VESSEL SCRUBBER TROUBLESHOOTING

Our vessel is fitted with Scrubber and one
of its valve could not be opened. Here is the troubleshooting video I did for your reference#seafarer #seaman #leckyjake #electrical #electrician

[@Bill_N_ATX]

I am amazed at the broad spectrum of equipment that you are entrusted to fix. It’s clear that not only do you have a good deal of experience but a real good natural ability to troubleshoot and diagnose issues. It’s very enjoyable to watch you figure things out.

[@leckyjake]

thank you and feel flattered reading comments like this

[@christophertreeby5008]

Lecky is the most important crew member on a ship. Without one, the ship will be dead in the water.

[@briwire138]

I've had problems with those small relays in the past. I think it is important that any inductive loads have back emf diodes across them.

[@hancecrawford]

Leckyjake ships electrics must be serious issue the element seawater gets in everywhere you do good job it is a joy to watch engineer at work step by step fault finding keep safe till next time

[@leckyjake]

thank you for this wonderful comment

[@antonioreyes7476]

Another masterpiece from the world class ETO. Mabuhay🇵🇭💪👏

[@elproabhi]

Now that is what a perfect troubleshooting is...
May be the deck top guys should also see this that how much of techical skills it requires to troubleshoot and slove instead of only saying hurry up.

[@leckyjake]

thank you for this wonderful comment

[@sergiystrukov2522]

Jake, thanks a lot for your videos. It helped me within this hard year to remember my job

[@leckyjake]

welcome back

[@brongsbhor5642]

isa kang napakagaling na electrician onboard lecky.
God Bless you and your family..

[@johnpolos8796]

Sweet video and good find! I work on environmental chambers and constantly deal with those SSR’s .

[@leckyjake]

thank you for watching

[@-lijbarye1754]

I am an electrician cadet waiting to join ship soon. your videos are helping me a lot .thank you very much Sir.

[@prasert90667]

At my site a solid state relay type relay is used as the type with higher reliability.

[@axxtv9282]

Thanks for another learning of this electrical troubleshooting

[@leckyjake]

thank you for watching

[@geiuspalmero3919]

Wow thank you for sharing good information sir ❤️❤️❤️

[@vienduongxinchao]

Thank for your information. Safe sailing and bon voyage!

[@alfrazernudalo1824]

You're the best jake!

[@arnabmanna6537]

Sir your every video good and clear information sir

[@diogosantospassos1502]

You the Best

[@leckyjake]

thank you for watching

[@rb1m426]

Present lods.✋️ galing mo lods

[@leckyjake]

thank you idol

[@IonVladutu]

Good job

[@GO-ur4jl]

Well done Jake😀
Can you make one video how to make battery discharge test on HV 110v ups battery charging discharging board.. Thank you in advance!

[@leckyjake]

will try to put that on the list

[@mdfarukmia6921]

Hello bro I'm yours big fan's

[@TrapperAaron]

Man that bunker oil exhaust looks like pure cancer. Glad they implemented no running bunker oil in harbors and ports.

[@leckyjake]

thank you for watching. 👍

[@marjcabz95]

Idol sir grb galing mo

[@nagrerelax5602]

Nice.

[@geraldoramos3928]

Thank you so much God bless always

[@Skid6660]

2-3 years seems like an unusually short life for a solid state relay. I thought the video was going to end on you finding pinched conduit or something shorting the system.

[@leckyjake]

thank you for watching.

[@mheljezdejuan2044]

thank you lods additional knowledge 😉👍

[@zainalabidinabdrazak1484]

Thank you lecky

[@christopher20008]

Thank you for the learning

[@mithileshramteke3882]

Thank you so much sir

[@sagkatv1929]

Good day sir, request po next video shore power operation.

[@leckyjake]

will put that on the list

[@sagkatv1929]

Thank you sir.

[@aravind9516]

Rockstar🔥

[@ELECTROMARINEMANIA]

Lecky
❤

[@k22bngpny]

Thanks for sharing Leckyjake… you replaced a solid state relay, right?

[@leckyjake]

yes

[@lixtvofficial9008]

Good morning po sir nice sharing po

[@leckyjake]

thank you for watching

[@quycao1624]

hi bro, can you make video how to connect AMP with shore power on your good vesel. thanks

[@Paulrogbucksbeach]

Hey Jake
Have 2 metallic barges set up for commercial diver training. Separated by about 0.5m between each other with a walkway between them both.
Seperate generators on each barge.
Worried about the potential difference between the two.
Should both gen sets on the barges be bonded together?
And the barges bonded to each other too?
I thought they should be.
Thanks so much if you can answer

[@leckyjake]

we usually do the same in the vessel with the ship to ship bunkering and other ship to ship operation and we do not do anything at all.

[@mwiz100]

I'm not a marine electrician but I do work on live event production with generator systems and such.
Typically if there is any connection between the power systems we will ensure all grounds are bonded. That said in your situation odds are the water itself likely would handle any common grounding I'd wager. If concerned about potential between vessels them you could always meter from the walkway to a given hull/ground and see if there is any measurable potential between them and then act accordingly.

[@alen111ify]

greetings my friend where you can get books and script schemes related to ship current

[@warrfuen1217]

lecky pa help how to set up time in scrubber ...ty n advance

[@saieddastan4721]

Hi leaky good jobs
Pls participate about challenges expriments with us thanks

[@danielligan4109]

Hight ratio alarm idol how to troubleshoot

[@williamsaramosing8395]

Idol anu po course nu po? Tnx

[@Hnnn123]

On my company(CMA CGM) we have SCRUBBER Man.. And me,ETO, I have noting whit this sistem..
This sistem is shit for crew..
Calm sea 🤞

[@leckyjake]

safe sailing and thank you for watching

[@entertainmentguy4509]

I hate Scrubber onboard my ship -.-

[@danielligan4109]

High ratio alarm idol how to troubleshoot