How to install Womet-Tech Bar Ends on a 2013+ Honda CBR600RR by TST Industries
HTML-код
- Опубликовано: 15 сен 2024
- Protect your controls while adding style to your CBR600RR with these easy to install Bar Ends. For more info see: tstindustries....
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
These Womet-Tech bar ends will protect your motorcycle in case of a crash or a fall, and add style to your ride. They were designed with a little extra length to protect the fairings and controls in most crashes. The combination of delrin and aluminum gives them a unique functional design. The high density polymer will absorb some of the impact during a crash, and help to slide instead of catching.
Music:
Son Of A Rocket - Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
So my screws on my oem bar ends just spin and never release....any ideas on what I need to do?
Hi bart, i already have these bar end sliders on my 2015cbr600rr. Question is can i install crg bar end mirrors with this womet tech bar end sliders?
Hi. From what I know about CRG mirrors, they mount straight to the 7/8" diameter bar. For that installation you would need to move all your controls inboard and make sure you have enough raw bar sticking out to make the installation work, and make sure that your throttle tube free rotation is not affected. In this installation the bar ends and mirrors would jive together. A quick note, to move the controls inboard, if you are using stock bars, you will need to shave the key protrusion on your switch bodies so they can locate more inboard, or up the bar towards center of bike. This modification is typically performed when going to aftermarket clipons but rarely do I see street guys doing it. If you are ok with the mods then you should be good to go with this mode. Otherwise, I know that CTG sells an optional internal mounting kit for the mirrors. They have an expanding element that jams itself inside the bar as the mirrors get tightened on. You may be able to stack the mirror anchor and the Womet-Tech delrin slider of the barend setup but we have not done that install so I can't tell you for sure it will work well. We are working with our buddies at Womet-Tech to design new bar end mirrors that will have interoperability with the bar ends. That won't be in production until later this year but I felt it was worth mentioning.
thanks for the input! will try my luck
Disregard, user error....I got them off
Gotcha...glad it worked out.
How??
@@jrdavid12 hold the end of the bar, as you unscrew
@@richiem5025 shh it give me a fight but it came out