Man im glad you got that piece its looking soo good ! Also im so stoked that the comp was excellent can not wait for mine to arrive ! Definitely get it while they are hot everybody on reddit is going crazy about them and buying them by bunches.
Congrats on the p01. I have a fully custom cz75d pcr that I carry a lot. I did full CGW internals myself, the ring race hammer, flat da/sa trigger. Sent off to Primary machine for 1911 buis plat and rmr install. Blacked out rear matching fiber green front, custom darkened burnt bronze cerakote, custom copper guide rod, custom copper grip screws, custom LOK grips, also have a set of copper color case Vytals but like the LOKs better. Banger of a pistol, one of my favorite.
Have you tried the Herrington Arms comp? Haven’t seen this one before. I have one of their Comps on my Hellcat Pro and I do enjoy the reduced recoil. If possible would you consider doing a compare video between the 2 comps? 🤙🏻🇺🇸
I just got the email that their FDE comp was back in stock. I kinda want it but feel kinda ridiculous buying another comp for the same gun. The HA comp does look better though imo.
@@JFR19 it's great on the compact dagger and it's awesome on the full size too. Makes a huge difference on your grip with the compact though. Super worth it
@@JFR19the 3d printed one from EBay for $14 is just as good as the GG or Slr or Harrington arms. I run the strike industries Quad comp on my Dagger and it’s a laser.
@@jamespayne9313 they were on close out because of issues with PSA's barrels. Per PMM website "Please note, these are marked down in price due to inconsistencies in length found among the PSA threaded barrels for the Dagger. Your gap will vary based on your barrel, as shown in the photos." just search for "dagger" and the link will come up.
@@920WASHBURN not a mistake.... Got it for $50 beans straight from PMM. Go look at their website right now. $50 is still the posted price, they're just out of stock.
I really appreciate that! I definitely want to do a backpack 300blk or a PCC. I would also really like to build out my .308 or 10/22, been looking at the MDT chassis all day 😂
Know what’s even funnier, the Strike industries micro Quad comp that fits any pistols works better than both. It doesn’t look bad but not as good as a pistol specific comp but it’s an easy install with no shims, loctite, etc. I’ve run it on hellcats, Sigs, Glocks, daggers, czs and more. Can install in 2 minutes and just freaking works.
![Lil Uzi Vert - We Good [Official Audio]](http://i.ytimg.com/vi/DrSfBULAsek/mqdefault.jpg)
Man im glad you got that piece its looking soo good ! Also im so stoked that the comp was excellent can not wait for mine to arrive ! Definitely get it while they are hot everybody on reddit is going crazy about them and buying them by bunches.
The radiant does not out preform that comp. Damn 50$ WTF my g43x was 350$
My bad 360$
You will love the P-01. Such a badass weapon. I’ve had mine for years and it’s one of the few that will never be sold/traded.
I'm loving it so far. Still want some CGW parts but even with factory internals, it shoots great.
Did a soft kit on my p01 since it's for defensive use. Like 80$ in CGW parts, amazing. Just ordered the cgw pro kit for my 75bd
Congrats on the p01. I have a fully custom cz75d pcr that I carry a lot. I did full CGW internals myself, the ring race hammer, flat da/sa trigger. Sent off to Primary machine for 1911 buis plat and rmr install. Blacked out rear matching fiber green front, custom darkened burnt bronze cerakote, custom copper guide rod, custom copper grip screws, custom LOK grips, also have a set of copper color case Vytals but like the LOKs better. Banger of a pistol, one of my favorite.
Have you tried the Herrington Arms comp? Haven’t seen this one before. I have one of their Comps on my Hellcat Pro and I do enjoy the reduced recoil. If possible would you consider doing a compare video between the 2 comps? 🤙🏻🇺🇸
Herringtonarms has a sweet compensator for the dagger it fits great i have one
I just got the email that their FDE comp was back in stock. I kinda want it but feel kinda ridiculous buying another comp for the same gun. The HA comp does look better though imo.
Just got one for my full size dagger. Paired it with a GG magwell and the thing is slick man.
Hell yeah! Ive been wanting to try one of those magwells for a while. Idk why I haven't pulled the trigger on one yet.
@@JFR19 it's great on the compact dagger and it's awesome on the full size too. Makes a huge difference on your grip with the compact though. Super worth it
@@JFR19the 3d printed one from EBay for $14 is just as good as the GG or Slr or Harrington arms. I run the strike industries Quad comp on my Dagger and it’s a laser.
Lets freaking GOOOOOOO🎉
Do the pmm comps fit both dagger slides? Carry cut and extreme carry cut.
Not too sure, mine are the extreme carry cut and there's not much room to spare.
There’s a chart on their site which shows compatibility and fitment
Hey brother what mag is that and where can they be found?
its just a factory Glock 19x magazine
what holster fits with that comp & the light
@@Boldorbroke Tier 1 Concealed MSP. 👍 Great holster.
Any ftf issues and do I need plus p ammo ?
@@lgeagle8225 Neither in my experience. For me it's run on the factory recoil spring with various JHP and HP ammo from 115g to 147g.
P-01 is dope! Got mine milled at impact machine.
I love it dude. Can't wait to get mine back.
And lawd, I've seen some questionable stuff from them lately. How's yours turn out?
Where did you find this compensator for $50?
PMM had them 50% off, just caught it at the right time.
Can’t find them on their site!! I need this!
@@jamespayne9313 they were on close out because of issues with PSA's barrels. Per PMM website "Please note, these are marked down in price due to inconsistencies in length found among the PSA threaded barrels for the Dagger. Your gap will vary based on your barrel, as shown in the photos." just search for "dagger" and the link will come up.
Nowhere. I think he made a mistake because I've been watching these for a while and they've always been 100 bucks
@@920WASHBURN not a mistake.... Got it for $50 beans straight from PMM. Go look at their website right now. $50 is still the posted price, they're just out of stock.
Take the rubber from the thread protector off it got all in the threads of mine with the comp
Yeah that was just for test fit and fire. It's timed with loctite and shims now.
Enjoying the channel. Any plans for rifles?
I really appreciate that! I definitely want to do a backpack 300blk or a PCC. I would also really like to build out my .308 or 10/22, been looking at the MDT chassis all day 😂
Did you do the stipple job?
I did, botched a couple areas but I'm pretty happy with it.
@@JFR19 Looks good to me!
Which model comp is this?
I think it's discontinued, pretty sure they just had it labeled as the PMM comp for Dagger. Or something like that.
Is that the large frame ?
Yup, this is the fullsize s
Thanks
Wager will mill the P01 for a Holosun 407k...
Co-witness with stock sights, you'll think it came that way from the factory. Totally worth it.
Looks good, just don't like the shims that you have to play around with.
You might want to clean that powder residue off that O-Light before that light gets too bad..... LOL
Olight? I'd never disrespect my guns with one of those. 😂
Radian does not work better you got it backward.
You’ve got both??
@@sliderkitzthere are multiple test done on them
Know what’s even funnier, the Strike industries micro Quad comp that fits any pistols works better than both. It doesn’t look bad but not as good as a pistol specific comp but it’s an easy install with no shims, loctite, etc. I’ve run it on hellcats, Sigs, Glocks, daggers, czs and more. Can install in 2 minutes and just freaking works.
Davis Cynthia Miller Maria Perez Kimberly
Miller Timothy Harris Helen Robinson William
Lee Larry Martinez Donald Lopez Gary
Rodriguez Sandra Brown Robert Young George
Young Gary Garcia Margaret Williams Sarah
Clark Anthony Young Betty Martin Scott
Johnson Sharon Lopez William White Frank
Williams Karen Moore Michael Lee Jeffrey
Walker Patricia Hall Christopher Martin Betty
Perez Elizabeth Martinez Dorothy Harris Betty
Clark Thomas Anderson Susan Wilson Karen
out of stock
Been out for a while bro.
@@JFR19 i was today years old when i even found out about it tho
@@p00lboy yeah, I just happened to stumble upon it on PMM's page and snagged one.
Before I hadn't heard a word about it.
They have em in stock