13:15 Bass adapter. My Mk3 was working flawlessly on October 22. I switched from the .30 barrel to the .22 so I could compete locally. November 3, it started snowing. We had snow on the ground for another 5.5 months. Gun was stored in the case. I opened the case in April. Was saddened to see no pressure. Pumped it up but I could tell it was leaking. I could put my finger over the counter sunk area of the Bass Adaptor apply pressure and release and could feel it pop a little. I didn't know what it was called, how to safely empty the gun or what to do but thanks to this video, I do now! Thanks Ernest.
Thanks Ernest, waiting for my Impact to arrive - now I don't have to take it apart to satisfy my curiosity as to what is inside - you have shown me already!
Thank you, would be nice to have scheme of seals installation and undesrtanding how often they should be replaced. Do you have any maintenance schedule, operational requirements?
My FX impact mkIII is leaking around the bottle adapter in video you said it was torque down so if I need to fix the leak is it ok to remove it myself and what is the torque setting for it
Im about to do a disassembly because for some reason, the hammer adjuster hex screw assembly is completely loose! It can slide back n forth with a flick of my finger. Any tip on what part ciuld have come loose or broken?
Hi there Ernest I have a question about the mkii pp working pressure valve I want to put in mine a New botle in 350cc and 4500 psi the question is can use this botle at 4500psi or 4000 psi or not? Im glad to learn here. Have a nice day
@Bo Lorentzen Degas your gun then go to the 8:50 mark. Just take off the trigger guard and screw it out. You will need to replace it with a new one. These have a check valve built in and can be repaired though. This might work: ruclips.net/video/IlJk5MmZQgA/видео.html
Can you bleed the the regulator same way on the crown by turning the reg.adj.screw?...and if, does it need to be adjusted to specific bar setting (like 135bar like mine is) during the refilling?
thank you very much... no service center for fx impact in my country, so this is a big big help.... question, is there any list of spare parts that is prone to broken over time? may need those in hand when buying fx impact, since again no fx impact service center in my country...
There was a leak in my impact, then found it from part A24 19694 (brass screw), I tried to take it out to replace it and, I destroyed it and it still in its place!!, I can't remove it, what should I do?
Master... I have the Panasonic driver like yours, Can you tell me where to get the metric allen key bits that you use with it. I'm looking for the same ones that will lock into the Panasonic driver Collet. Thanks.
What are you trying to do?? Show your face or teach how to disassembly the gun??? I do not want to see your face!! Top view is nice but do not show details. If try to show an o'ring far away, I just see you but nit the parts you try to show. 85% of the video lost in bad takes. Get close views to the disassembly process in detail and we can really learn what you try to teach!!
13:15 Bass adapter. My Mk3 was working flawlessly on October 22. I switched from the .30 barrel to the .22 so I could compete locally. November 3, it started snowing. We had snow on the ground for another 5.5 months. Gun was stored in the case. I opened the case in April. Was saddened to see no pressure. Pumped it up but I could tell it was leaking. I could put my finger over the counter sunk area of the Bass Adaptor apply pressure and release and could feel it pop a little. I didn't know what it was called, how to safely empty the gun or what to do but thanks to this video, I do now! Thanks Ernest.
Fixed it! There was a metal sliver in the o-ring. I bought one of those FX O-ring kits. Back in service!
Thanks Ernest, waiting for my Impact to arrive - now I don't have to take it apart to satisfy my curiosity as to what is inside - you have shown me already!
Way farther than I ever hope I need to dive 😅 but I know the day will come and I'll be thankful for this video!
🥃cheers🍻
Fantastic ! An interesting topic for another video would be addressing common trouble areas with the rifle and how to solve them.
Just wanted to say. With the exception of "modified" vise grips, very tool friendly. Not a machinist but been around the trade. BUTEFUL! (SP NOTED).
Thank you, would be nice to have scheme of seals installation and undesrtanding how often they should be replaced. Do you have any maintenance schedule, operational requirements?
ufff I need to see this video at least 5 more times! what a great info, very complicated air gun (for the most accurate one)
Complicated a lot
Is there video for the impct mk2 with power plenum? Or basically same as this video
Can’t imagine Air Arms showing you how to disassemble one of their guns and then inviting you to tune it up 😄
Air Arms doesn't have to show you how, Their guns are so much more simple and better built
shawn Debatable. Also no, it’s just that because of the complexity, it requires you to be careful. It’s like a Mercedes.
Thanks master, now we expect the same from FX Crown!
very good video when i buy mine i will know how to move
Ernest muito bom este tutorial de como desmontar a IMPACT
It's not a trigger shear ....the correct term is sear.
A great set of videos. Have watched them all
Neil
.25 impact owner.
where or how can we make that removal tool for the reg?
Watching this now I'm sure I'll never be able to re assemble it again 😉😊🙏
Great video Ernest, what size Allen key's do you need for the full strip down? Many thanks, Tim.
A donde puedo llevar mi fx impact x, para revisarlo? Por que ya perdió potencia
Your dealer should be able to help you out with that .
Hi Ernest, how do you charge the plenum after you scree back on the bottle?
My FX impact mkIII is leaking around the bottle adapter in video you said it was torque down so if I need to fix the leak is it ok to remove it myself and what is the torque setting for it
Can you please show me the detailed drawing?
Im about to do a disassembly because for some reason, the hammer adjuster hex screw assembly is completely loose! It can slide back n forth with a flick of my finger. Any tip on what part ciuld have come loose or broken?
Well done. I can see you've done this more than a few times.
1:23 My valve is unseat how do I fix it
عالیه ای کاش از روش پاور پرنیوم هم باشه
What drill is that with what bit
Forgive my ignorance, but it's this the Mk2 or Mk3?
How to know which generation corresponds to my regulator?
Hola que tal, tendras algun fx impact Mk2 en venta Saludos buen video...
En que pais vives ?
Hi there Ernest I have a question about the mkii pp working pressure valve I want to put in mine a New botle in 350cc and 4500 psi the question is can use this botle at 4500psi or 4000 psi or not?
Im glad to learn here.
Have a nice day
Um equipamento extraordinário porem para nós aqui no Brasil ela tem um preço muito alto.
Hey Ernest, how do I rebuild the FOSTER fill valve?
@Bo Lorentzen Degas your gun then go to the 8:50 mark. Just take off the trigger guard and screw it out. You will need to replace it with a new one. These have a check valve built in and can be repaired though. This might work: ruclips.net/video/IlJk5MmZQgA/видео.html
Can you bleed the the regulator same way on the crown by turning the reg.adj.screw?...and if, does it need to be adjusted to specific bar setting (like 135bar like mine is) during the refilling?
thank you very much... no service center for fx impact in my country, so this is a big big help.... question, is there any list of spare parts that is prone to broken over time? may need those in hand when buying fx impact, since again no fx impact service center in my country...
Great sir
how do you degas the bottle
I would like to buy this airgun. But I am from LAOS. How can I but it?
You can find our international retailers at our website, FXAirguns.com/retailers
Great video.
Also it would be nice to make video for comlete disassembly of Crown barrel.
We have an Impact X barrel video in the works.
@@FXAirguns Great news👍
Do you manufacture the .177 impact with smooth bore
How much is it? And how to buy? Sb shows me, plz
Does the impact come with a spare set of all the rings?
No, they do not, you can order all O-rings from FX USA by calling (866) 639-0772
For $2000+ USD, they should come with a spare set.
@@CDOO2391 yep I agree. I bought mine 6 months ago and the probe catches on the mag. Got to take the probe out and file it down 🙄
Well made Gun!
Waaaoow fx impax😍😍
Carabina muito bom nota de mas eu creio que ela é muito ponte
There was a leak in my impact, then found it from part A24 19694 (brass screw), I tried to take it out to replace it and, I destroyed it and it still in its place!!, I can't remove it, what should I do?
At 7:11 i was thinking " What if Fx made an Fx impact pistol with an x barrel with a 10 shot mag at 30 ft lbs?
30 ft lbs on an air driven pellet through a 5" barrell???... Fredrik is good but not that good!
brilliant
Master... I have the Panasonic driver like yours, Can you tell me where to get the metric allen key bits that you use with it. I'm looking for the same ones that will lock into the Panasonic driver Collet. Thanks.
thorp mip makes the best tips....also snap on tools have some good tips, i prefer mip's though (any rc hobbyshop will have them)
Can you send your Item Here in the Philippines when im going to order it?
How much is this
FX should make orings kits to change every oring in the gun.
I bought a full O ring kit for mine.
@@Hipporider Yes I have seen some on EBay.
Price dis fximpact?
สุดยอดครับชอบมากครับfx
Me podrás pasar tu correo para una consulta sobre el regulador de wildcat MKII
Is it legal to carry these airguns on aeroplane?
Do you have distributors in India?
How can we buy FX air rifles in India?
the very no.
How many.???
How much is the brother? Can you transport to vietnam? I like it.😍😍
اتمنى لو تكون الترجمه بعدة لغات ليستفيد الجميع بدون استثناء
I want to buy goods to Vietnam, what to do
I would stop at 5:30.
Clear Front view from the beginning will be more great tutorial..
Thanks for the feedback, will work at better angles to see everything.
Holy crap. Hope I never have to do this to my impact !!
I want classic ph made airguns
Sonho de consumo
👏👏👏
Its is dancook
Ask uncle sniper please😢
Helo vietnam
More detail needed... camera work is not showing everything that is being done clearly enough
Yo qiero una pero soy de republica dominica
I am very passionate but I cannot afford to buy. I can help you
No wonder what it keeps leaking air !
See it it's the Foster fitting: ruclips.net/video/IlJk5MmZQgA/видео.html
Fx air gun how mash rupish
Hi$$$$
You took apart a new gun and things were loose on it already tells me to stay the hell away from this gun
What are you trying to do?? Show your face or teach how to disassembly the gun??? I do not want to see your face!! Top view is nice but do not show details. If try to show an o'ring far away, I just see you but nit the parts you try to show. 85% of the video lost in bad takes. Get close views to the disassembly process in detail and we can really learn what you try to teach!!
Helo daoloa vn ok
i don't want to see your face, show me more of how to disassembly it
and these few parts costs 2k. € !!!
:)
dont do that at home >>>>>.
Это не Русская винтовка .