PID loss in SOLAR Panels | Explained

[@danakinscheuer]

This panel can put out close to 100 watts ruclips.net/user/postUgkxOqI2yqX0XVrhR2BMJciTWrHJpG8FhJyg when positioned in the appropriate southernly direction, tilted to the optimal angle for your latitude/date, and connected to a higher capacity device than a 500. The built in kickstand angle is a fixed at 50 degrees. Up to 20% more power can be output by selecting the actual date and latitude optimal angle.The 500 will only input 3.5A maximum at 18 volts for 63 watts. Some of the excess power from the panel can be fed into a USB battery bank, charged directly from the panel while also charging a 500. This will allow you to harvest as much as 63 + 15 = 78 watts.If this panel is used to charge a larger device, such as the power station, then its full output potential can be realized.

[@drzeelpurohit3169]

Very nice explanation! It caused by environmental conditions (high temp - high humidity) + negative grounding + sodium ions migration from glass. It can be mitigated via float grounding connections as well as by using good EVA and back-sheet to reduce leakage current also by using low sodium glass.

[@SustainableEveryDay]

Thanks for the support

[@RamKumar-ox9xq]

Good morning

[@SustainableEveryDay]

Good morning

[@trivedihetav2117]

Hipot me pakad payenga pid?

[@Gopinath-panda]

Right

[@pankajverma2182]

Good Info. But the Plant some of the modules are in shadow. Juts behind you at the end of the video.

[@SustainableEveryDay]

Yes nice observation

[@maqboolakmal2083]

ماشاءاللہ بہت خوب مقبول اللہ تعالیٰ آپ کو کامیاب کرے آمین ثم آمین

[@rashidahmad3287]

یہ کوئی بھارتی ہے اردو نہیں پڑھ سکتا ۔

[@needzmart]

Very new and rare information you have provided in this video. Keep ot up.

[@syedali-mr3ok]

Very important knowledge I am gaining from your channel and dear I am very thanks for this information and just I am under the training of solar system and your all videos are very awesome

[@prakashjogur1244]

Thanku. Good Information.. I'm too O&M Engineer at Solar Power Plant

[@mdismail7637]

Where you working?

[@kevalsaini8273]

Hello kaha pr

[@nirajranjit191]

Hi,
I'm face this PID issue in my plant and complain to the Module Manufacturer ( 57 modules this issue ).
Manufacturer Quality team identify the issue but little bit confuse what type of issue this. ( they provide 7 Modules on warranty ).
That time I'm face very difficult situation.
Now I'm share this video to them.
Thanks Bro for this video.

[@SustainableEveryDay]

Thanks for the support

[@RajeshKumar-pe9xu]

thank you brother i am working Abu Dubai 1177 MV has an technician very nice explanation good luck my friend

[@er.williamsrohit2624]

Potential induced Degradation PID induced there is induced current and effectiveness of solar cell and module and high humidity and performance loss with less generated output power
When induced voltage are present in the solar cell impact on solar performer efficiency with generated power .
Prevention
1- more amount of leakage current then there is burning of solar module/ pannel due to high voltage are present in solar module .......stay safe with safe future 🙏

[@ajaytripathi4809]

You are doing fabulous job bro ...u are simply awesome ..ur effort guides professional as well as fresher..God bless u

[@SustainableEveryDay]

Thanks for the support

[@rooparam7398]

Sir Aap ke watsapp no kya ha

[@letsgochachu1667]

Very nice sir always learn something new from your videos.

[@SustainableEveryDay]

Thanks for the support

[@MuhammadIbrahim-oi8im]

Very Informative video Thanks Sir

[@sardarayoubsardarayoub1391]

Very cool knowledge full video.thanks Himanshu bro for information.

[@solarenergy1359]

Bahut accha video he or age ese hi lage rehna great job and best of luck you are no.one.

[@SustainableEveryDay]

Thanks for the support

[@ashrafmuhammad412]

Information is well explained. So Thanks.

[@SustainableEveryDay]

Thanks for the support

[@Samiullah-gh7cz]

Sir very informative video, your explanation is unique.

[@YOGESHYOGI-oi6ee]

Sir what is pid sir

[@SustainableEveryDay]

Thanks for the support

[@bikramparida8303]

Awesome explanation

[@SustainableEveryDay]

Thanks for the support

[@Solarismypassion]

clear perfect explanation - PID clear

[@Sonu-ng8ww]

Good information but back side Tedler hota hai white colour wala. EVA is transparent material which is used encapsulation and save from moisture. Thanks bro

[@KBelectricals]

Sir us string ko charge rakhna chahiye ya off kar dena chahiye

[@salmanjaved4393]

Bundle of thanks for delivered us quality knowledge.

[@SustainableEveryDay]

Thanks for the support

[@Neerajkumar-zs5qh]

Nice bro keep sharing the knowledge👍🙏

[@SustainableEveryDay]

Thanks for the support

[@gandhidas8109]

Nice information..Could you please tell me in case of lightning⚡ solar system stop working then what fault would be

[@SustainableEveryDay]

Damage equipment

[@Electrical_Soumen]

Bro tell why does charge does it flow in frame instead of In busbar

[@SustainableEveryDay]

Due to poor lamination , potential difference is developed

[@sureshkumarjena2350]

Very good explanation sir ,Thanks a lot.

[@SustainableEveryDay]

Thanks for the support

[@vikrant45]

small line on cell are ribbon, ribbon takes current to bus bar and then main bus bar

[@munawarjawaid9674]

Nicely explained regarding PID loss.
Thanks

[@SustainableEveryDay]

Thanks for the support

[@gurpalsingh7993]

Hum tumari vedio dekhte v hai orr share v karte hai ..hum v 50 MW Plant me JE hai...

[@SustainableEveryDay]

Thanks for the support

[@htoozawlwin968]

Hey, great content. it would be really fantastic if you can make explanations more in English. You'll definitely get more followers.

[@hanial-shadadi9122]

You are right.. At least give subtitles

[@rajendrapagare4948]

Very nice ..sir

[@SustainableEveryDay]

Thanks for the support

[@harilalyadav5057]

Bahut achchhi jankari dhanyavad.

[@smilewithdp2779]

Very important topic.. thankyou sir 🙏

[@SustainableEveryDay]

Thanks for the support

[@waqqarahad8762]

Nicely explained

[@roger1857]

Excellent knowledge. How to resolve PID issues?

[@niteshsood3000]

Thanks Himanshu..👍👍

[@SustainableEveryDay]

Thanks for the support

[@showbudgies1517]

Impressed finally some one explaining

[@chakra531]

can you please explain netmeetering and solar wheeling rules in UAE?

[@NurulHuda-l2i]

Thank U brother for ur explain,but how to protect it?

[@rameshwarmishra6002]

Thanks ❤❤ sir good information

[@SustainableEveryDay]

Thanks for the support

[@10_dharnebhisaji90]

Very nice explanation Sir 👍

[@kanakapudiajaybabu8321]

Potential induced degradation

[@somchandrasinghrawat3792]

Bahut sahi sir

[@SustainableEveryDay]

Thanks for the support

[@SandeepSingh-rz4ix]

I like it video viva and practical and interview questions answered video

[@SustainableEveryDay]

Thanks for the support

[@galcharviral1404]

Ya it is greate explanation but please avar Propper PPE like Full body harness with double lane yard (for life line ) , Safety helmate and safety jecket when you are working at Work at hight

[@zulfiqaralirawjani8351]

Xcelent informetion

[@solarverse8728]

Today I saw it video,it's amazing.....great job sir ,I am subscribe if channel

[@SustainableEveryDay]

Thanks for the support

[@amitabhbagchi1]

Very Informative vdo...

[@joshrrr3819]

Plzzz do more solar videos plzz ur videos good

[@satishsaxena2650]

So informative sir...

[@SustainableEveryDay]

Thanks for the support

[@dantesplay7498]

Why negative grounding is adopted in solar power plant?

[@MushtaqKhan-mp1bb]

❤❤ very good for teaching.❤❤

[@sumitmulik8005]

Very useful information 👍 thank you

[@SustainableEveryDay]

Thanks for the support

[@saibhakt1465]

Great... Thanks.... 👌👍

[@yatendrasingh4759]

New panel 13 rupe watt mil rha hai mono perk half cut bina warranty le loo kya please bataye

[@muhammadfarhananjum5423]

Zabardast sir

[@umeshchauhan955]

Sir floating voltage km nhi ho rha kya kre cable sb thik h inv. Me pm isolation fault aata h

[@khalidawan8072]

Very informative video

[@farhatalam8992]

well bro...zabardast......

[@subbaraoj]

This info not aware of many users

[@UKG9533]

Thanks sir i am too Safety officer Tata power solar system good information

[@adilakbar3053]

Nicely explained Sir

[@ElectricalEngineer888]

Great

[@SustainableEveryDay]

Thanks for the support

[@shubhamparab6028]

Best way to subcribe your channel 😂😀 nic way to understand sir ..

[@SustainableEveryDay]

Thanks for the support

[@mukeshbhardwaj1756]

Good afford dear
Please make video regarding sloar modules effect like snail trails, hot spot etc

[@SustainableEveryDay]

ruclips.net/video/PwcQbxIG6SY/видео.html

[@vipinpahujani]

Brother, thanks for taking so much effort. Is it true that n type cells, don't suffer PID losses ? Give some brand options for double glass module available in india for home rooftop use.

[@SustainableEveryDay]

Jinko

[@vikramvirk8421]

Thanks for good information

[@lokanathbehera8455]

Great sir,

[@SustainableEveryDay]

Thanks for the support

[@samisamiullah7567]

Hahaha maza aa gya Sir bht pyara bolty hain ap

[@SustainableEveryDay]

Bhai thanks

[@srk_21]

Thanks sir 🙌🙌

[@SustainableEveryDay]

Thanks for the support

[@KBelectricals]

Sir jin module ka glass toot jata hai un module ko maine jab separate string me laga kar jab uski efficiency chack ki tab doosri string ki tulna main uski efficiency 15% to 20% aa rahi thi

[@SustainableEveryDay]

15 to 20 efficiency drop hui correct ?

[@ramvilash1512]

Ji sir ak video optimizer ke working ke bare me banao..
Plz
What is the optimizar and optiimizar working.. Full details

[@SustainableEveryDay]

Sure very soon

[@sangappaguddad1999]

Thankful to you sir

[@ImranKhan-zr4bb]

5 years experience in solar panel manufacturing company in India greater noida

[@nareshdadi1441]

Super bro..
Very informative ..

[@SustainableEveryDay]

Thanks for the support

[@neelambora7555]

Very informative video...can you plz explain how reversing the connection can reduce PID effect...it's urgent..plz

[@a2zconcept416]

Hlo Himanshu bro AK vedio yr total fult py bnana or kasay unko ok kre

[@SustainableEveryDay]

Hm hmmm good idea , soon

[@jenaemaramara1994]

Can you add some subtitle or speak in english it will helped a lot especially non indians or pakistan engineers thanks

[@madanmalimali-w7l]

Hy Sir inverter me string reverse connection problem hore hai please solve the problem

[@Khurram.abbasi]

4kw k system mein kitne mm ki cable use hogi minimum aur konsi hogi
(From panel to inverter)

[@Sk-si6yv]

4sqmm dc cable poly cab used

[@abdulmunir8916]

What is it,s solution I have six solar panels in two have this is problem lines under the glass in some cell not in whole solar panel please guide

[@jawadulhaq8341]

Dear we have 3 pv panels connected in series output voltage is 109.5v but when it is connected to load(Batteries) voltage drops to 60V due to which system is not shifting to Solar batteries are not charging can u plz provide a solution on this

[@rcnvlogs8443]

Very nice 👍👍👍

[@surendrakverma555]

Good. Thanks 🙏🙏🙏🙏🙏

[@NehaSingh-hz9hd]

Sir Kisi bhi solar panel ki wind load capacity kse calculate krte h.......jse ki uska structure KSA bnaye ya fir wind se vo udhe hi na

[@SustainableEveryDay]

We use a software called StadPro for wind load & structure analysis

[@dkmanna]

Good information 👌👌 can you please clear how to know or check my modules have PID??

[@SustainableEveryDay]

Check genration efficiency from SCDA

[@dkmanna]

@@SustainableEveryDay Thank you.

[@aamirnoor4278]

Pid loose ko kistrah rok sakte hai ?

[@cricketanalysisguru003]

Good information

[@jaydevborisagar2513]

Very nice

[@SustainableEveryDay]

Thanks for the support

[@filledbynature6176]

Thank you

[@himanshukoli6575]

hey guys, this is Himanshu!!

[@SustainableEveryDay]

Both of us are popular

[@gurunanaksolar5993]

Thanks for the information 👍

[@SustainableEveryDay]

Thanks for the support

[@ayancraft2015]

That white color sheet is not eva, that's call back sheet or you can say tpt.
Eva becomes transparent after solar panel lamination.

[@djvanshpanipatking6675]

The current comes in the glass of the solar model, when the load is given, then the AC current is 110 voltage. What is the reason for this? earthing is good two ohm

[@SustainableEveryDay]

Cable insulation fault

[@artelugugaming6809]

Hi sir
The module has soil and shadow on it. How to separate the loss of both

[@shambhusharanbeni129]

50kw ka inverter hw.comm1 hai kaise dhik hoga

[@rameshmodi4051]

Thank you sir

[@SustainableEveryDay]

Thanks for the support

[@Techatul]

Great job bro...

[@SajidAli-th4rx]

Jis series k module m ye problem huwa us series ki puri voltage ko ground kr dega is tarah se ye plz reply

[@SustainableEveryDay]

Not complete voltage the amount will be very very small there will be drop in dc current density over period of time

[@SajidAli-th4rx]

@@SustainableEveryDay thanks

[@armack5099]

Thank you so much for given a good information 😊😊