I work with a cheap Chinese laser, if the hole is in the place where it was designed or the grooves on the Chinese slightly curved pipe match up to one tenth, then this is already a miracle. This is all that you show in the video - just magic.
shows the material when it comes out of the machine after cutting not deburred !! and not sand-streaked then no part fits together. Kind regards, machine operator of a TTM FL300
Hi It's M Almost all parts shown in the video fit together directly after cutting, without any deburring or sandblasting. Why not come to our Customer Centers and see for yourself! Just write us: CustomerCenter@trumpf.com Best regards Your TRUMPF Team
@@TRUMPFtube Hello dear trump team I have to contradict the statement that the parts without deburring! because we ourselves have 4 TTM / Bystronic 2d / 3d laser systems with Trump lasers and 80% of the parts do not fit together without deburring / sandblasting! with deburring / sandblasting they almost always fit but without doing anything it doesn't fit because there is always slag on the parts no matter whether steel / stainless steel or aluminum and no matter what size whether 1mm or 22mm material thickness.
Hi IT's M If you could send us a few examples or let us cut samples of your parts, we could tell you whether your parts need deburring or not. Also we're still offering to visit us and we're happy to check what we can do. Wish you a nice weekend Your TRUMPF Team
@@TheEnixx Hey, if you have any trash, it means you have a wrong laser alignment and the brand of laser is irrelevant. I have 3 Chinese lasers at work (I wish I had Trumpf) but I set them up so that I have no trouble. The slag is oxidized after cutting, but holds poorly and falls off by itself as the parts fit together. Greetings
@@tsiou2007 thank you for your inquiry. We cannot hand out the design, but can provide you with a sales document. Please send us a request via the website if you are interested. www.trumpf.com/en_INT/company/trumpf-group/locations/ Best regards from the TRUMPF team
I work with a cheap Chinese laser, if the hole is in the place where it was designed or the grooves on the Chinese slightly curved pipe match up to one tenth, then this is already a miracle. This is all that you show in the video - just magic.
Incredibili possibilità, queste macchine aprono un nuovo mondo per la lavorazione dei tubi e non solo, BRAVI
Brilliant !
Spectacular.
ممتاز نتمان لمن دائما التألق والريادة فالميدان
shows the material when it comes out of the machine after cutting not deburred !! and not sand-streaked then no part fits together. Kind regards, machine operator of a TTM FL300
Hi It's M
Almost all parts shown in the video fit together directly after cutting, without any deburring or sandblasting.
Why not come to our Customer Centers and see for yourself!
Just write us: CustomerCenter@trumpf.com
Best regards
Your TRUMPF Team
@@TRUMPFtube Hello dear trump team I have to contradict the statement that the parts without deburring! because we ourselves have 4 TTM / Bystronic 2d / 3d laser systems with Trump lasers and 80% of the parts do not fit together without deburring / sandblasting! with deburring / sandblasting they almost always fit but without doing anything it doesn't fit because there is always slag on the parts no matter whether steel / stainless steel or aluminum and no matter what size whether 1mm or 22mm material thickness.
Hi IT's M
If you could send us a few examples or let us cut samples of your parts, we could tell you whether your parts need deburring or not.
Also we're still offering to visit us and we're happy to check what we can do.
Wish you a nice weekend
Your TRUMPF Team
@@TheEnixx Hey, if you have any trash, it means you have a wrong laser alignment and the brand of laser is irrelevant. I have 3 Chinese lasers at work (I wish I had Trumpf) but I set them up so that I have no trouble. The slag is oxidized after cutting, but holds poorly and falls off by itself as the parts fit together. Greetings
yaptığı parçaların teknik resimini çizimini nerden bula bilirim.
Hi, what is the ''joint type'' called at 0:30 (integrated hinge in the square tubing) I'm trying to find more info about this.
Hello @FASTPITBIKEoCOM, we call the joint type „Puzzle nose“ or also „Puzzle Connection“.
All the best from the TRUMPF Group
hello and congratulations@@TRUMPFtube Can we have the design of this connections. I want to try and implement it. Thanks in advance.
@@tsiou2007 thank you for your inquiry. We cannot hand out the design, but can provide you with a sales document. Please send us a request via the website if you are interested. www.trumpf.com/en_INT/company/trumpf-group/locations/
Best regards from the TRUMPF team
I will never get a chance to buy trumpf Lazer machine because very very expensive and when you buy it never have it entirely.
02:17 Annaschluss