Sir with your series of videos I've replaced my head gasket and I'm in no way a mechanic!! You have every detail!! Need more ppl like you sir! Before I found your videos I saw one that said "Ok on timing listen very carefully***Bam!! Music montage *** Lol so yes sir I think I've hit like on all of your videos and subbed..Excellent Work!!
Thx. Curing time for the liquid gasket material? I install the cover flush but finger tight. Wait 1 hr then torque to specs. Used permatex optimum Grey.
2010 Toyota Corolla repair manual said to release tensioner hook turn crankshaft to counterclockwise then clockwise. Now I have 2016 Toyota Corolla 2xr-fae should turn clockwise to release the hook in the beginning?this is another youtuber told me to turn clockwise to release hook.i dont feel to open engine cover and i dont have camera,and you need to buy new engine cover gasket too and extra.
Peter, I have a question. Why wasn't the cover cleaned of all old silicone before installation? I like your videos, great content, excellent footage... but what is up with the crazy amount of silicone?? It's too much and looks messy...
hi, when you install silicone on timing chain cover does any ofthe hole is an oil hole, i assume all holes are for the bolt and not oil passage, becausee silicone can cover the oil hole
also when you rotate the engine after aligning the timing mark on chain , will the timing mark on chain align again when i bring the no 1 cylinder to tdc. in case of timing belt mark on belt wont align after the 1st rotation. is same true fo timing chain
Hello dear friend. My Corolla 2017 dual VVTi 1.33 has vibration issue at idle when engine is warm. This started after change battery. It's just on 28000km and no LPG kit. And it has a strange "tick tick"sound. why this can happens?
Commenting on this video is FREE, but if you have technical questions for me, I charge a small fee for answering them, normally 5 USD $ per question. I am a true Technical Professional, Black Belt in engineering and The Car Doctor! Enjoy and ask. I'll answer professionally. So, if you have question: You pay 5 USD $ via the THANKS button below the video to me. Add user your name to text line. Make the payment and I will then give you a professional answer.
Sir with your series of videos I've replaced my head gasket and I'm in no way a mechanic!! You have every detail!! Need more ppl like you sir! Before I found your videos I saw one that said "Ok on timing listen very carefully***Bam!! Music montage *** Lol so yes sir I think I've hit like on all of your videos and subbed..Excellent Work!!
Will do
Thx. Curing time for the liquid gasket material? I install the cover flush but finger tight. Wait 1 hr then torque to specs. Used permatex optimum Grey.
👍😀
2010 Toyota Corolla repair manual said to release tensioner hook turn crankshaft to counterclockwise then clockwise. Now I have 2016 Toyota Corolla 2xr-fae should turn clockwise to release the hook in the beginning?this is another youtuber told me to turn clockwise to release hook.i dont feel to open engine cover and i dont have camera,and you need to buy new engine cover gasket too and extra.
😊👍
What are the torque spec for those 12 mm and 14 mm bolts for the timing chain cover? I feel like the most important part was skipped.
Thanks, 👍😀
Peter, I have a question.
Why wasn't the cover cleaned of all old silicone before installation?
I like your videos, great content, excellent footage... but what is up with the crazy amount of silicone?? It's too much and looks messy...
Great point, good cleaning is must 👍
hi, when you install silicone on timing chain cover does any ofthe hole is an oil hole, i assume all holes are for the bolt and not oil passage, becausee silicone can cover the oil hole
Noted 👍
also when you rotate the engine after aligning the timing mark on chain , will the timing mark on chain align again when i bring the no 1 cylinder to tdc. in case of timing belt mark on belt wont align after the 1st rotation. is same true fo timing chain
Yes
Thank you a lot
You are welcome
you are alllwais the best
Many Thanks my Friend. :-)
Mr Peter where is my map sensor on my 2005 Corolla S I looked every where on intake manifold
I have read your message, Thank you 😀👍
Hello dear friend. My Corolla 2017 dual VVTi 1.33 has vibration issue at idle when engine is warm. This started after change battery. It's just on 28000km and no LPG kit. And it has a strange "tick tick"sound. why this can happens?
Commenting on this video is FREE, but if you have technical questions for me, I charge a small fee for answering them, normally 5 USD $ per question. I am a true Technical Professional, Black Belt in engineering and The Car Doctor! Enjoy and ask. I'll answer professionally.
So, if you have question: You pay 5 USD $ via the THANKS button below the video to me. Add user your name to text line.
Make the payment and I will then give you a professional answer.
Thank you👍🏽😃
You’re welcome 😊
Thank you
Welcome!
Hi Peter. I have a question about the engine of my Toyota Corolla 2010. Could you help me?
hi Peter my D4D toyota hilux gearbox has got a problem when I put gear 3 it comes out how do I repair it
Hi, your gearbox is damaged. Replace it
the whole gearbox or Toth?
Step by step Mr peter
Ok and thanks. 👍😀
Tech tip, don’t put rtv sealant around o-rings.
Noted 👍
No chain tensioner?
Chain tensioner
You're using way too much rtv silicone.
Yes and Thanks Sir. :-)
Excellent work Peter!
:-D
@@PeterFinnTheCarDoctor thank you ! Timing chain km? Dall'italia!
hi....my friend ineed overhauling review
😀
2008
Маловато герметика, не заведется)
Thanks fo rcomment 👍😀
Sloppy work with the sealant
Try taking it out of engine compartment, your doing it the easy way, cant follow what your saying anyway.
Good comment, thanks 👍
2 dias y queda madreado ese motor....
חוסר ביטחון לא מקצועי
Français
toyot borbx
toyot