How To Replace Crankshaft Position Sensor 97-99 Ford F150
HTML-код
- Опубликовано: 5 авг 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/107/j/crankshaft-pos...
1A Auto shows you how to repair, install, fix, change or replace a broken, noisy, squeaky, worn or groaning crankshaft position sensor. This video is applicable to the 97, 98, 99 Ford F-150
🔧 List of tools used:
• 8mm Wrench 1aau.to/ocv/1AXAA00011
• 10mm Socket 1aau.to/oSC/1AXAA00017
• 8mm Socket 1aau.to/oSC/1AXAA00017
• Needle nose pliers 1aau.to/okE/1AXAA00051
• Needle nose pliers 1aau.to/okE/1AXAA00052
• Ratchet 1aau.to/oaey/1AXAA00016
• Socket Extensions 1aau.to/oZa/1AXAA00015
• Swivel
For More Info visit us at 1aau.to/h/a7c/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
This guy knows wat he's doing and explains very well and clear (No other video explained about the back nut on compressor holding refrigerant line pressure)...
Thanks for the great video. Figured out my problem with some other videos but could not have changed the crank sensor without this video! Worked like a charm and now the truck starts right up. Hardest part is the AC compressor and that wasn't too bad. Did need another person to hold it out of the way in order to get the sensor re-installed. A little over $30 for the part, tax included. Thanks again.
+John Pruitt Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Thanks for the video it really helped. I have a 2004 and it was 3 bolts that were 13mm, and I needed a deep socket.
Thanks. A faulty Crankshaft Positioning Sensor is one of the most common No-Start conditions. I have a 97 4.6L
I did too lover that engine and truck life happens and I lost but I hope I can get another r 150 one day
I have a 97 f350 5.8L efi would it similar? I can seem to locate it. I was told it could be in the distributior cap.
I have a 2006 F-150 5.4 2wd. Changed out the Camshaft positioning sensors and still runs rough. Would the next thing be to change out the Crankshaft sensor? I had advance put the scanner on it when it started running rough and fault said camshaft or crankshaft sensor. So went with the easiest one first.
Thank you for the video!
+Thee Nihilist Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/crankshaft-position-sensor/i/1aecs00006?RUclips&CTA+Comment&TZw1CDyw_KQ
Hey crew any chance you have a video for the same part but on a 2009 Ford f150? I can't find a video anywhere on the internet.
I have a 1996 7.5 l 460 motor with a California cam sensor. Put a new timing cover on and it doesn't have the bosses to connect the cam sensor is there any way I can use a different sensor on the single boss mount on the timing cover?
Good video but you really should tell people what motor it is. The 97 had a 4.2 and a 4.6
1998 E250 5.4L van engine Has been running fine. Twice in the last 3 weeks, when I went to start it, the engine fired up on the first crank, but within a second it kicked back and did not continue to run. I tried to crank it over 3 more times but the engine didn't move like it was hydraulically locked up. Waited 20 minutes and it started and ran fine. Would this sensor do that or something else?
Looks like you removed the radiator and fan cover to get to it?
2-wheel drive is much more difficult to do. Very little space to get a wrench in to work on it.
When turning the key to start shouldn't the rpms move if not would that be a bad crank sensor
Thanks for the info. Initially I thought it could be done by just removing the belt.
+David Barthel Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Is this the same location for a 2011 ford f150 3.7 V6 crankshaft position sensor?
+Sevens Balboa We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Hi for the 2009 ford f150 stx is the same location for the sensor
Took me 45 min to replace. I didn't have a swivel so i used an open end wrench on the 3rd bolt. Wasn't bad at all. Didn't get sockets stuck😂😂
Great video, thanks!
You're welcome! Thank you for the feedback. +youtoobe169
@@1AAuto So, I just finished this job, but for the life of me could not get the connector to "snap" onto the new part. I actually thought I had a slightly wrong part and got a different one from a local auto parts store and visually compared them, and same thing. I tried squeezing the clip and everything. I ended up just using the flat part of a ratchet and firmly pushed it into place. Not sure if it snapped in or not, but the car runs fine now. The old part had a black film over the metal part of the sensor.
+youtoobe169 Thanks for the update! We are glad to hear you got the new part installed. As long as you secured it down with the bolt, there shouldn't be any issues with the replacement part.
Would this also apply to 97 Ford Expedition 5.4L?
+Jessica Boedicker It should be the same or a similar procedure. Here is a link to the crankshaft position sensors that we carry for your vehicle. Hope this helps you out. goo.gl/bXJVDU
What are the symptoms of a bad crankshaft position sensor?
Engine is in limp mode diagnostic comes back no fault but ford transit 2.2 13plate still in limp mode
What coolant leak out or would that be an odd leak I only ask because I have a leak but it doesn’t seem to be coming from my water pump
@@OscarGarcia-tf6jg maybe it's the intake manifold leaking coolant into the spark plugs
Is that the same process on a 4.2 six cylinder with AC ?
+swamp man It may be a different procedure on that application. Thanks for watching. 1aauto.com
Do the 1994 f150 5.0 have a crank shaft sensor?
Does any body know what to do if it feels like the sensor is hitting something
what if i bought one with the sensor missing,i bought a e150 van with 4.2 litre because they couldnt fix it and sold it to me but its removed already,i have to start from scratch.
+g c Thank you!
Is this for the 4.6 or 4.2
It should be noted this is not a 4.2l
How do you know something was wrong with the Crank shaft sensor Did the check engine light come on because I have a 2007 expedition 5.4 L and it hesitates on celebration when we’re driving
+CopWatch Corpus Christi TX Police Accountability This video was done for instructional purposes. If the part is faulty the check engine light would be illuminated, however, we wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
I have a 1997 ford f150 5.4 v8 can u help me my won't start
Where is the crankshaft position sensor on a 2012 F350 6.2l gas?
How to take off clip?
ford lariat f150 5.4l crank no start/ t-shoot the ff: spark okay,pulse okay,relays and fuses okay but no fuel pressure. tried starting fluid ran for a bit and died. my conclusion i have to change my fuel pump buti also need to ask your expertise to be 100 percent sure.thank you your response very much appreciated
+izcoronel We could never be 100 percent sure without actually seeing the vehicle! If you are unsure we would always recommend having a trusted mechanic try to diagnose your issue. www.1aauto.com
It’s your pump mines did the same
I have a 97 f-150 mine cranks no start has fuel and spark but it won’t start and no codes pop up
+Nicholas Medina We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
You only showed removal of two bolts and a sensor not the 3rd up high bolt...did your ratchet reach that easily
* HAWK he just rotated it away just enough to get to the sensor.
Crank sensa position for Ford f150 2015
My car stalls but it’s not showing no codes and it runs good when its in park but when i drive around the corner it stalls out
Did you ever figure yours out? Mine is doing the exact same thing. Thanks
Where is the camshaft position sensor located on the same vehicle?
on the front side of either head, 2 cam sensors
Why is my ac compresor on the driver side
Where is the crank positioning sensor on a F250 2012 6.7 L engine
+Gary Eberth We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
Anyone have a issue with a code p0315 with their f150 ? That’s why I’m watching this video
Yea super easy when your ford is lifted and on a lift! Lol
+sketchistate Thanks for checking us out! 1AAuto.com
Why would it go bad? It is just a magnet.
+David Barthel Symptoms of a Bad or Failing Crankshaft Position Sensor
Issues Starting the Vehicle.
Intermittent Stalling.
Check Engine Light Comes On.
Uneven Acceleration.
Engine Misfires or Vibrates.
Rough Idle and/or Vibrating Engine.
Reduced Gas Mileage.
easily done when it's on a lift
How to fix a stuck crankshaft sensor positoon
What a dumb place to put it .it was a pain to put it in.
Is there a crank sensor on a 91 ford 460, or is it the pickup coil on that model?
+Chad Axling Yes, there will be a crankshaft position sensor on your application.