I found one but it was always 12volts so I switched it to another one that got 12volts with the key on but then it stopped getting 12v. So I used another one and it did the same thing. I disconnected the bypass wire and know they are getting 12volts again idk what’s going on???
Hi, what gauge jumper cable do you recommend? Also, how long does the wire have to be? I would like to do this repair but am not sure what gauge of wire to use. Thank you.
Hi Hans, I did this to my Volvo and the fuel gauge does work now but only when I turn on my headlights. What gauge wire do you recommend and does the thickness of the wire matter for this job? Copper wire or can it be a basic wire? Thanks.
@@hanssgarage1886 Strange its in the middle? I've had a broken temp sensor in my 940 and with that, the needle remains in the "cold" position (to the left). So it's probably an other contact problem in the gauge cluster I think.
Hans, My fuel gauge is on empty. The fuel sending unit and pump are now both out of the fuel tank. The fuel tank is inside my garage. My question is what is actually sending the 'signal to the fuel gauge' when you fill up the tank ? What happens ? Does the sending unit compress or expand inside the tank when you add fuel to the tank ? I want to try and test the sending unit by having my son compress the sending unit. Will compression make the fuel gauge read on E or F ? Letting it go and not touching it, should the gauge read E or F ? - Thanks, Pg
I have 960 which has problem with fuel gauge too. It shows bit less than quarter of a tank. I've read on 960 it works other way around, 0 to full and 280 to empty, I jumped pins (in the trunk) with wire and gauge jumpd to full. Connectors disconnected gauge was showing empty and low fuel light was on. Sooooo, have u have any idea how to fix level sending unit?
Yes, my gauge was completly dead. With multimeter you can measure the resistance. If it stays at same when you add some fuel you know there is something wrong with the fuel level sensor. Does the warning light work?
update: i dismantled the underside of the steering column (the plastic cover there), unbolted my seat and pried using a prying bar to find out one of the previous owners welded the metal ring to the retention clips inside... im waiting for my angle grinder to arrive -.-
@@hanssgarage1886 the temp guage issues is actually pretty simple to fix, the most annoying part is finding the voltages and resistance that the coolant temp sensor sends, if you want i can look at my working gauge and try to find out the readings
I have a 93’ 940 and I’ve had to rely on Km per refuel to manage my gas for the past 10 years. Thanks so much!
I'd really like some clear and complete wiring and circuit diagrams for the 740 and 940. Anyone can have them for the 240.
I did this fix about two weeks ago and it works great! No issues at all with the fuel gauge.
Thank you so much! Picked up a 940 last week (my first Volvo) and did this today and fuel gauge is now working again!
Your welcome! Happy to help. I learned this from a swedish RUclipsr.😁👍
Thanx alot. Just fixed mine as we speak after seeing this video😁👍
Perfecto! Thank you Hans! Next beer is on me!
Hello m8t as your tep gauge trying and disconnected from the engine like your video
Thanks for the video!
Great video going to see if this will help me with my 760 that I just bought!!!
Thanks. It might help.🤗👍 Congrats for the new car!👌
Idk what the screw is for but I’m not getting 12v on the one you use for the bypass. Maybe I got to find another screw?
I found one but it was always 12volts so I switched it to another one that got 12volts with the key on but then it stopped getting 12v. So I used another one and it did the same thing. I disconnected the bypass wire and know they are getting 12volts again idk what’s going on???
Finally just got round to doing this! Work a charm thanks for sharing 😊
Great job
Hi, what gauge jumper cable do you recommend? Also, how long does the wire have to be? I would like to do this repair but am not sure what gauge of wire to use. Thank you.
For the temp guage , start with the temperature sensor first.
Temp gauge is allready fixed. Sensor was fine. I started from that. :)
Hi Hans, I did this to my Volvo and the fuel gauge does work now but only when I turn on my headlights. What gauge wire do you recommend and does the thickness of the wire matter for this job? Copper wire or can it be a basic wire? Thanks.
Great video, having the same problem. Did you get the temperature gauge to work?
Thanks, not yet. I will focus on that later.😊
@@hanssgarage1886 Strange its in the middle? I've had a broken temp sensor in my 940 and with that, the needle remains in the "cold" position (to the left). So it's probably an other contact problem in the gauge cluster I think.
Hans,
My fuel gauge is on empty. The fuel sending unit and pump are now both out of the fuel tank. The fuel tank is inside my garage. My question is what is actually sending the 'signal to the fuel gauge' when you fill up the tank ? What happens ? Does the sending unit compress or expand inside the tank when you add fuel to the tank ? I want to try and test the sending unit by having my son compress the sending unit. Will compression make the fuel gauge read on E or F ? Letting it go and not touching it, should the gauge read E or F ? - Thanks, Pg
I have 960 which has problem with fuel gauge too. It shows bit less than quarter of a tank. I've read on 960 it works other way around, 0 to full and 280 to empty, I jumped pins (in the trunk) with wire and gauge jumpd to full. Connectors disconnected gauge was showing empty and low fuel light was on.
Sooooo, have u have any idea how to fix level sending unit?
Did you fix the problem i have the same problem?
was the gauge completly dead, when i turn mine on it goes just over half way then dosnt move all running time
Yes, my gauge was completly dead. With multimeter you can measure the resistance. If it stays at same when you add some fuel you know there is something wrong with the fuel level sensor. Does the warning light work?
Okay thankyou, no warning light for me, when i turn car on the gauge goes up to just past half full and stays there
@@lyndenleatherland5384 then i would bet on level sensor. The multimeter and resistance will give you the answer.😊
Awesome thankyou will try over the weekend
sadly my panel wont come out at all i pried like an idiot and its still stuck
These panels are a bit of problem... I'm having now problems with temp gauge.
update: i dismantled the underside of the steering column (the plastic cover there), unbolted my seat and pried using a prying bar to find out one of the previous owners welded the metal ring to the retention clips inside... im waiting for my angle grinder to arrive -.-
@@hanssgarage1886 the temp guage issues is actually pretty simple to fix, the most annoying part is finding the voltages and resistance that the coolant temp sensor sends, if you want i can look at my working gauge and try to find out the readings
@@Asterix1022 No need, thanks. The problem is the gauge itself. I'm trying to fix it with soldering iron...
Great job
Thanks!😊