If you could pick only one car mod what would it be? 🤔 For a LIMITED TIME we have up to 15% off AVID1 wheels and up to 25% off Enkei wheels! Don't miss out! www.fitmentindustries.com/todaysdeals
My top mods on a budget: 1. Front lip/budget aero to make that front end or car just look a bit more appealing. 2. LED lights anywhere I can replace them on the vehicle. Brighter has been better. 3. Interior upgrades (shifter already stated). But dash, panels and console looking the way you want improves day to day driving because you fall in love with the inside of your car too. That's all from me.
@@joshuawilliams1477 my neighbor has a 2011 TSX 6speed with the rear interior stripped to the bone with a lot of the front interior missing! But still at glance looks stock! Shit rips!
Think im only on my 6th car in 12 years. First 5 cars were all second hand beaters with over 200 to 300k miles. Just got my first performance car ever and actually bought the car from a lot instead of a family member. Was very lucky to stumble into a stock saturn ion redline supercharged.
I bought a new car within the last month. Wheels/tires, exhaust & brembo brakes all delivered within the same week of each other . No shame in starting & finishing the little stuff at the same time!
I've only had 2 cars with tint - 07 Cobalt had 35% sides and back and my current DD (16 Fusion in Ruby Red) has 30% sides and back and 50% windshield...it's so nice...I wanted 70% windshield just for glare, but they talked me into 50% and I think I wouldn't go any lighter in the future...very happy. The Fusion being a daily looks great with the tint, H&R springs/Koni shocks and struts, and 18" Konig Hypergram's in matte grey. It's slow as hell, but it looks decent. A few Steeda goodies for handling as well. As for exhaust...my Cruze (yes, you can laugh all you want) has full catless exhaust, IC, intake, BPV, tune, and a whole lot of suspension/handling mods. I have a few things left to do (wastegate, high voltage coil pack, port my intake manifold, and upgrade from H&R springs/Bilstein shocks and struts to coilovers and get some different wheels tires because I've been running stock wheels on lowered car for 7 years. Car is a little heavy, but it's still pretty fun - not close to fast, but it handles well and it surprises people who are oblivious to the work done.
I’m building a fun car not a scary fast one so I’m going to do BC Racing DS coil overs, bigger brakes with stainless brake lines (maybe dot4 fluid), good tires and some lighter wheels.
I want the liveries and bodykits from the 2000s to come back more than anything tbh. A lot of them flowed with the car's design pretty well (I'm talking about the good ones, not the $200 eBay full kit with a stick on wing). And yeah, the underglow was sick too. Ya know what, just bring back the "ricer" age, everyone was much more creative, and only wanted what they liked.
I think a good immediate upgrade is a solid double or single din radio or maybe even door speakers, also LED lighting on the interior and exterior make a big difference in the way a car looks
Pwrsonally i think peoples first "mod" should be general maintenance especially on a 10 to 20 year old car at or over 100k miles. Underglow and nice wheels dont do much if you car jumps timing because it has the flawed OEM tensioner bilt and not the upgraded one. Each car type is different on what needs fixed from the factory but that shit needs done first.
@@louiev.3367 Yep especially an older car like that. Even my 14 year old supercharged saturn ion redline is at an age it needs 3 to 5k of work in it before i go throwing a bigger blower on it or any other mods. Paint and even suspension and such can and will wait normally. Sucks but its better to have a working car than a pretty one
@@billybuchanan385 yea car runs fine but now it needs a new turbo after an entire engine swap off from another z and it's just annoying how stuff needs to be held off, but I have been test driving it at least to be sure nothing breaks
My top budget mod was a Stage 1 apr tune. I have a 2017 1.4 tsi jetta which makes about 150hp. The tune costed me around $400(got it done at Accumoto in Waunakee). With a new intake and exhaust im making just under 200 hp and 260 lbft of torque. Probably the best bang for buck mod i did.
@@whiplash-wl8764 I think you mean the other way around? 15% is darker than 50%. I had 35% windshield and loved it during the day, but at night or in rain it was pretty sketch
I had bad tires on a 350z that were new from the previous owner but sucked so bad for the rain I couldn't even put down quarter throttle and paid for my regression with a wrecked Z. Was very sad but learned from it and run a touring 370z with PS4S tires and they are godlike.
wheels and tires were my first buy. Then an air intake. then coil overs which are on their way soon (hopefully). I then bought an exhaust system headers, cat,. and catback. then a front lip, side skirts, and diffuser
Just bought a 2011 VW TDI Sportwagen and the first 2 mods I’m gonna do are a Full rawtek performance exhaust and a Malone stage 2 tune along with a DSG tune can’t wait. Had the car for less than a month and the parts are already ordered.
I wouldn't say down pipe as they're usually around a grand in cost and modern cars you'd need a tune as well which would be about the same price I'd say sub 500, front pads, rotors, thicker rear sway bar, tyres when discounted and coated wheels
I went nuts and went full beans, down pipe, after market intake, wheels tires, and lowered suspension but god damn was it all worth it. Smiles per gallon
Tell that to this list... $332- 50"x30' roll of 2x2 carbon fiber twill weave $260 - 2gallons of clear resin $88 - PVA mold release $25 - 20 paintbrush $15 - 100 count various sanding discs $47 - 100 count resin safe gloves $19 - spray on adhesive Plus 3 weeks of working on my project 5-6hrs every night after a 10hr shift of delivering pizza. Lost sleep and many late nights later. Results.... Completely Carbon Fiber 350z front end... So yeah weight reduction is free 👍
Kartboy short throw shifter on my 19 wrx is hands down the best mod I've installed besides the aftermarket catback exhaust which I have the tomei expreme TI
First things to do to your civic Stance Headlights (smoky headlights are mandatory for civics, known fact) Wheels (no fucking bigger than 17s, and that's pushing it)
Under glow is illegal in Va; short throw shifters are good diy mods; window tint is only legal in Va at a stupid 50 up front and 35 in back and only allowed to tint the windshield with a medical waiver
@@SheekAlibaba Well sure but there's still platforms from 04 and earlier that are still viable today and more cost effective to make power from. Idk I guess it depends on what he wants but I just can't reccomend any 4.6L to anyone if they aren't getting a killer deal.
Are you running catless? If you get a catless downpipe you will most likely get a CEL. However it’s recommended anytime you’re making a modification like that you tune your car to get the most benefits.
You may never realize the failure of old age until you are left with no investement to fall back on . Pension and social security benefits isn't enough .
We are living in a pivotal times and there are so many opportunities for entrepreneurs who invest in reinventing low tech items such as household waste and learn sustainability . I have never comprehend how much a bunch of numbers floating around the spreadsheet can sustain human Life or soul . What will people eat when the food supply stops ?. what will be the stream of income after retirement or dismissal . This should be the utmost concern of everyone. A good financial Analyst and professional knows whats beneficial to his investors
We got you fam! Shoot us an email sometime and we can get some ordered for you! Or just check them out on our site! --> www.fitmentindustries.com/store/spacers
Just cut down the entire car until the only thing that remains is the bottom of the car, then weld on a seat, get a steering wheel in ur hand and boom, thats a whole lotta weight reduction
![Quando Rondo - Grow Up [Official Music Video]](http://i.ytimg.com/vi/8zFnCg3BO4Q/mqdefault.jpg)
If you could pick only one car mod what would it be? 🤔
For a LIMITED TIME we have up to 15% off AVID1 wheels and up to 25% off Enkei wheels! Don't miss out!
www.fitmentindustries.com/todaysdeals
Exhaust for the sportwagen
Turbo😂 so I can keep buying new engines
Tune
Coilovers
Rims. I like a looker over everything
My top mods on a budget:
1. Front lip/budget aero to make that front end or car just look a bit more appealing.
2. LED lights anywhere I can replace them on the vehicle. Brighter has been better.
3. Interior upgrades (shifter already stated). But dash, panels and console looking the way you want improves day to day driving because you fall in love with the inside of your car too.
That's all from me.
Weight reduction is free 🤝
Who tf needs seats??
@@joshuawilliams1477 my neighbor has a 2011 TSX 6speed with the rear interior stripped to the bone with a lot of the front interior missing! But still at glance looks stock! Shit rips!
@ShawnDon 97 yes
Not if you are a Porsche gt3
Make a transmission delete it worked for me
"Elite manual cars"? In Europe we call them... cars.
Not anymore. Most of the cars are now also automatic.
Remove tires to reduce weight 👍
💀😂
@@horriblewater7548 nah nah nah, always take out your frame chassis and body panels. That will save you the most weight.
LETS GET THEM TO 800K BEFORE SEMA
🍔
30 cars!? Dang, this man goes through cars faster than a rotary goes through its apex seals! 😂
Think im only on my 6th car in 12 years. First 5 cars were all second hand beaters with over 200 to 300k miles. Just got my first performance car ever and actually bought the car from a lot instead of a family member. Was very lucky to stumble into a stock saturn ion redline supercharged.
@@billybuchanan385 Nice find! Best of luck to ya!
“faster than a rotary goes through its apex seals” crazy how people who don’t know about the engine act like they do 🤣🤦♂️
@@CarsandCollectors Issa joke, bud. I know how a rotary works.
I bought a new car within the last month. Wheels/tires, exhaust & brembo brakes all delivered within the same week of each other . No shame in starting & finishing the little stuff at the same time!
I've only had 2 cars with tint - 07 Cobalt had 35% sides and back and my current DD (16 Fusion in Ruby Red) has 30% sides and back and 50% windshield...it's so nice...I wanted 70% windshield just for glare, but they talked me into 50% and I think I wouldn't go any lighter in the future...very happy. The Fusion being a daily looks great with the tint, H&R springs/Koni shocks and struts, and 18" Konig Hypergram's in matte grey. It's slow as hell, but it looks decent. A few Steeda goodies for handling as well.
As for exhaust...my Cruze (yes, you can laugh all you want) has full catless exhaust, IC, intake, BPV, tune, and a whole lot of suspension/handling mods. I have a few things left to do (wastegate, high voltage coil pack, port my intake manifold, and upgrade from H&R springs/Bilstein shocks and struts to coilovers and get some different wheels tires because I've been running stock wheels on lowered car for 7 years. Car is a little heavy, but it's still pretty fun - not close to fast, but it handles well and it surprises people who are oblivious to the work done.
I’m building a fun car not a scary fast one so I’m going to do BC Racing DS coil overs, bigger brakes with stainless brake lines (maybe dot4 fluid), good tires and some lighter wheels.
Use dot 5.1
Get some long tube headers. They work like a charm
Console engineers werent talking to the transmission engineers.... ouch that hurt 🤣🤣🤣
perfect way to spend my lunch
I want underglow to come back in style i always thought it looked good
Seems like it’s been back for a bit now
I mean who cares? Just do what you want.
I want the liveries and bodykits from the 2000s to come back more than anything tbh. A lot of them flowed with the car's design pretty well (I'm talking about the good ones, not the $200 eBay full kit with a stick on wing). And yeah, the underglow was sick too.
Ya know what, just bring back the "ricer" age, everyone was much more creative, and only wanted what they liked.
Same 😂 I am happy it’s back
I think a good immediate upgrade is a solid double or single din radio or maybe even door speakers, also LED lighting on the interior and exterior make a big difference in the way a car looks
Pwrsonally i think peoples first "mod" should be general maintenance especially on a 10 to 20 year old car at or over 100k miles.
Underglow and nice wheels dont do much if you car jumps timing because it has the flawed OEM tensioner bilt and not the upgraded one. Each car type is different on what needs fixed from the factory but that shit needs done first.
@@billybuchanan385 yea I want to paint my z31 so badly but I know a lot of things need to be done first
@@louiev.3367 Yep especially an older car like that. Even my 14 year old supercharged saturn ion redline is at an age it needs 3 to 5k of work in it before i go throwing a bigger blower on it or any other mods.
Paint and even suspension and such can and will wait normally. Sucks but its better to have a working car than a pretty one
@@billybuchanan385 yea car runs fine but now it needs a new turbo after an entire engine swap off from another z and it's just annoying how stuff needs to be held off, but I have been test driving it at least to be sure nothing breaks
Exhaust and intake for me first. Then probably coilovers and wheels and tires.
My top budget mod was a Stage 1 apr tune. I have a 2017 1.4 tsi jetta which makes about 150hp. The tune costed me around $400(got it done at Accumoto in Waunakee). With a new intake and exhaust im making just under 200 hp and 260 lbft of torque. Probably the best bang for buck mod i did.
Tinted windshields are cool till you hit a backroad and can’t see 10 feet in front of you😂
I would personally go with a little tint, but not a full 50%, maybe more like a 15%.
@@whiplash-wl8764 I think you mean the other way around? 15% is darker than 50%. I had 35% windshield and loved it during the day, but at night or in rain it was pretty sketch
I had bad tires on a 350z that were new from the previous owner but sucked so bad for the rain I couldn't even put down quarter throttle and paid for my regression with a wrecked Z. Was very sad but learned from it and run a touring 370z with PS4S tires and they are godlike.
wheels and tires were my first buy. Then an air intake. then coil overs which are on their way soon (hopefully). I then bought an exhaust system headers, cat,. and catback. then a front lip, side skirts, and diffuser
Day 72 of asking Fitment Industries to bring back Wheel History.
This is what brought me to watch their videos in the 1st place..I liked knowing the history of these companies!!!
@@pennycopperhatch9315 Me too!
Just bought a 2011 VW TDI Sportwagen and the first 2 mods I’m gonna do are a Full rawtek performance exhaust and a Malone stage 2 tune along with a DSG tune can’t wait. Had the car for less than a month and the parts are already ordered.
Solid shifter base and cable bushings with a weighted shift knob can be better than a short shifter for a daily, imo.
My s550 mustang isna budged build and have gotten all my mods off Craigslist and Facebook marketplace and its going great
Underglow (neon lights)
Short throw shifter
Window Tint
Wheels (rims)
Aftermarket Downpipe
Tires
Ceramic coating rims
Got that sweet sweet Volvo plate holder for my Mk7 Golf, so it's not just screwed into the bumper.
I wouldn't say down pipe as they're usually around a grand in cost and modern cars you'd need a tune as well which would be about the same price
I'd say sub 500, front pads, rotors, thicker rear sway bar, tyres when discounted and coated wheels
Love figment industries
Great channel to watch
Muffler delete and lowering springs are some of the best
I went nuts and went full beans, down pipe, after market intake, wheels tires, and lowered suspension but god damn was it all worth it. Smiles per gallon
Tell that to this list...
$332- 50"x30' roll of 2x2 carbon fiber twill weave
$260 - 2gallons of clear resin
$88 - PVA mold release
$25 - 20 paintbrush
$15 - 100 count various sanding discs
$47 - 100 count resin safe gloves
$19 - spray on adhesive
Plus 3 weeks of working on my project 5-6hrs every night after a 10hr shift of delivering pizza. Lost sleep and many late nights later. Results....
Completely Carbon Fiber 350z front end... So yeah weight reduction is free 👍
Apart from weight reduction, going lower downpipe 3 inch exhaust and full tune was the post gains for the money.
Wheels and tires are my first go to changes looks and feel and something everyone will notice.
But don´t forget the Maintenance :P
Kartboy short throw shifter on my 19 wrx is hands down the best mod I've installed besides the aftermarket catback exhaust which I have the tomei expreme TI
Ayeee ShakoBuilt is in the video!!! Let’s goooo ❤️
You already know 🤝
LEDs, tint, ...headlight housings are pretty cheap depending on the make/model and make a huge asthetic difference.
Faster than my dad said he gonna get some milk
Flame decals ezy +25hp per sticker.
The products sold by them are al lot more expensive than they really are 😂
When you try underglow and get addicted and do the hole car with LEDs
Hey Sean, can you make a 'shorts' video explaining what the D1-D4 means on older 90s-2000s cars?
Can you elaborate a bit? Is this the gear counter for automatic transmissions?
@@FitmentIndustries yea, I feel like Sean would do a killer 50 sec video that I can just show people when they hop into my 02 Accord 😂
when you have a nc, biggest mod was coilovers
what is a good step up from hannook ventas v2 205 50 front... 195 50 rear set up 96 corolla 15x6.5 rays TOMS RACING c3 spirits
First things to do to your civic
Stance
Headlights (smoky headlights are mandatory for civics, known fact)
Wheels (no fucking bigger than 17s, and that's pushing it)
im glad underglow is back
I prefer puddle lights over underglow tbh just more into less and vio builds too
That underglow on the frs in the beggining had me thinking taste the rainbow.
I want an IS350 f sport. My mom owns one and she wants to give it to me but I just got my first job and monthly is expensive. What do I do??
So what if I want a Porsche 944? What mods are good?
any good recommendations for plug in tunes for a scion frs? There doesn't seem to be any good performance dyno shops in the Michigan area
I've run air80 ceramic tint on my windshields for years and have never had issue. I dont think I'd do 50% because I do drive at night
Could you guts do a vid about best performance mods for diesel cars?
Under glow is illegal in Va; short throw shifters are good diy mods; window tint is only legal in Va at a stupid 50 up front and 35 in back and only allowed to tint the windshield with a medical waiver
Where can I purchase spacers for my 16 IS300 AWD Fsport
I have a 2000 Chevy 2500 express van with intentions of a dajivan aesthetic.
Help with rim ideas ! it’ll be my learner for all things fun
Where do yall get underglow from?
Any budget friendly mods for the Audi S5?
I'd say underglow, tint and tune to begin with. It's a pretty sweet car already. ✌🏻
Can you guys make a video about center wheel locks? The ones that come on Porsches and lambos. Thanks!
Not a bad idea!
First mods are always, wheels, tires and suspension!
Omg the first mod I bought for my eclipse was a dragon all z shift knob. Lol
Tune for most BMW applications are only a few hundred bucks. No where near that $800-$1,200
I was think about getting a 04 mustang gt premium coupe 2d, is that good? And it’s only 4k
There great to modify
The 2v 4.6 is super outdated and obsolete now, but still sounds amazing!
@@Chrislav7 It's a 2004 of courses outdated😂 still fun and as u said sound Great with the bear minimum
@@SheekAlibaba Well sure but there's still platforms from 04 and earlier that are still viable today and more cost effective to make power from. Idk I guess it depends on what he wants but I just can't reccomend any 4.6L to anyone if they aren't getting a killer deal.
@@Chrislav7 yeah I wouldn't pay more then 3.5k for one and that's a clean one.
So you want a Ford Focus XR5 Turbo day 6
It's slow, but I'm gonna get there
Sounds good though
@@Chrislav7 They sound amazing. that 5 pot is very unique
Choccy milk holder
Great video
Thanks!
Does anyone have AVID1? Specifically av20 or av6s?
Because artisa artformed are the best wheels
❤️
CERAMIC COATING IS A LITERALLY A TIME AND MONEY SAVER! COATINGS ARE EASY TO APPLY AND THEY TAKE LITERALLY NO EXTRA MONEY THAN AN OIL CHANGE WOULD!
How much? Are they to get done
Guys, would I need a tune if I get a downpipe? Or can I just run the dp alone 🤔
Are you running catless? If you get a catless downpipe you will most likely get a CEL. However it’s recommended anytime you’re making a modification like that you tune your car to get the most benefits.
yes, you do need a tune or you might get check engine lights, have bad idle etc
@@FitmentIndustries hoping to go catless, just code the warnings out, and slight tune so it won’t run rich etc.
Resisting the urge to buy car parts 🙃 reminding myself a build takes time 😭😂
MY BOIIIIIISSSSS FITMENT INDUSTRIES
🙏🏼❤️
doesnt putting in a downpipe make your car not be able to pass smog? the hp gain seems great
Fully depends on the defouler you use if you're catless/cat sucks or if you get a high quality high flow cat that still catalyzes well.
@@Lastbluesun thanks man
I like the vids but someties I feel like it's almost the same "cheap car parts" videos just with a different. But still, good videos
SO YOU WANT A PONTIAC FIERO WHEN?!?!?!?!?!
Thought under glow was dead?
Nah underglow goes hard
let me guess if I want wheels tires and suspension I should go to fitment industries?
Absolutely fam 😂🙏🏼
I think most 90’s Honda’s look better without tint
30 vehicles 🤯
do you guys ship to canada?
Yes we do! 🙌🏻
@@FitmentIndustries Australia 🇦🇺🇦🇺🇦🇺?
Short throw shifter for my car is $400 🥲
You may never realize the failure of old age until you are left with no investement to fall back on . Pension and social security benefits isn't enough .
We are living in a pivotal times and there are so many opportunities for entrepreneurs who invest in reinventing low tech items such as household waste and learn sustainability . I have never comprehend how much a bunch of numbers floating around the spreadsheet can sustain human Life or soul . What will people eat when the food supply stops ?. what will be the stream of income after retirement or dismissal . This should be the utmost concern of everyone. A good financial Analyst and professional knows whats beneficial to his investors
Budget friendly host talking about budget friendly mods 😂
Did you say underglow? Were already in 2021 rather save up on wheels!
Graphine coating wheels > ceramic coating wheels
artisa in 4x100
If I had a car, I would put ceramic coating on my entire vehicle.
We got you fam! Shoot us an email sometime and we can get some ordered for you! Or just check them out on our site! --> www.fitmentindustries.com/store/spacers
@@FitmentIndustries you going to sell him a car first?
Day one of asking so you want a noble
Day 8 of asking for a So you want an E60.
Sweet v10
Theyre kinda ugly tho... but keep at it
@@Star_Taro Same way I find GTOs ugly.
Don't buy one if u don't like them. Easy as that.
15% on my GTO ;)
As soon as mans said he tinted his windshield, all credibility in this conversation was lost 💀💀💀RIP
notif squad?
thinking of buying a 1999 bmw m3...help me
Those are all well and good but nothing can improve your car for less money than some good polyurethane or spherical bushings
Facts
"So you want a Acura legend"
Delete cat..Sell to scrap yard...Make enough on selling cat to buy complete new exhaust system 🤣
Just always have a quarter tank of gas. Big weight reduction right there
Day 12 of pls talk about the tsx of Acura c:
Also discord when
Day 11 of me asking “So you wanna buy a Nissan Altima SE R”
“So you want a 2nd gen Lexus IS”
As an owner of one, I hope you like carbon buildup 🙃
@@badsportdriving5856 wait i follow you on instagram 💀
So you want a Mazdaspeed 6
Just cut down the entire car until the only thing that remains is the bottom of the car, then weld on a seat, get a steering wheel in ur hand and boom, thats a whole lotta weight reduction