putting the kext into the OTHER folder and reboot, those 2 ports at the back still function anyway. So I don't know where I'm going wrong??
Does apple Update and patches work on Hackintosh build ?
Welcome back. I have missed your wonderful content
Hi Tech Nolli, I have an issue when installing Mac OS in my hackintosh.
When the instalation reaches to 12 minutes left it just gets stuck there with the only option of turning of the pc with the case button. It has been a nightmare, any ideas of how to solve it? Thank you.
Hi, i have a problem with my usb ports. All of a sudden they stop working. All of them. I have a hackintosh with big sur, and a z690 motherboard. Any ideas? Thanks!
Does this work the same for AMD?! I have a pcie slot that has a Bluetooth card in it that prevents the pc from sleeping.
I was told to change it to internal instead of it being usb3. I also saw all your usb slots are internal too. Should it be this way?!
I want to pair an asrock h570m-itx/ac with a 11600K for hackintosh, just worried about compatibility. Will this motherboard work?
I want to build an high end i9 hackintosh. What quality motherboard would you recommend for best performance and easy to setup ?
Thanks for your kindly technical knoledge shares.
Please help me for one issue of built-in USB 2.0 HD UVB Webcam supported; but it is not working at applications on dual boot Big Sur Hackintosh with Windows 11 of Asus vivobook X512FL.
Hi Technolli, been following some of your older guides to get my Haswell desktop up and running with Big Sur and it runs great. I have a question though, if I decided to add a dedicated gpu like an AMD RX480 would I need to repeat the whole process or just plug in my card then edit my config plist and restart the pc. Would really appreciate any advice .
Hey i need help!
I am makeing a hackintosh but when i am trying to mount efi to usb drive it says that there is no efi partition on disk.
And before at the start when erasing the usb drive it was not showing "scheme" option only format. Could this be the problem?
Thanks for helping
Is there any solution for AMD USB mapping? Would be great to have your awesome amd usb tutorial.
There is a good guide by Aleksandar Vacić - just google his name and usb mapping.
@@m.l.9385 i didn’t find any Aleksandar Vacić and if you have link would be nice of you to share.
So cool the open core configurator!
I think you stopped these videos but any chance to get back to make new videos
please do a HDMI fixing video too. Thanks
have recently attempted to install Monterey on my Dell Optiplex 3020 with Intel HD 4600 graphics. However, there are multiple glitches from curves in dock, notification area curve, glitch problem in curve area, can you make a video in this topic video regarding problem solve
Please make Hackintosh tutorial for Z590 motherboards
I am going to be that person to ask you to also show this process for AMD. I know it is way harder so we could use the help!
I will second the AMD request.
I will third your request
Same
Same too
nice tutorial Technoli! but what to do if I got Dell XPS 13 9360 laptop with 2 USB 3 ports , one UCB-C/Thunderbolt port and internal M.2 port with attached DW1560 Wifi/Bluetooch card .. I got Wifi working but cat get Bluetooth to work.. forum suggest that I "map my USB ports" but I don't know how to do that for internal Wifi/Bluetoosh card? thanks in advance for any tips.
Great video, learned a lot. Could you help me with getting wifi and bluetooth up on a gigabye z490 aorus ultra g2 with rx 6600xt and intel 10th gen cpu. Or is there already a video for that:)
Amigo saludos excelente video. EN mi caso tengo una b460 gigabyte y cuando enchufo los usb no me lo detecta. Veo a ti te lo detecta que puede ser mi problema
I tried this on my MSI H410M Pro intel Hackintosh but the USB3 drives still don't mount in the USB3 ports and the green stripes in Hackintool showing active USB ports don't show those ports as active. They work fine with USB2 drives. I tried the process you show three times but still not working. Any thoughts? Thanks!
You have and unsupported USB Device and you need to follow the previous tutorial to edit the Unsupported USB kext to match you device. The ports will then show.
Nice Tutorial, but my USB 3.0 ports are not getting detected along with USB 2 on Case connected with motherboard headers Inam using MSI B460M mortar with i3 10105
Is there any way to get the same detected
Also in our country Ticktock is not allowed, hence the only way I can connect with you is on You Tube
hey Technolli, we love and enjoy your tutorial videos, but we have not succeeded in hackintoshing a Dell Latitude 5580 nor an HP Elitebook 540. Can you please help us? We have researched multiple sources, but no-can-do.
We don't have a Mac to create a bootable USB flash drive with all the fixings, especially the "config.plist" for these two Graphic boards>
Thanks in advance
my ga-h170 gigabyte I can't get hard drives to work only usb 2 or usb 3 thumb drives
I figured it out, I had to use bootflag Uia_excude= to disable a few ports before my usb 3 ports would show up in hackintool
Hello!I need your support.Where i contact you?
May you make a video for fixing power native management and battery indicator on hackintosh Big Sur, Sir? thank in advance😊
Always good info to have!
AMD users need USB mapping video too! Please, Technolli! 😭
My Bluetooth is not working. I have same motherboard.
tried this and now booting to an apple logo only .
Great Video.
Please also make a Video on how to Fix Sleep.
Ps: I am using MSI H410M Pro which you used in a video a few months back.
Thank you so much straight to the point as always
I ruined my Big Sur 11.6 with this method! Now i can not boot. I tried implement old EFI to Mac (i had to it in Windows!!) but now all USB ports dead in MacOS partition. Z370N does not have USB 2 ports and now i can not use my keyboard and mouse (or any periperial)
Thank you so much
thanks very helpful.
Mike is Awesome!!!!!
Thank you so much,super Tutorial!