Van's Aircraft RV-10 Build: Day 24 - Game Changing Deburring Tip (8-6 & 8-7)
HTML-код
- Опубликовано: 11 мар 2020
- Continuing work on the horizontal stabilizer, I share a really great tip (literally and figuratively) that we learned recently that I wish we had known about on this day while deburring all of the ribs for the HS. We also installed some really large rivets that were larger than the ones listed on our chart for our pneumatic squeezer and I go over how we worked around that.
The Van’s Air Force forum post with the deburring advice from Erik (KC10FE) - Thank you Erik!!
www.vansairforce.com/community...
Dremel 401 Mandrel we use with the cut down scotch-brite -- amzn.to/2IE0VTp
--------
Want to support my channel? Become a patron!
/ planelady
--------
If you're planning to purchase an RV (any model) from Van's and have enjoyed my videos, please consider printing the referral form linked below and returning it to Van's Aircraft when ordering your empennage kit or after you receive it. They will send me $100 as a thank you and it doesn't cost you any extra. Thanks! 😊
Referral Form: www.planelady.com/referral
--------
Like my "Why buy planes when you can BUILD THEM" t-shirts? Get your own as well as hoodies, long sleeve shirts, sweatshirts and other designs at my website 😊
www.planelady.com
--------
* Instagram: / plane.lady
* Facebook: / planelady
* Contact Me: www.PlaneLady.com
* Business Inquiries: christine@planelady.com
--------
List of different RV builders, including which model they are building, and their blogs or youtube channels:
www.vansaircraftbuilders.com/...
The builders I mentioned:
Ed & Colleen: www.goodplaneliving.com/rv10-b...
Rob & Christine: / @chaseeverysecond
Jason: / vihravendrel
--------
Music provided by Argofox:
A Himitsu - Adventures
• A Himitsu - Adventures...
DISCLAIMER: These are in no way, shape, or form instructional videos. All of my videos are solely intended to document our progress and to share our excitement and experiences with others.
#PlaneLady #experimental #rv10 
Авто/Мото
Hello, I am Erik, the Retired Flight Engineer who came up with the deburring tip......thank you for the shout out! That’s the first time i have been recognized here on RUclips. Thanks again!
Oh cool!! Thanks for your post on VAF! Ty found it and I already had the right dremel bit so we tried it and it is awesome!! That has come in SO handy in so many tight spaces. Thanks again for sharing your idea 😁 any other suggestions, tips or tricks you have to share?
Another tip for the million rivet holes in the skins, use the dewalt electric hand screw driver with the three bladed flute deburiing tip. The electric screw driver is the one, when you twist your wrist, it will slowly turn. That made deburring all those holes a ton faster. I think you can see it in the picture in my deburring post.
We have a small low power electric drill that we bought for cheap at Home Depot to use with our deburring bit. Goes slow enough not to countersink the holes, but like your screwdriver suggestion it sure makes deburring those large skins go faster! It’s the only thing we use that dinky little drill for, but it’s totally perfect for that so it was well worth it 😉
Erik.... You ROCK!! Great idea. I'll go inot the workshop and make some now for my RV-7 build.
Hello Erik, RV-9A builder in Texas here. Thanks for the tip; makes quick and easy deburring! We recently finished our empennage and are currently working on the left wing. ruclips.net/video/lMSb2S8OFps/видео.html
Thanks so much for this I have been trying to think of something like this. During building the tail I kept wondering why no company had produced little 3M bit sets for RV builders. Def a market for it
Glad it helped 😊
You and your husband, along with these videos, prove why Van's community ROCKS! well done :)
Thanks Glenn! 😁
This works extremely well and made my day on my RV-14 project. Thanks for sharing!
Thanks for the shout out! We enjoy watching your videos as well! It’s so fun to see your project come together. :)
Glad y’all like them 😊 it is fun watching everyone’s planes come together! Will be super fun when we’re all done - maybe we can fly somewhere together 😉
Plane Lady yes definitely!
Epic tip
That tip about making your own deburring bits for the dremel was genius. I just spent hours deburring the ribs for the flaps. Really wish I would have watched this video earlier today🤦♂️.
That’s *exactly* how we felt after seeing the forum post and trying it for the first time. So many hours we could have saved 😳
@@PlaneLady , I agree. Very cool. Just before I saw your video, I ordered this a few days ago...www.gesswein.com/p-7784-3m-scotch-brite-unitized-wheel-set.aspx. My guess is your home grown solution will still better than the small sized thin 3m wheel set I just ordered from a jewelry supply place. If my solution works well, I am committed to posting somewhere for the benefit of all.
Thanks for the shout out, and hope the tanks are going ok!!!
Y’all have had some good tips that have been helpful! Plus you’re nice enough to answer our random questions too 😜 fingers crossed - we’re starting sealing the first fuel tank tonight 🤞🏻
Fingers crossed for y’all too. I just installed my fuel sender units in both my tanks so once the proseal dries I’ll be dumping water in for an initial leak test. Pending no leaks there the rear baffles will hopefully go on next week sometime.
I agree, once we’re all finished building it’d be awesome to all do an RV-10 trip somewhere!
Thanks Auburn! Good luck to you too! We were able to divvy up the work on the wings and Ty’s been doing the L tank while I’ve been doing the main spars (aka countersinking hell 🙄). But feels like we’re making good progress tackling 2 parts at a time. We will have to find a fun spot where we can all meet up when we’re done 😊
Can you attach a link of where you purchased the 3m wheel as well. All of the ones I find online are too small. Thanks! Love the videos
Sure! We get the 2” 3M wheels from Cleaveland Tool: www.cleavelandtool.com/products/3m-cut-polish-wheel-2?_pos=8&_sid=76c006b4a&_ss=r&variant=18378209132606
Glad you love the videos - thanks 😊
I wanted to get your impression of your Plane Tools kit, did you order the RV10 tool kit or did you order tools as you went? I was looking to get the kit and wanted to get your opinion. Thanks!
Hey Thaddeus, we ordered the RV-10 tool kit from Cleaveland Tool but we made some tweaks to the kit. You can get an excel spreadsheet from them and make changes to customize it and still get the discount they give for buying a kit (I think it’s an 8% discount that you’re getting on all the components in the kit but I’m not sure so make sure to check with them). So for example, we removed the c frame and added the DRDT2, we added the pneumatic squeezer, we added more clecos, we added another deburring handle so both of us could deburr at the same time, things like that.
We have since bought other tools from them since we started, things we thought we needed (like more clecos and small diameter dimple dies) or wanted (like a longeron yoke, tank dimple dies, etc). It’s been very easy to just call Annette over there and tell her what we want to get and most of the time it goes out the same day and we’ll get it in a couple days.
So we did both - we ordered the kit (and customized it), but we have ordered other things as we went. If you’re concerned about getting things in the kit that you won’t really need that isn’t the case. I’m pretty sure we used just about everything we got while building our emp kit. Hope that helps! 😊
Do you know the model of that scotchbrite wheel? I can’t seem to find it anywhere.
I know Cleaveland Tool sells it. 3M cut & polish wheel - 2”
You can buy bits already made like that at the big box store.
I haven't seen any deburring bits like this made out of 3M Scotch-Brite, only deburring wheels. Where did you find some?
@@PlaneLady Look up mounted points. Wide selection of grits on Amazon.
I used a bit out of my dremel set to dress up my toolbox airfoil practice kits.
Thanks!
Another reference you might want to check is Tim Olson (friend of Ed & Colleen): www.myrv10.com/N104CD/index.html
Thanks! 😊 I took a peek and it looks like there is lots of helpful info on there (plus they’ve flown it to all 50 states?? How cool!)
Is that the 401 mandrel?
Yes 😊