Win A TRX4 High Trail: : raffall.com/354152/enter-raffle-to-win-a-brand-new-traxxas-trx4-hosted-by-phil-harrison Get the Rlaarlo RC Basher here: rlaarlo.com/products/rlaarlo-carbon-fiber-black-omni-terminator-rz001b-c?ref=TRC Dog Toy Tires (12cm): s.click.aliexpress.com/e/_DBz21XJ
@@TomleyRC bigger wheel means higher top end speed available but also a higher torque required for the acceleration and to keep the speed. The motors can only supply a limited amount of torque. That means that for the mass of the vehicle there is an optimal axle to tire size ratio for the specific motors you have. If the tire size gets too large, the available torque will not be able to get the vehicle to a higher speed. If you decide to go with more powerful motors, you also can't forget that different motors have different design speeds as well.
Love it gentlemen, I don’t understand why people get butthurt over things like that, it’s a blast of a hobby and we all give each other ideas and make funner! Thank you both❤
@@bowi73 Our dog was looking where the squeaking came from when you did it with your hands. Our old dog would have ripped the squeakers out within 5 minutes, they never lasted long with her and she was only a Bichon Frise.
We had a greyhound that went absolutely nuts when we encountered RC cars on a walk. Never saw him more excited about anything in his life. Squeaky toy RCs would have had him out of his mind with excitement.
@@williamreinhard We had a dog years ago that liked to chase my Control line planes around, not bothered when they were on the ground, similar to one of the dogs now who will try and chase my Radio Control planes again only while in the air. Seems to think she can get to the Red Kites that fly round here even if at 300 feet plus.
You made me spit coffee out my nose, Thanks Phil. I'd buy a pair, especially if they squeak. Was baffled when they performed better on the traction test in the shop.
Probably due to the rubber being a lot softer than standard tires. If you have played with any knobbly rubber toys you should know that there is a bit of flex in the knobs. But as we can clearly see, they will slip on smooth surfaces.
This is exactly what I've been trying to find for years. An RC tire that doesn't need an insert. One piece. J concepts and proline are going to see this and build them now haha. Awesome video
This was fun to watch and amazing how well they worked on the TRX4. I would love to see a video where you show up at a crawling outing with the dog toy tires. I am sure your friends would get a good laugh. You may have invented a new racing a crawling class. Great video.
You need the Big Bully Breed Donut squeaky toys and put them on a 1/8 scale heavy machine. It will then really squeak. That just sounded like a random mouse fart. 😂
Of all your awesome videos i've watched that has to be one of your best. Had me in stitches with the basher. One thing you didn't seem to pick up on though. There was hardly any ballooning of those tyres especially on the Rustler. Wonder if I can get some big enough for the Talion on Kraton 6s? 🤣
This is the coolest rc car videos ive watched. Never had hobby rc cars before but yours blow the Tyco ones i had in the 90s out the water. Great video and filmography
@@Seegster77 you saying if you filled your daily drivers tyres with concrete (or any material of your choosing) that it would still hit the same top speed?
@@Seegster77 ah yes, the train, with an engine and drivetrain designed to move the amount that a train weighs... do you have a degree in engineering? Or physics? Because i do 😅 google rotational mass and youll see exactly what im talking about, whydo you think race teams spend so much money on developing lighter wheels, to reduce rotational mass/load, meaning increased acceleration and less drivetrain loss, meaning more top speed
Kinda ironic, hyping yourself up like that, only to be wrong @@adamwolfy4826 He wasn't slower. Changing wheel sizes always inherently comes with calibration on speedometers needing done, in any type of vehicle. Had he clocked it with a radar gun and not the app, it'd have never been said that "he was slower". They just giving degrees out or what, as that's a beyond basic level understanding you flopped on.
Someone should really use the material made from those into a actual rc tire brand because on the crawler it actually sounded like a actual air filled car/truck tire slipping on gravel
Ok, Phil, you won the internet for today! 😂 But would those "tires" be accepted in competitions? Because, if yes, it's going to be freaking funny! 😂 Anyway, stay safe there with your family! 🖖😊
It's slower because if you take the radious, devide by the diameter, subtract the gear ratio and plus 3.14159 for the circumference = Me not having the faintest idea what im on about!
4:48 I would have to guess the reason the car is slower despite the 8ncrease in diameter is because the dog toy wheels are significantly heavier than stock. This increases the amount of unsprung weight, and makes the engine work harder to get same speed. So it lowers acceleration, range, and available torque.
Wild idea! I think the reason you have so much grip but can slide it around could be due to what mountain bikers call pass through on the tread. Looking at the tread blocks with the wheel facing you if you can see in between the blocks you have more pass through. If you see more tread blocks and less daylight you have less pass through. Most bikes run less pass through up front for grip and more pass through in back to help the rear tire slide. In a straight line no doubt you have plenty of contact. I’m surprised this isn’t an rc tire style with a proper bead.
the sliding effect is the same principle as knobbly motorbike AG tyres on a road surface instead of the offroad use they were intended, the tips of the knobs walk the tyre sideways(tho on a bike it usually means wipeout)
"What kind of vicious dog do you have, sir? You just bought four of these a couple of days ago." This might just bring an old brain-fart of mine back up from the bottom of the pile. I've been musing about painting and decorating a basher in a sort of Blue-Meanie-fast-attack-vehicle fashion, you know, the psychedelic baddies from "Yellow Submarine". Blue or orange tires would fit that theme so good.
Ok, I'm gobsmacked that those things worked as well as they did. You might have started something Phil. I had a good laugh when the dogs came and checked them out. Dogs where I am come and check your cars out anyway, this could complicate things.
Hmm wel wel wel... That was pretty Damm 🤭 good man and the music when you take him tru the mud and water was really beautiful (sorry for my language 💁🏻♂️ I'm from the Netherlands. Thanks for all what you do 👍🏾 but really!!! I'm saving for buggy for myself this time and not my children 😉 but it's difficult and I don't no how to do this winnings sometimes. But long message short 🤭 thanks for your hard work for us all my man 🙏
Only done this on real trucks for the crawler part. What I did notice is the tall skinny tires I ran did allot better at climbing than my wider knobby tires.
I think you found something new dude I might actually make some it just seems like the spikes are all around the tire so it has grip everywhere awesome video
Hell yeah brother! I thought I was watching Cleetus drive a Rustler for a minute. I was just waiting on the Traxxas to break before the dog toys gave up.
Hi Tomley, great video! Would you mind checking for wear on the drive shafts and diff cups. I was wondering if Rlaarlo maybe sent you a secretly upgraded version? 😬
Weirdly the lower contact patch actually probably helped with that initial slope test. Putting a lot of pressure through minimal points, so the contact point has more dig in.
Win A TRX4 High Trail: : raffall.com/354152/enter-raffle-to-win-a-brand-new-traxxas-trx4-hosted-by-phil-harrison
Get the Rlaarlo RC Basher here: rlaarlo.com/products/rlaarlo-carbon-fiber-black-omni-terminator-rz001b-c?ref=TRC
Dog Toy Tires (12cm): s.click.aliexpress.com/e/_DBz21XJ
For some reason I can't comment but you deffo need to put them on the low rider with the hydraulics
Probably need some smaller ones
Slower because higher rolling friction. That’s why they use Slicks on dry days, lowest rolling friction.
@@TomleyRC bigger wheel means higher top end speed available but also a higher torque required for the acceleration and to keep the speed. The motors can only supply a limited amount of torque. That means that for the mass of the vehicle there is an optimal axle to tire size ratio for the specific motors you have. If the tire size gets too large, the available torque will not be able to get the vehicle to a higher speed. If you decide to go with more powerful motors, you also can't forget that different motors have different design speeds as well.
0:17
You mean tires.
Wheels are the same as rims.
For inventing the language, you Brits suck at speaking it!
The random squeak coming from some landings was funny af
Yes. So funny 🤣
Need to try a heavier truck to see if you can achieve maximum squeak. 😀
Hahah that’s genius 😂
This is the kind of scientific research I come here for 😂
Haha.. the pleasure is mine 😅
I find it somewhat dogmatic... 🤭🤫
That’s my post you saw and my pic you used here. Glad you used it and loved the idea as much as I did lol.
Awesome… thanks for the idea! It worked so well haha. Glad you’ve not got upset like a certain someone who did the same on a crawler. 😅
@@TomleyRCwho got upset?😂
Genius stuff!
Love it gentlemen, I don’t understand why people get butthurt over things like that, it’s a blast of a hobby and we all give each other ideas and make funner! Thank you both❤
@TomleyRC now you’ve given idea to squeaky wheel manufacturers - new price will be X10 😂
One slight issue is that any dog within a mile radius is gonna go apeshit at the sound of the car! 😂
that is a plus side i would say
@@bowi73 Our dog was looking where the squeaking came from when you did it with your hands. Our old dog would have ripped the squeakers out within 5 minutes, they never lasted long with her and she was only a Bichon Frise.
We had a greyhound that went absolutely nuts when we encountered RC cars on a walk. Never saw him more excited about anything in his life. Squeaky toy RCs would have had him out of his mind with excitement.
@@williamreinhard We had a dog years ago that liked to chase my Control line planes around, not bothered when they were on the ground, similar to one of the dogs now who will try and chase my Radio Control planes again only while in the air. Seems to think she can get to the Red Kites that fly round here even if at 300 feet plus.
@@DelDredd ngl, my grandma had one of those, and they can be ferocious!
I can’t believe how good these did everywhere, especially on the crawler.
Pet supplies store: this isnt an RC car shop. this is a pet store the hell?
Thanks for that. My dog goes nuts at my rc cars. Now he's seen his squeaky doughnut on your trucks on the tv he's gone totally mad 😂!
I think you’re onto an absolute winner of a video idea here Tomley! Great work
Thanks dude
@@TomleyRCfor future ideas, i think nail clippers would work a little better, if not quicker to cut each individual spike off
There's a fine line between madness and genius. I believe you are tip-toeing one legged, down that line. Madness.
I’ll take either 😅
Rc guru is a very good friend of mine and he never ceases to amaze. Never a dull moment lol.
I promise you, as a 1 legged individual tip toeing one legged is almost impossible never mind trynna hop side to side over the line! 😂😂
pet shops: why are we suddenly sold out of dog toys? Can't keep those things in stock! hahahah
The stonks 📈
😂worked better than some brands they sell on eBay!!
Yes haha
Honestly from brushless floor mops,to squeaky dog tyres...whatever goes on in there,keep it coming!!
You made me spit coffee out my nose, Thanks Phil. I'd buy a pair, especially if they squeak. Was baffled when they performed better on the traction test in the shop.
Probably due to the rubber being a lot softer than standard tires. If you have played with any knobbly rubber toys you should know that there is a bit of flex in the knobs. But as we can clearly see, they will slip on smooth surfaces.
This is exactly what I've been trying to find for years. An RC tire that doesn't need an insert. One piece. J concepts and proline are going to see this and build them now haha. Awesome video
This was fun to watch and amazing how well they worked on the TRX4. I would love to see a video where you show up at a crawling outing with the dog toy tires. I am sure your friends would get a good laugh. You may have invented a new racing a crawling class. Great video.
Funny thing is while they might not have as much surface area width wise the little nubs are fairly soft so they can splay out and get a better grip
You need the Big Bully Breed Donut squeaky toys and put them on a 1/8 scale heavy machine. It will then really squeak. That just sounded like a random mouse fart. 😂
"Random mouse fart" what on earth are you feeding them?😂🐦.
I must do some research 😅
The added visibility is quite nice as well, could easily add a strip of LEDs inside and make them glow
The self lighting ones like in kids scooters would be a chefs kiss
Good idea!👍 🤪
Never a out of control dog when you need one but loads when you dont,lol
0:19 TOP OF THE MORNING??!!?
Ha, makes a bit of a mockery of real rc tyres costing so much. Great entertainment as always, lol. Thanks for sharing. John
Of all your awesome videos i've watched that has to be one of your best. Had me in stitches with the basher. One thing you didn't seem to pick up on though. There was hardly any ballooning of those tyres especially on the Rustler. Wonder if I can get some big enough for the Talion on Kraton 6s? 🤣
If they were painted black and then when the tread wears it pokes out purple dots. Thatd look sweet
I would have to prank them black also😅
This looks and feels like something straight outta scrap mechanic, I love this. Might need to grab a kit and do this.
I think in terms of the most simple, honest, silly fun you can have from a project, this has to be up in the top 3
My boys and I really enjoyed the morning craft time with Phil. That was an awesome and hilarious way to start our day. Thanks for that!!
Haha.. ‘Morning Craft with Phil’ could be a whole new series 😅
@@TomleyRC It'll be a huge hit! Who wouldn't want to learn how to bedazzle a lexan body from you?
This company needs to start making them in black and selling them as tires 😂
This is the coolest rc car videos ive watched. Never had hobby rc cars before but yours blow the Tyco ones i had in the 90s out the water. Great video and filmography
5:13 🐭 🐭 🐭
HAHHAHA! OMG!!!! the squeeking!!!!
that was hilarious XD
As for it being slower, it has way more rotating mass to spin up with the weight of the dog toys
@@Seegster77 you saying if you filled your daily drivers tyres with concrete (or any material of your choosing) that it would still hit the same top speed?
@@Seegster77 ah yes, the train, with an engine and drivetrain designed to move the amount that a train weighs... do you have a degree in engineering? Or physics? Because i do 😅 google rotational mass and youll see exactly what im talking about, whydo you think race teams spend so much money on developing lighter wheels, to reduce rotational mass/load, meaning increased acceleration and less drivetrain loss, meaning more top speed
Kinda ironic, hyping yourself up like that, only to be wrong @@adamwolfy4826
He wasn't slower. Changing wheel sizes always inherently comes with calibration on speedometers needing done, in any type of vehicle. Had he clocked it with a radar gun and not the app, it'd have never been said that "he was slower". They just giving degrees out or what, as that's a beyond basic level understanding you flopped on.
The bigger the diameter, the further it needs to go to fully rotate...but also, the "squeaky wheels" weigh more and are more difficult for the motors.
First thing I did was glance across to my crawler!! Gotta try this
🎉🥳🤩 I wanna this as a "new" tread pattern for tires in 1.9 and 2.2!!! But in black )
Maaaaaaaaan!!!!!!!😍
I am genuinely surprised they hooked up at the skate park enough to pull wheelies. Well done Phill, and the odd squeak really added to the video.
I want to see these with glittering lights in the wheels too LOL
Me too.🐦.
Someone should really use the material made from those into a actual rc tire brand because on the crawler it actually sounded like a actual air filled car/truck tire slipping on gravel
Phil, very cool, i think if you had them light up when they activated on impact, 🤣 😂 very cool content 😉👍🏽💯
Ok, Phil, you won the internet for today! 😂
But would those "tires" be accepted in competitions? Because, if yes, it's going to be freaking funny! 😂
Anyway, stay safe there with your family! 🖖😊
I didn't expect them to work as well as they did. The drive shaft breakage at the end was perfect. It means you had a good time out IMO.
It's slower because if you take the radious, devide by the diameter, subtract the gear ratio and plus 3.14159 for the circumference = Me not having the faintest idea what im on about!
What if you kept the squeaky on the back and use original tires on the front. Would it still work even at the odd angle.
My dogs already chase my Rc can’t imagine what would happen if i had dog toys for tire . Enjoy your content very much 😊
Acetone removes superglue, for next time then you dont have to ruin your hoodie.
More squeaky challenge please. That was hilarious.
I have 1 more idea with them 😅
Hmm? Would these stand up to high speed runs.... Next test please Tomley
"this is funniest thing I've ever done" - strong Sam Pilgrim vibe there :D
Epic cyclones with the Rustler!
I got covered in plastic lol
lol good laugh to start my morning! Cheers mate
You’re welcome 🙃
I wuz just thinking that exact same question!.. Big Tommerz answering the questions of the Masses..Bravo!😂
Doing the Lords Work
this must be how the police train the Alsatians to drive the dog vans 😂
Lol
I'm really impressed!!👍👍👍👍👍👍
Me too!
Looks great😊 and make funny noices😂
Yes, very funny
Company that makes the dog toys: Boss! we had a huge spike in sales and my projection shows a steady rise over the next 4 months!
I've got one of those blades, did you get it in a kit from poundland ?
Its where I got mine
Excellent video
4:48 I would have to guess the reason the car is slower despite the 8ncrease in diameter is because the dog toy wheels are significantly heavier than stock. This increases the amount of unsprung weight, and makes the engine work harder to get same speed. So it lowers acceleration, range, and available torque.
Small contact patch is not necessarily worse. Why I run "tall skinny" tires on the prado
Absolutely one of the best videos I’ve ever watched. The cartwheel squeaks were the funniest.
I used to Race RC inside on a smooth floor. we used to add fine silicone spikes to our tyres to get grip. when the spikes flex you get more contact.
Them tyres will be squeaky clean after that bash. HA HA HA.😊😊😊
This is neat. I've got a friend that's always tinkering with RC cars, and I'm definitely going to show him this.
Wild idea! I think the reason you have so much grip but can slide it around could be due to what mountain bikers call pass through on the tread. Looking at the tread blocks with the wheel facing you if you can see in between the blocks you have more pass through. If you see more tread blocks and less daylight you have less pass through. Most bikes run less pass through up front for grip and more pass through in back to help the rear tire slide. In a straight line no doubt you have plenty of contact. I’m surprised this isn’t an rc tire style with a proper bead.
Looked so good on the bronze wheels with the black truck
This is awesome! You made my day 👍
No worries dude
I had a good laugh at this one! Love the creative builds. It's real engineering playtime 😂
Proud moment when I saw Tye wearing your hoodie on the flat bed video of Cleetus’ , hope you got some new viewers from it.
Yeah, I sent him it a while back, and he sent some of his to me... I told him I'll owe him money if he keeps advertising it haha
Green for the money and gold for the honeys!!💥
haha
RC tire manufacturers hate that trick 😂
LMAO. Enjoyed many years of RC a long time ago. Can't wait to see those wheels at Moab Jeep Jamboree. 😂
Genius, I'd like to see what they are like at high speeds! You may need to use a wide road though. 😂
Speed reduction can be a torque thing, but it could also be the added energy needed to fling that air as those spikes are massive air paddles
Such a weird video ya loon. Next you should do some off road skateboard tires! Love the content bud, keep it up.
i have been chuckling at this idea all day. Good lord. Thanks for making the work day bearable!
get some hub spacers for the steering clearance
i mean the toys are essentially high-grade mud tires with all those spikes they have, not surprised they handle that well. Good stuff!
Oooooo that last little comment about traxxas DS 😂
Crawlers rolling down a hill with those squeak tires would be endless laughs.
I have a set of 4x4 buggy “racing” tires from the late 80’s that are very similar to those just with less spikes!
the sliding effect is the same principle as knobbly motorbike AG tyres on a road surface instead of the offroad use they were intended, the tips of the knobs walk the tyre sideways(tho on a bike it usually means wipeout)
Maybe the original tires, once ballooned, are actually a larger diameter than the squeeky toys, causing lower top speed ???
"What kind of vicious dog do you have, sir? You just bought four of these a couple of days ago."
This might just bring an old brain-fart of mine back up from the bottom of the pile. I've been musing about painting and decorating a basher in a sort of Blue-Meanie-fast-attack-vehicle fashion, you know, the psychedelic baddies from "Yellow Submarine". Blue or orange tires would fit that theme so good.
Great snow tires!
Ok, I'm gobsmacked that those things worked as well as they did. You might have started something Phil.
I had a good laugh when the dogs came and checked them out. Dogs where I am come and check your cars out anyway, this could complicate things.
Hi Phil, I really enjoyed that test of dog toy wheels. 😊 And they looked good on the TRX4.👍
🤣😂🤣😭
It squeaking on random landings had me in tears....
That off roads amazingly with the dog toy tyres on
Hmm wel wel wel... That was pretty Damm 🤭 good man and the music when you take him tru the mud and water was really beautiful (sorry for my language 💁🏻♂️ I'm from the Netherlands. Thanks for all what you do 👍🏾 but really!!! I'm saving for buggy for myself this time and not my children 😉 but it's difficult and I don't no how to do this winnings sometimes. But long message short 🤭 thanks for your hard work for us all my man 🙏
Contact area is smaller so the wheels might be spinning before you reach top speeed. Might be faster on grass tho. Cool concept anyways 🤣
I was laughing too hard at this video. Aw, men. How easily we're amused, eh?😂😂😂
that was. funny as hell. haha. surpised they worked better than some of my more expensive tires. lol
That's it I'm getting a crawler n putting dog toy tyres on it! Love the squeaks 😂
You made my morning! Brilliant Sir!
When it bounces around and squeaks, it reminds me of the meme with the little person dropping into the water and making the drip sound. 😂
Only done this on real trucks for the crawler part. What I did notice is the tall skinny tires I ran did allot better at climbing than my wider knobby tires.
Those wheels look like mudder tires, I knew they'd be good for the off road tests. They were great on the Rustler too. Fun video.
I think you found something new dude I might actually make some it just seems like the spikes are all around the tire so it has grip everywhere awesome video
Hell yeah brother! I thought I was watching Cleetus drive a Rustler for a minute. I was just waiting on the Traxxas to break before the dog toys gave up.
Hi Tomley, great video! Would you mind checking for wear on the drive shafts and diff cups. I was wondering if Rlaarlo maybe sent you a secretly upgraded version? 😬
never watched a RC video before but I enjoyed this so much lol
The bouncing reminded me of 'John ' from the GT Mongolia Special . LOL
Weirdly the lower contact patch actually probably helped with that initial slope test. Putting a lot of pressure through minimal points, so the contact point has more dig in.
Okay… those would be hilarious on a crawler tumbling down from a a rollover… I need to do this at a comp! 🤣🤣🤣