Allen and Heath Popping Sounds and Noises SQ6 FIXED!
HTML-код
- Опубликовано: 7 фев 2025
- This is it! We finally have the issue with popping noises fixed. Watch this video all the way through so you can get the answer.
Get Cloud Storage (6TB - 6 Accounts - Unlimited Devices - Phone App Included - $10/mo) - puntfamily.got...
You can buy directly from Allen and Heath on Amazon
Amazon - amzn.to/3NjVkU6
Thank you to @AllenandHeathUK for taking care of us!
In my last video about “popping sounds” with our SQ 6, I was under the impression that a firmware update was the fix.
A few days after updating the firmware, the popping noise returned. I’ve been troubleshooting the system for what seems like days. Finally, I think I’ve figured it out.
We have 7 Sennheiser EW 100 microphones. One G2, five G3, and one G4. All of the Sennheiser microphones are in working order and have no issues. However, we keep getting a loud popping noise.
After numerous emails with Allen and Heath, who have been very helpful by the way, we’ve narrowed the problem down to what we think is RFI (Radio Frequency Interference). UPDATE!! Not the problem as of 09-23-2022
Please like and subscribe if you found this video useful.
Click on the 🔔 if you’d like to be notified when I upload new content.
Equipment used in this video:
Sennheiser Microphone - amzn.to/41cWC9f
A&H SQ6 Soundboard - amzn.to/3NjVkU6
Sony ZV 1 - amzn.to/3GBxi37
Sony ZV 1F (Good Beginner Option) - amzn.to/3uJzR0n
Iphone Tripod -amzn.to/46SVcSH
DJI Osmo Mobile 3 - amzn.to/3uSeCcT
Most Recent DJI Osmo Mobile 6 - amzn.to/47VAzGQ
Other equipment we use:
AVKANS HDMI PTZ Camera, 30X - amzn.to/4aenfyx
--
Elgato Cam Link 4K Capture Cards - amzn.to/3ThNq1x
--
Blackmagic SDI to HDMI Converter - amzn.to/3t3cFKi
--
Asus TUF A15 Gaming Laptop - amzn.to/47RGVqw
--
Magnus VT-4000 Fluid Head Tripod - amzn.to/41jp2yy
--
15 Key Elgato Stream Deck - amzn.to/3uO7w9j
--
LEFTEK PTZ Controller - amzn.to/4aazxbo
--
Comica Shotgun Microphone, CVM-VM20 - amzn.to/3Re1AxP
--
Memory Card - amzn.to/41irDc4
--
Tripod - amzn.to/489kDjJ
--
🔔Disclaimer: I am an Amazon Affiliate. The links provided above will direct you to Amazon. At no extra cost to you, I can earn a small commission from purchases that you may make.🔔
i need a video how to routing personal monitor mixer and stage box . if possible
Great Idea! I'll see what we can do!
@@RevisionMedia ok thank you
Hi!i had also same issue about the popping noise nothing connected audio inputs but st3 lights signals comes out. and when i put xlr out put to my powered speaker the popping noise will start poooooooooooooooooot it's a headache for me
Hey, thanks for the comment! If you bought it through a distributor, I would let them know about the issue. Ask then if it's still under the manufacturer's warranty. If not, maybe try and reach out to A&H customer service.
Hi @Revision Media. I have a different scenario and this has been a headache to me. "Nothing connected to XLR inputs 1 until 25" I am getting a popping sound when I turn the preamp gain. =(
Big fan idol from Philippines
Thank you!
what do you mean Big fan?
Big fan sir very good
Thank you very much!! I appreciate you
I have similar problems and have tried to record inputs and outputs to see if it would register. Do you think the desk's monitoring (SQ DRIVE) would capture this or is it sending out a spike that is after this processing phase?
Hiya!! Bravo.amazing done-alll the best.guy. =))
Hey at this point what would you say about the reliability of the sq6? How about using it outside in the heat?
I think it’s great! I haven’t personally tried to use it outdoors in the heat but I know there is a local company here that does. They don’t have any issues with it. They actually own a few of them as loaners for their customers and highly recommend them. They are rated really well on Amazon too. amzn.to/4bxV2TO
@@RevisionMedia thanks
Hi Revision Media. Thank you for your videos. I have the same problem with poping, expecialy in 1-2 hour when mixete is turned, after that time it stops. Please is problem in RFI or in that IDC cable between cpu and board? Thank you.
It very well could be. I would suggest getting in touch with Allena & Heath to start a service ticket.
Service for allen heath is far away for me, from my country Bosnia and Herzegovina. From your videos I didnt get was yours problem in RFI or IDC cable you mentioned. Or those two are conected one to other?
@@kongoranin my apologies. It was a faulty IDC cable.
Hi,
Good content :)
We have the same issue at the moment with SQ mixer. Approximately how fast did that popping sound appear after mixer was powered on and connected to the powered speaker?
Man! So sorry for the late reply. It would usually happen right away or at least within the first hour.
same problem the sound pop and humming is so loud and disturbing...
Definitely check with customer service