For those who can't adjust speed in +- menu when you enter the "+-" menu hold power button and + together on P1 untill screen flashes with 60kmh. The you can increase amps to 25... Other than that there's nothing you can do. Bike will top out at 27/28mph .
Hi there,very informative video,although I have a problem,my display is now stuck on P8 and the 4 digit display is flashing,I have tried to reset to factory settings as you described holding the power and plus button but no go.any advise please as my M20 won’t let me power up?Kind Regards Peter
Thx man ! I was wondering if by reducing the Amps it would lower the speed of each electric assistance stage: Like i beleive taht with the first assistance, the bikes goes up to 20/25 km/h. And i would love to like put it at 10 km/h . Is it possible you think ? or is there an option dedicated to that ?
Hi! And what happens if you set the voltage to 24? And what are the magnetic sensors responsible for? I would like to increase the sensitivity of the pedaling
Great video! Can you adjust the brightness of the screen? Can’t figure it out on mine. I mean like besides the dimming option, your screen seems brighter than mine.
Hi just wondering what settings would you recommend changing for long rides I would like to ride it for a longer time rather than speed or is it best to just use lower assist
Yea I’ve already gone through this manual as well as an older one and still haven’t been successful have reset multiple times not sure what else to try or what parameters to change have gone through every p setting 1-8 none change the amount of pas modes
I just got this a week or two ago and before understanding what I was doing I ended up just resetting to default which is what brought me to this state (bought this second hand fyi so not sure what the other guy did)
Hello, I’ve bought mine Engwe m20 750W, but I’ve got one with the manufacture sticker saying it’s 250W. I’ve contacted Engwe and they are saying that my bike is actually 750W and “The 250w mark on this sticker is only for customs clearance”. Have you guys had the same problem? And of course I can’t unlock the speed 🤨
Hi . Could you tell me please if its possible to choose 9 level instead of default 5? In other Engwe bikes with YL80C display you can have up to 9 levels and fine tune each level from 20% to 100%
I think I don't need to reduce the amps to get lower speed. Because my Engwie M20 has only one battery. I left to 13 amps. Is my was with two batteries I will leave. So I set in the P3 to 60 km and it works. I set to use all the magnetic heads and it works very well.
Someone made a video that if we hold the + button for ten seconds displays will show 63 km.. But I didn't do it yet. Cause I don't know what can happens later.
I have the same controller, but when I go into the advance settings, it goes to P0 and I can’t advance it past that it has four numbers I can change at the bottom to start off at 000 but I can’t get into the advanced settings for the real size and changing the speed
I have the same display but on a different ebike. My settings are set at P0 and 4 0’s underneath that. Is there any specific number combinations? The bike company isnt very responsive
I don't see a setting for disabling the Pedal assist. You could dry to disconnecting the cadence sensor on the pedal crank at the controller to see if that works
I can't adjust my speed higher than 25kmh, and I can't get the bike to work in throttle only mode. I've tried all suggestions in videos etc. hope you can help
I got mine yesterday and can’t adjust that either. The plus & minus buttons do nothing on that section. I’ve emailed ENGWE and they said to do factory reset which I’ll try when home.
@@kherber1 I’ve emailed them and sent them the video of me trying to unlock the speed and they’re sending a new digital screen. When you go into the P3 settings, do the plus & minus buttons do nothing like mine? It’s strange as they work in the the other sections of the menu.
Anyone know what the wheel setting should be? the diameter of the tire or just the wheel? Cause it is set to 26" from the factory, but the wheels are 20"
adjust wheel size to speedometer accuracy. Use GPS app on phone to confirm. I set mine to 22" which waqs accurate lower speed and high speed off by 2 mph
Does anyone know about "P8" - my display shows only "P8" and seems to be asking me for a 4-digit PIN code. I'm trapped on this screen and my ENGWE display is not activating the bike at all. I think I may have accidentally activated a PIN lock screen on my first ever ride on it because I was 10 miles from my house and couldn't remember how to switch the front and rear lights on. So I started pressing all kinds of + / - key combinations and + & - simultaneously - that displayed a flashing choice of P1 to P8 options. At P8 there was a no / yes question so out of curiosity I pressed "Y" for yes. After that the display refuses to let me move beyond this damned locked P8 screen that seems to want me to enter a 4-digit number. There's nothing about these P1-P8 screen displays in the user manual and nothing about PIN codes and what seems like a screen lock. So - has anyone had this P8 problem? Do all ENGWE ebikes have a unique PIN code ? Can I factory reset it to get rid of this screen lock that I've accidentally activated? Paul G
@BRichSolution I seem to be way ahead of you - below is a short RUclips vid posted by someone who has the exact same problem with his ENGWE M20 which has a display/functions which are 100% identical to my ENGWE P1: ruclips.net/user/shortsw_1AD9fynrI?si=4K5mgYdbeBOWB-WT Many of his desperate comment-posters there still have the same problem. PS. Why do you suggest "1234" and "1111" - have others successfully tried those 4-digits with this specific ENGWE PIN lock problem?? As for contacting customer support - of course I sent ENGWE a full description(last night, Sunday) and a broader complaint about the non-existence of an ENGWE P1 Display user manual(ie. pdf file) - and they've promised to get back to me... Paul G
Hello, im here in Naples, Fl and i was wondering how much you would be willing to sell your fully upgraded RSF650 street bike for. I am very intrested in buying one of these, i just dont have the time to order all the parts and build the bike itself.
I managed to lock myself out on P8 , the release code is as advised 1212 however despite several frustrating attempts over some 30 minutes the code was not accepted. Then suddenly the unit decided it was right & allowed me to reset. Seems there is some kind of inherent fault.
I think i changed the password setting and now its coming on but is stuck on p8 and when i hold power button and the + its not giving the option to factory reset,??help please
i face problem with the speed and distance indicator. i am cycling with 39 -45 km/h and shows 0. Engwe send me a new controller but ALL THE SAME. Could anyone help, pls???
Interesting. I wonder where it gets the speed from? Its not the cadence sensor on the crank as mine went bad. It must be a signal inside the rear hub motor? What did Engwe say?
I don't know probably the sensors are inside the motor... and Engwe is sending me a new motor.... i am waiting 12 days so far... probably it will need 15 days more to wait, the same days as i was waiting the controller that they send me.@@BRichSolution
Ask Engwe. The manual does not allow for user to configure PAS mode. Maybe disconnect the cadence sensor on the crank from the controller? Full user manual myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
E30 is communication error according to manual see link below. Check the connector on the wire harness. Disconnect the connectors and reconnect to ensure they are seated. Did the bike get wet? myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
Sorry man .. i Didnt know the p8 button .. and maybe clicking no paing attention IV changed the default s password.. how can i do ?? The bike Is blocked on P8 0000
@@BRichSolution thank you so much.. I solved .. Actuallt, in my ignorance, i set the time on the p8.. I rember that was 18:42.. So i out those pass and the e bike unloncked.. I was really scared.. Anyway ,still i cant do the reset.. Hope that i won t Need 🤣
@@BRichSolution how do you turn the head loght of ? I have held the "light on button for 2 secs ) as instructed but I can't seam to turn them off now😂 I've tried holding the light on button for 2 secs , also tried the light button by the horn ... im stumpped🥴
Thank you you helped me finally set up my bike don't forget if you lock your bike in p8 by accident you put 1212 and it bypasses to set it up again
Thanks for the feedback
tnx man i was fucking up with the password and didn’t remember that ..after starting reading the cmnt i got u😂❤️
I need help!
What's up
Which button is bypass I don't know bypasses my cycle is stock because of P8 😢😢😢 seriously I am like crying 😭
Thanks for running through the controls on the engwe m20 very helpful information.
Glad it was helpful!
Legend for this video I couldn’t find this anywhere what the settings actually do like P6 but you explained perfect thanks 🙏
Glad it helped
For those who can't adjust speed in +- menu when you enter the "+-" menu hold power button and + together on P1 untill screen flashes with 60kmh. The you can increase amps to 25... Other than that there's nothing you can do. Bike will top out at 27/28mph .
Thanks for the info!
Mine was going 33 then I took it to the bike shop to a popped tire and when I git it back it won't go past 25 miles a hour
Doesn't work
Hi there,very informative video,although I have a problem,my display is now stuck on P8 and the 4 digit display is flashing,I have tried to reset to factory settings as you described holding the power and plus button but no go.any advise please as my M20 won’t let me power up?Kind Regards Peter
Try password 1212 if that doesn’t work reach out to manufacturer or seller
@@BRichSolution cheers Bro worked 1st time,much appreciated 👍
Thanks for the help bro...
Happy to help
Hello, the sensory speed make faster to reach 25km/h when u pedaling?
Yes
I must to make it lower or higher than 12? (My currently is 12)
Very helpful,
if I wouldn't have tried this already.,.
The thing is, pushing + and - simultaneously doesn't open this illusive settings changer.
sometimes if you push one button first and not simultaneously it will not enter advance menu
Cool. If you could upgrade or do something for the display. The buttons so small when you want to change from 1 to 5 during driving
I agree PAS + and - too small. Sold the bike and bought a faster Ridstar Q20 with mote comfortable seat too
Thx man ! I was wondering if by reducing the Amps it would lower the speed of each electric assistance stage: Like i beleive taht with the first assistance, the bikes goes up to 20/25 km/h. And i would love to like put it at 10 km/h . Is it possible you think ? or is there an option dedicated to that ?
Yes lowering the amps & speed the range will go way up
Hi! And what happens if you set the voltage to 24? And what are the magnetic sensors responsible for? I would like to increase the sensitivity of the pedaling
Not sure… I did set volts once to 36v to extend my range on long rides but it cycles the battery below BMS
@@BRichSolutionwtf I put mine on 36v 25amp and the controller exploded
@@thertsr9999😂now you gotta get a new bike
Hello, my friend, I bought a bicycle and after I tried to my bike settings. Now the bike screens are paused at (P8) How can I get out of the P8?
Shut battery off and restart
Great video! Can you adjust the brightness of the screen? Can’t figure it out on mine.
I mean like besides the dimming option, your screen seems brighter than mine.
I think mine looked brighter cuz it was in a dark garage. I can only dim the screen one setting; see video at 1:06
Hey man thanks for the video. Would you know if these settings be okay for my Engwe L20? Looks the same display controller
yes same setting apply to L20
@@BRichSolution Thanks so much 👍
Is there any way I can limit the speed the throttle can output as in germany the throttle is only allowed to go up to 6kmh?
Not that i am aware of. I would disable the throttle or unplug it and use walk mode for 6km/h
@@BRichSolution thank you in p3 I put the speed to 25kmh but it still goes 30+ on Pas 5 I dont know what to do
Great video, thank you
Glad it was helpful
Hi just wondering what settings would you recommend changing for long rides I would like to ride it for a longer time rather than speed or is it best to just use lower assist
Change the max amps from 22A or 20A to 15A to prolong your range
@@BRichSolution thank you so much for your reply
My new US version of the M20 only goes up to 40 for the highest speed adjustment in the display. Does the changing of the AMPs really do anything?
Were you able to confirm the speed with gps app? I have a ebike says I am doing 37 but confirmed with GPS app showed 32 mph
@@BRichSolution I edited it. It only goes up to 40 on the display for adjustment vs the 60 I keep seeing on the videos.
My bike initially had 8 pas modes after some messing around now I can only reach 1-3 any idea how to adjust back?
See user manual and worst case factory reset see section 3.2 myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
Yea I’ve already gone through this manual as well as an older one and still haven’t been successful have reset multiple times not sure what else to try or what parameters to change have gone through every p setting 1-8 none change the amount of pas modes
I just got this a week or two ago and before understanding what I was doing I ended up just resetting to default which is what brought me to this state (bought this second hand fyi so not sure what the other guy did)
Hey thanks for the video but my question is you had the tire diameter at 23. Shouldn't it be 20 since they are 20x4 tires?
23” is the outside tire diameter of the 20x4 wheel
@@BRichSolution ohhhh. Ok thanks 😅
Can you change the speed limitation on the EU version of the bike?
Yes, but with 250W motor doubt you can go more them 32 km/h
Hello, I’ve bought mine Engwe m20 750W, but I’ve got one with the manufacture sticker saying it’s 250W. I’ve contacted Engwe and they are saying that my bike is actually 750W and “The 250w mark on this sticker is only for customs clearance”. Have you guys had the same problem? And of course I can’t unlock the speed 🤨
Can’t unlock it? Does the screen have a passcode? If so try 1212 or ask engwe for passcode
Hi,
How to disable completely the light ?
Disconnect the headlight cable
Hi . Could you tell me please if its possible to choose 9 level instead of default 5?
In other Engwe bikes with YL80C display you can have up to 9 levels and fine tune each level from 20% to 100%
Im not sure… I sold my Engwe as seat was uncomfortable and bike was too slow
Hello just want to know that i want to reduce the speed is that ok or i should Reduce the amps also
Ya reduce amps will lower speed and increase range
I think I don't need to reduce the amps to get lower speed. Because my Engwie M20 has only one battery. I left to 13 amps. Is my was with two batteries I will leave. So I set in the P3 to 60 km and it works. I set to use all the magnetic heads and it works very well.
Someone made a video that if we hold the + button for ten seconds displays will show 63 km.. But I didn't do it yet. Cause I don't know what can happens later.
Sir my cycle stuck 😞 in P8 how to get back normal screen
I have a question can you turn down the light of the front totaal down ?
The headlight swivels on the bracket so you can adjust the beam down
Thanks for replaying ,
But can you turn the lights totally down wil the bike is on
I have the same controller, but when I go into the advance settings, it goes to P0 and I can’t advance it past that it has four numbers I can change at the bottom to start off at 000 but I can’t get into the advanced settings for the real size and changing the speed
Ask engwe for the passcode
Is this display compatible to s830 display
Not sure
Not sure
I have the same display but on a different ebike. My settings are set at P0 and 4 0’s underneath that. Is there any specific number combinations? The bike company isnt very responsive
I believe that is password to lock settings
@@BRichSolution okay cool so im assuming the bike company will be the ones to help me figure out the 4 digit code. Thank you
Hi how I change into just power without assistance????
I don't see a setting for disabling the Pedal assist. You could dry to disconnecting the cadence sensor on the pedal crank at the controller to see if that works
Do you have any changes on the throttle ?
upgrade throttle - half twist is safer
ruclips.net/video/T5ZfQZTP04U/видео.html
Hi when my m20 is in p3 setting it will not show me a number underneath just two lines flashing
Not sure ask Engwe
@@BRichSolution thank you
I see a Bluetooth logo on my screen, what does that do ?
I am not sure maybe for future use or programing at the factory
I can't adjust my speed higher than 25kmh, and I can't get the bike to work in throttle only mode. I've tried all suggestions in videos etc. hope you can help
I got mine yesterday and can’t adjust that either. The plus & minus buttons do nothing on that section. I’ve emailed ENGWE and they said to do factory reset which I’ll try when home.
Ask Engwe support they are helpful
cheers anyway I will keep trying. Engwe respone has been to just send me links to RUclips video. Engwe uk don't seem to be mega helpful so far
@@kherber1 I’ve emailed them and sent them the video of me trying to unlock the speed and they’re sending a new digital screen.
When you go into the P3 settings, do the plus & minus buttons do nothing like mine? It’s strange as they work in the the other sections of the menu.
@@acp2681I have same problem. If u fix it let me know pls
Как настроить другой датчик pas ? Хочу установить на 6 магнитов
Why 6 magnets?
@@BRichSolution у меня стоит датчик pas на 12 магнитов, нового купить,его нет. Есть возможность выбора 6 вместо 12? Можно настроить дисплей?
Anyone know what the wheel setting should be? the diameter of the tire or just the wheel? Cause it is set to 26" from the factory, but the wheels are 20"
adjust wheel size to speedometer accuracy. Use GPS app on phone to confirm. I set mine to 22" which waqs accurate lower speed and high speed off by 2 mph
Does anyone know about "P8" - my display shows only "P8" and seems to be asking me for a 4-digit PIN code.
I'm trapped on this screen and my ENGWE display is not activating the bike at all. I think I may have accidentally activated a PIN lock screen on my first ever ride on it because I was 10 miles from my house and couldn't remember how to switch the front and rear lights on. So I started pressing all kinds of + / - key combinations and + & - simultaneously - that displayed a flashing choice of P1 to P8 options. At P8 there was a no / yes question so out of curiosity I pressed "Y" for yes. After that the display refuses to let me move beyond this damned locked P8 screen that seems to want me to enter a 4-digit number.
There's nothing about these P1-P8 screen displays in the user manual and nothing about PIN codes and what seems like a screen lock.
So - has anyone had this P8 problem?
Do all ENGWE ebikes have a unique PIN code ?
Can I factory reset it to get rid of this screen lock that I've accidentally activated?
Paul G
Try 1111 or 1234 if they do not work contact Engwe
@BRichSolution I seem to be way ahead of you - below is a short RUclips vid posted by someone who has the exact same problem with his ENGWE M20 which has a display/functions which are 100% identical to my ENGWE P1:
ruclips.net/user/shortsw_1AD9fynrI?si=4K5mgYdbeBOWB-WT
Many of his desperate comment-posters there still have the same problem.
PS. Why do you suggest "1234" and "1111" - have others successfully tried those 4-digits with this specific ENGWE PIN lock problem??
As for contacting customer support - of course I sent ENGWE a full description(last night, Sunday) and a broader complaint about the non-existence of an ENGWE P1 Display user manual(ie. pdf file) - and they've promised to get back to me...
Paul G
Hello, why in my unit only P0 with 0000 lightening ? thanks
Not sure.. can you change it 0000?
How do I remove the lag when puling the throtal
Not sure… maybe one of the settings allows you yo adjust lag. Mine doesn’t have lag. Ask Engwe customer service
Why does mine says _ _ on p3 settings? How do i fix that
Ask engwe for the password
M20 dual bat. When I go to the advanced settings, on P3 it doesn't let me increase the speed, it always stays at 25 km.. can you help me?
Ask engwe for password to unlock the bike
@BRichSolution I can move and change all the menus, except the speed one
@@kinyo_evosame did you fond a solution yet?
Hey, yes, it's finally unlocked
@@kinyo_evo How?
How does your go to 25 and mine go to 20. I want the extra 5 on mine. Please help
make sure P03 is set to 60 kmh and P06 is set to 25 amps
Hello, im here in Naples, Fl and i was wondering how much you would be willing to sell your fully upgraded RSF650 street bike for. I am very intrested in buying one of these, i just dont have the time to order all the parts and build the bike itself.
I sold it 6 months ago someone offered me $1350 for it. I could build another one if needed
I managed to lock myself out on P8 , the release code is as advised 1212 however despite several frustrating attempts over some 30 minutes the code was not accepted.
Then suddenly the unit decided it was right & allowed me to reset. Seems there is some kind of inherent fault.
Interesting and thanks for the feedback
What's Max's mode?
Pas mode 5
Author, thanks for the video.
How to remove speed limits?
My ENGWE O14 bike travels at a top speed of just 26 km/h.
Try passcode 1111 if that does not work then contact Engwe
@@BRichSolution You can find out more about exactly how to do this! and where to enter this password?
@@BRichSolution Thank you. Can you be more specific about where and how exactly this code should be entered?
i have a different bike with this same display and it’s stuck on p1 how to i unlock it?
Ask seller for unlock code. Try 1212
@@BRichSolutionhow to i punch in unlock code?
@@BRichSolutionplease reply
How can i turn off the light? Do i need disconect the wires?
There is headlight button. Or you referring to small light bar jn head light for safety? If so you can turn off
I have the same problem. I want to turn off the light. Can you help me?
I accidently sent a password on the display and can't remember what I put it as. Is there a way to reset it or something?
Ask seller or manufacturer
hello how do i reset this display?
See section 3.2 on manual fot reset display
myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
No alarm or key/passcode for this bike?
Not on this bike. I heard passcode is 1212
Why is the battery sign on my display not there?
Not sure
See how to unlock the full power of this bike - Enegwe P1 - new models - ruclips.net/user/shortsnNEdpEEmtbk?si=qTPty4NpYOC9yn8C
Thanks
I lived in p3, it goes up to 25 km
Okay
why does mine only go up to p7? I don't have p8
Not sure ask seller or manufacturer?
I think i changed the password setting and now its coming on but is stuck on p8 and when i hold power button and the + its not giving the option to factory reset,??help please
See user manual section 3.2 for factory reset myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
Sir I have the same problem now please help
Please explain me how you come out from P8 I am still stuck 😞😢
Mine only goes up to 40 how do I make it go up to 60
45km/h is the max you can get with 48V and 750w hub motor
i face problem with the speed and distance indicator. i am cycling with 39 -45 km/h and shows 0. Engwe send me a new controller but ALL THE SAME. Could anyone help, pls???
Interesting. I wonder where it gets the speed from? Its not the cadence sensor on the crank as mine went bad. It must be a signal inside the rear hub motor? What did Engwe say?
I don't know probably the sensors are inside the motor... and Engwe is sending me a new motor.... i am waiting 12 days so far... probably it will need 15 days more to wait, the same days as i was waiting the controller that they send me.@@BRichSolution
How do I get it off pedal assist ?
Ask Engwe. The manual does not allow for user to configure PAS mode. Maybe disconnect the cadence sensor on the crank from the controller? Full user manual myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
@@BRichSolution Thanks yeah its the same manual you get with the bike.
@@BRichSolution I got it working thats it in full throttle mode 😍
🙏🙏🙏
Thanks
Does anyone know how to fix error 30?
E30 is communication error according to manual see link below. Check the connector on the wire harness. Disconnect the connectors and reconnect to ensure they are seated. Did the bike get wet? myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
Sorry man .. i Didnt know the p8 button .. and maybe clicking no paing attention IV changed the default s password.. how can i do ??
The bike Is blocked on P8
0000
My default was password was 1212. You can do a system reset see video to unlock
@@BRichSolution thank you so much..
I solved ..
Actuallt, in my ignorance, i set the time on the p8..
I rember that was 18:42..
So i out those pass and the e bike unloncked..
I was really scared..
Anyway ,still i cant do the reset..
Hope that i won t Need 🤣
@@BRichSolutionhaw do I do a system.reset because I'm stuck at p8 ? Thanks!!!
Please help me I have the same problem now 🙏😢
I have the same display but mine goes to p19
Interesting
Hello bro, you know how to remove the password, I was touching some things and by mistake I activated it and I don't know what it is. Thank you
When I turn on the bike directly, I'm in the password menu and I can't restart it from the factory
I already got it, don't worry 🤣🤣🤣🤣
As seller manufacturer for password
When i turn on there is p8 on password what can to do?
Try 1212 if that does not work then as Seller or Engwe
@@BRichSolution ok thanks
Hi,
On my M20 bike i can't change with the +/- the speed limit.
Do you maybe know how to resolve this problem?
Not sure… contact engwe
My engwe m20 won't let me increase the maximum speed. because?
Do you have 250W or 750w motor? If 750w ask engwe for password
750w but I can't delimit it. How could I do it?
@@BRichSolution ruclips.net/video/-qsE1sPLWQM/видео.htmlsi=3yZj8YpYaeHm9QXZ
ruclips.net/user/shorts-qsE1sPLWQM?si=pHw5sIph-Lbnv9tm
I need help pleesee!
I am still have problem because is still in P1
P1 is locked?
Hello
P3 is not working it's on 25 not increasing and not reducing
reach out to Engwe for solution. Do you have 250W motor or 750W motor?
at p3 it stops 25 km
As manufacturer why?
I dont now how to hack
Please help me
What is the issue? Do factory reset by holding power and + button for 3 seconds
I accidentally left my battery on for a week now my battery indicator doesn’t work
Charge full then try it again
It will not let me resest it
see pg 11 of manual for password reset; link is here myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
I have no peddle assistance
contact Engwe for new cadence sensor. I had this happen on another ebike and had to replace sensor to regain PAS
the manual didn't explain any of this and now I'm locked out of my bike...
try factory reset outlined at 4:04
@@BRichSolution hi I have done the same with p8 setting and don’t know the password
@@JamiePaterson-q9p paswword is 1212
1212
@@BRichSolution how do you turn the head loght of ? I have held the "light on button for 2 secs ) as instructed but I can't seam to turn them off now😂 I've tried holding the light on button for 2 secs , also tried the light button by the horn ... im stumpped🥴
Hello, P6 must be 20. Because of a controller maximum is 20 Ah. At 25 maybe heat your controller.
Yes it won’t take more than 20a
est ce qu'il peut etre en dessous ?