Sir, please discuss other failures in flexible pavements and their causes and remedies. Please do another video related to the failures in cement concrete pavements and their causes and remedial measures.
Sir, Please make video on Polish Stone Value and Resins based Skid Resistance along with Use of High Friction Resistance Treatment in india Thanks Er.Dipak J Patil RSA 🙏
Sir for Mr value test of bituminous mix .formula 11.08*ITS-3015.8 given in IRC-37-2018 for 150mm dia mould for DBM. Is this formula may be use DBM -ll and BC -l&ll. And formula 1.1991*ITS+1170 for PMB grade bitumen may be use for CRMB grade also. Sir I'm confuse for this. Pls sir make a video for this.
It is difficult to relate Mr value with ITS and these are the two different test procedures. In fact there are several factors that will affect the Mr. value of a mix. Therefore, it is always suggested to determine it in the laboratory.
This is very helpfull video for everyone. Thankyou sir.
So nice of you. Keep watching
Overlay on composite pavements
c ollecting the information. Will male soon.
Sir, please discuss other failures in flexible pavements and their causes and remedies. Please do another video related to the failures in cement concrete pavements and their causes and remedial measures.
You will get these videos also very soon. Thanks. Please circulate the link in your group to increase the viewership.
good explanation
Keep watching and share the link with your friends.
Thank you sir
Welcome, keep watching
Sir,
Please make video on Polish Stone Value and Resins based Skid Resistance along with Use of High Friction Resistance Treatment in india
Thanks
Er.Dipak J Patil
RSA
🙏
Noted
Sir for Mr value test of bituminous mix .formula 11.08*ITS-3015.8 given in IRC-37-2018 for 150mm dia mould for DBM. Is this formula may be use DBM -ll and BC -l&ll.
And formula 1.1991*ITS+1170 for PMB grade bitumen may be use for CRMB grade also. Sir I'm confuse for this. Pls sir make a video for this.
It is difficult to relate Mr value with ITS and these are the two different test procedures. In fact there are several factors that will affect the Mr. value of a mix. Therefore, it is always suggested to determine it in the laboratory.
Sir Etna acha topic hi but samj nhi aaya plz explain Hindi this lecture sir
Ok, will dub it in Hindi also.
Sir could please explain how to calculate the PCI from the data collected from field.
That could be explained in a separate video, will work on this subject also.
Okay Sir
Thank you