Making A Big Cedar Bar Sign Using Our Newest Router Bit
HTML-код
- Опубликовано: 7 ноя 2023
- Episode #817 Today, we're introducing the newest router bit to our arsenal! This this is AMAZING! We're using it on a large Cedar bar sign. If I was using our normal 90 degree bit, this would've taken twice the amount of time.
3/8" 90 Degree Bit - makeawoodsign.com/products/90...
6" Clarendon Set - makeawoodsign.com/products/6-...
9" Beer Mug - makeawoodsign.com/products/9-...
Router Bit Depth Gauge - makeawoodsign.com/products/ro...
Base Plates - makeawoodsign.com/collections...
Router Bits - makeawoodsign.com/collections...
Surface Bit - makeawoodsign.com/products/su...
Dewalt Router - amzn.to/3V6hM5C
Milwaukee Router - amzn.to/3RIb02O
Ferry Lights - amzn.to/3YJd92y
DeWalt Disc Sander - amzn.to/3e4aUVL
DeWalt Random Orbital Sander - amzn.to/3Cyo7PM
Spray Primer - amzn.to/3RGcXwT
Spray Clear Coat - amzn.to/3EgYS61
DeWalt Angle Grinder - amzn.to/3WZO4Qu
Kutzall Extreme Course Disc - amzn.to/3hOB9AT
Kutzall Medium Disc - amzn.to/3EDkl8m
Super Gloss Epoxy Resin - amzn.to/3AgPNXW
Dewalt Die Grinder - amzn.to/3SlnFuK
Kutzall Extreme Flame Burr - amzn.to/3kgdnPU
Foredom Rotory Tool - amzn.to/3XQYKQJ
Green Tape For Transfer - amzn.to/3ZqM7wP
Freezer Paper - amzn.to/3IE1R97
Mullet Tools Dust Collection - mullettools.com?aff=27
Use Code MAKEAWOODSIGN for 5% off
Email List - makeawoodsign.com/pages/subsc...
Starbond - bit.ly/3hcIhnq
Use Code Makeawoodsign at checkout to save up to 15% off on your purchase
Our website for Sign Carving Supplies: www.makeawoodsign.com/shop/
We also have 2 online courses. We have a FREE Video Course. 7 Steps To Sign Carving Basics. Here’s the link www.makeawoodsign.com/shop/in...
Plus, Ryan & I completed a paid course titled ericrhoten.podia.com/how-to-f...
Check these out and let me know if I can answer any questions for you.
If you don't know where to start, Here's our Small Beginners Sign Carving Kit
www.makeawoodsign.com/shop/in...
My favorite router bit, www.makeawoodsign.com/shop/in...
My Dewalt DWP611 base plate www.makeawoodsign.com/shop/in...
Comments or Questions, my Email: eric@makeawoodsign.com
Vicki's Email: vickiwithdavesigns@gmail.com
Free router bit sharpening service now available. Learn all about it & all the Premium Membership Benefits.
www.makeawoodsign.com/shop/in...
Here's a link to our Amazon Affiliate Store www.amazon.com/shop/makeawood...
“Get the Freshest CA glues on the market from Starbond. Here’s the link
bit.ly/3hcIhnq
Use Code Makeawoodsign at checkout to save up to 15% off on your purchase”
Instagram: MAKEAWOODSIGN
Facebook Page: makeawoodsig...
Links to the SCOTD albums on our F/B page:
SCOTD 4
pg/makeawood... 
Хобби
Awesome sign
Thanks Patrick!
Wow Carving 👍
Thank you
That new bit is an answer to prayer! Just spent well over an hour cleaning out some background, which is typical. Looking forward to cutting back on that. Just ordered!!
Right on, man! We appreciate the order. You're gonna LOVE this thing!
Great looking sign !! Naturally, the thought was planted .... now on my way to the frilg.....
😂😂Thanks Gary! Grab one for me too!
Great job Ryan, that is one good looking sign!!
Thanks Mario!
Beautiful work brother 🏆
Thanks buddy!
Beautiful job Ryan!
Thanks Chris!
Beautiful
Thanks buddy!
Dang.....that is a game changer bit! It sure would have saved you a lot of time on some of the big signs you've made in the past. Eric better hide that bit when you move to Arkansas or Ryan will go wild and have all the tree trunks on the property carved with designs. LOVE how the sign turned out. It's AWESOME!!!
😂😂😂 it would make short work of them!
Gotta admit, that sign makes me thirsty!
😂😂 me too!
Top job ryan and love the subject matter lol
Thank you buddy ❤
well done Ryan
Thanks Burt!
What a beautiful sign. Love the way that clear coat adds the finishing touch. I haven't tried painting parts of my signs, yet. Did you use gloss or semi-gloss paints?
We almost always use One Shot automotive paint. It covers really well and it's exterior
Awesome videos I noticed you said you prefer a flex trim router instead of a plunge router. Can one use a regular router and just buy a separate base? I tried using a plunge router years ago and damn it was so difficult….your videos re inspired me to try again.
Usually the large routers come with the plunge and fixes base so you can use either. We like the trim routers just because they have plenty of power to do whatever we need them to and they're smaller so easier to maneuver.
That looks like a hoss of a bit!
Beautiful sign, Ryan....well done!
Thanks Frank!
Howdy Guys....
Nice video. I finally got around to getting myself a Carving Liner and a Profile bit. Ive been using just a 60° and just tilting the router for sharp edges and Dremel for higher detail.
I was surprised when i heard you say "10 to 12 coats".
Im curious, was that specifically just because you was going to do painting on top of it?
When the painting was done, did you add additional coats of Clear ontop of the painting?
Looking forward to the next videos. 😀
The more coats, the better the finish looks in my opinion. But it was mainly for the painting. There's no need for another coat after the paint
Great sign and that bit is awesome!
Thanks Bill!
Great job! I like the new bit.
Thanks Pam!
I have a question for you guys. Why don’t you or should I use a bowl bit to clean up the scalloping in and around the art not the edges but everything else to make a smoother look. Btw just started following you guys, love the tutorials and the banter between you and your dad.
😂😂Thanks man! We have a lot of fun working together.
You definitely could use a different bit for a smoother look, and maybe we'll do that in the future. We just like the rough texture look.
Ryan...that is a work of art. Greta job. have to add that new bit to my collection.
Thanks Emil! It's an awesome bit
Beautiful,beautiful workmanship
Thanks Thomas!
Nice job and what a hunk of cedar!
I LOVE this stuff!! Wait till you see what we did with the rest of it! That video will come out late November
@ericrhoten looking to buy a router, would u recommend the Flex trim router or that new milwaukee 1/2 plunge router kit. Mostly want to carve out signd and stuff like yourself?
I don't care for using a plunge router for carving signs. It's too bulky and really not necessary.
I love the FLEX trim router. It's super powerful, comfortable, the batteries last a long time and if you get it before the end of this year it's 100% lifetime warranty
@@oldave100thank you for your reply, I just picked up the flex and ordering your base plate and blades
Awesome sign !!
Thanks John!
Nice job Ryan im going to check out that new bit I just finished a large sign this would have been alot of help
Right on man. It's a HUGE benefit
Love it!
Thanks man!
Great job Ryan, curious to know how big your board is?
Thanks Robert! I believe it's about 16"X30"
Nice 👍
Great video. I haven't heard, how's the move going?
Slow going, but making progress
Woo Pig Sooiee!
Is a slower speed, better for carving letters,
No, we keep our routers full speed when carving. The only time we ever turn them down is if we're surfacing a board on the router sled
I'm sold on this bit already.
Dude, it's awesome!
Nice work
Thanks Ron!
Where can I get the plate you’re using
Here's a link to our base plates 👍👍
makeawoodsign.com/collections/acrylic-base-plates
Is the new bit a 1/4” shank?
Yeah, just like the others (except the surfacing bit) it's 1/4"
This is gorgeous! Where did y’all get this beautiful thin piece of cedar??
Thanks buddy! That's from a bunch of cedar our friends brought us. I can't remember where they got it.
Have you guys tried airbrushing instead of painting?
I've tried it. man it's tough! I really want to get good at it but dang!
Nice job
Thanks buddy!
Nice job...🤘🤘🤘🤘
Thanks Dan!
👍👍👍.Thanks Ryan
Anytime, buddy!
I love using cedar
Same here, buddy!
Nice work. You said you linked everything in the description but I didn’t see a link to the paint you were using to paint the beer mug. Also, do you have to seal the sign again after you paint it.?
Oh man, sorry about that. I don't have the link right now but just go on Amazon and look up One Shot paint and there's a ton of different colors on there.
And no need for more sealer after the paint.
Nice 👍
nice work and great video. hey do you offer a set of bits that you recommend thanks
We sure do. You can check out all of our bits right here. makeawoodsign.com/collections/router-bits
If you're just starting out, I recommend the profile, 60, and 90 degree. You can do %75 of all your carving with those three bits.
Thank you
Good 👍
❤
👍👍👍
Instead of painting ,and getting drips ,try posca paint pens
We'll give those a shot!
You guys ever misspell something on a sign? Seems like something I would do before realizing it halfway through.😅
😂😂😂 Oh yeah. More than once! But, never on a really big sign. There's ways to fix that, but man it sucks
I have, and I didn't catch it till I delivered it,but she took anyway, she said it would be a reminder that we're not perfect.
Heck yea ! Like the old addige measure twice cut once , spell twice carve once , also getting caught up in your work and missing a letter, then trying to fit it in . 😮
Love your videos! I'll have to look up that Bible verse on your hand.
Thanks John! It's a good one 👍👍
Nice 👍❤
Well I'm not going to be making any signs for any drunken beer sots, 😉 But the sign came out really good!
😂😂😂 Just out of curiosity, what's a "Sot" ?
@@oldave100 It's an old word meaning "a habitual drunk."
I work with the homeless and we have plenty of them around! 🤣🤣
@@zitternden 😂😂 ok that makes sense
👍👍👍👍🍺😎
👍👍👍
Beautiful
Thanks Mike!