E46 M3 Stoptech BBK install - DIY

Поделиться
HTML-код
  • Опубликовано: 30 сен 2021
  • Today we are installing a set of Stoptech ST60 front and ST40 rear brakes for the e46 m3.
    #m3 #stoptech #bbk
  • Авто/МотоАвто/Мото

Комментарии • 19

  • @tailopez5106
    @tailopez5106 2 года назад +4

    Your e46 looks killer! Especially with those lmr and stop techs

    • @MunichVenom
      @MunichVenom  2 года назад

      thank you, it really transformed the car and the stopping power with the BBK is so good. A huge upgrade over stock

  • @bcgandrewej8
    @bcgandrewej8 2 года назад +1

    Looks great!!

    • @MunichVenom
      @MunichVenom  2 года назад

      Thank you, Andrew!!! such a huge upgrade

  • @mrgizmo7975
    @mrgizmo7975 Год назад +1

    When you say you lost stock brakes on track, what pads/fluid/tires was that on?

    • @MunichVenom
      @MunichVenom  Год назад

      I was on stock pads/ fluids while running michelin pss tires. By the end of the track day I burned through a fresh set of pads. Being able to swap in some motul brake fluid was the only reason we were able to continue having fun without having to leave but I did not push the car anymore that day since I did not have the confidence in the brakes anymore for good reason

  • @ch1c0h
    @ch1c0h Год назад +1

    Do you have to buy anything extra for the ebrake to fit on larger rotors?

    • @MunichVenom
      @MunichVenom  10 месяцев назад

      You do not have to buy anything extra to keep the ebrake working. Stoptech has two different rotor hats and the ones I got are intended to keep the ebrake assembly intact

  • @Loopyspec
    @Loopyspec 2 года назад +1

    Do you plan on adding bucket seats?

    • @MunichVenom
      @MunichVenom  2 года назад

      Yes, the plan is to install some bucket seats but I have not decided on which ones I want. The seats I really wanted are practically impossible to get at this point.

  • @martsmarts
    @martsmarts 3 месяца назад +1

    Hi, do these fit on a non M e46? For a 330ci

    • @MunichVenom
      @MunichVenom  Месяц назад

      Stoptech does make specific ones for non-m models. You just have to look it up under your model and it’ll show you all of the options available

  • @gio_ziraqa
    @gio_ziraqa 2 года назад +2

    How much did it cost?

    • @MunichVenom
      @MunichVenom  2 года назад

      It was like 9.3k with tax and shipping

    • @gio_ziraqa
      @gio_ziraqa 2 года назад +1

      @@MunichVenom bruh... I bought whole m3 for 8k 😅😅 its not bad btw 😉

    • @MunichVenom
      @MunichVenom  2 года назад

      That was why I was always so hesitant to buy a bbk. But I’ve lost my stock brakes at the track before and that was a big reason why I was willing to upgrade to a bbk. Just piece of mind knowing when I stomp on the brakes they won’t ✌🏽

    • @MunichVenom
      @MunichVenom  2 года назад

      There are some good deals to be had with the m3s. Even though a lot of them are selling for ridiculous prices nowadays

  • @darrenboston342
    @darrenboston342 Год назад +1

    Seems that whenever anybody fits a BBK them seem to become butchers!
    What’s with the rear brake shield ffs🤔🙄
    Pop the rear brake shoe assembly off, unbolt & do a job properly ffs!🙄
    I’ve got the AP racing radical calipers on mine, took the time to remove the shields in the correct manner tho… unlike some!🙄

    • @MunichVenom
      @MunichVenom  Год назад

      Lmao if you say so buddy. I did have it off but if you actually looked at your work you’d see the ebrake assembly becomes exposed which will end up with issues down the line but ok 👌