Hey Billy, Great setup video brother. Since I have 2 Inspires and have had some experience with the Gimbal Plate, If I may add a bit of advice to your camera check, When mounting the camera and checking to be certain that it is secure, I recommend that you hold the Gimbal mount Plate steady, It's mounted to the bracket with those rubber dampening buttons. Large movements of the Gimbal Plate to the full allowable travel of the dampening rubber mounts can possibly cause the ribbon cable between the camera gimbal mount and the circuit board to come "unplugged" from the camera gimbal connector. This will cause your camera to not function and you'll spend hours trouble shooting as to why the camera no longer works and won't find the reason unless you remover the entire gimbal mount plate assy from the bottom of the aircraft and make sure the ribbon cable is secure. So it's a good idea to hold the mount plate steady when putting pressure on the gimbal and not let it move around much. During normal flight that plate moves very little and pretty much never travels to it's full range of motion. I had this happen on one of my Inspires and I went nuts trying to trouble shoot why the camera stopped working. The rest of your steps are spot on and almost step by step match what I do each time I fly the Inspire. Awesome Video... ! ! !
If ur ever up for it, I highly recommend investing in a crystal sky. I love mine (the midrange model). It makes everything so much better, plus it holds extra as cards for easy exporting temporarily, and as a backup for when you forget the main card at home, which i have done many times. The screen is also crazy bright which I love.
I told you that it’s a beast to set up. I have been flying mine for about a year and a half and there’s a lot to learn before you can put it up in the air. I like your preflight tutorial. After you’ve flown it for awhile it gets easier to get it ready quicker. I purchased a landing mode case and that makes it much quicker/easier to get it ready to fly without having to take it out of travel mode. Also I use Tmotor folding CF props and that makes it easier also to get up in the air. Keep up the good work.
Nice job! Billy. Save yourself the time and get a landing mode case. I know they cost alot and are big as f!!!! but makes the I2 that much more enjoyable. Thanks for sharing!
You are gonna fly this bird eventually, right? Prep and flight is already old news but videos from the field sure are more interesting. It's a big bird though, tough to just go and fly somewhere like you can with the phantom.
Don't and never will own an Inspire, but still enjoyed your video. As others have alluded, my Inspire ownership will be vicariously experienced through your videos. But remember, the meat of your viewership does not own multi-thousand dollar, high-end drones. We're Spark, Mavic and Phantom pilots. So don't ignore us by producing only videos about your new toy.
Billy I’m so jealous. I’ll never buy one but will continue to watch all your videos. Getting pumped up on the Mavic 2 release. Think I might order the pro.
I am following, & enjoying your work on DJDRONE, keep up the great work. I always learn something, even if I am just a new Spark owner, I have some catching up to do
Hi guys, Please help me..My inspire 2 recently crash out of the blue & it was clearly a Manufacturing defect..The DJI guys are giving reasons & not responding well..My drone can't be turned ON then too I have extracted the flight records & sent to the DJI ..they are asking for a MCDat file which I can't see at my end and no video cache file is available as I wasn't recording at that time..Please help me it has been 3 months I am struggling..Also plz tell me whether the MCDat file & video cache file are related and whether they are really required to analyse the cause of accident
Never let the landing gear transform when it’s on a surface because it causes unnecessary stress. Pick the drone up instead to do it. Get the Cendence with patch antenna - it by far provides the best range and signal. The stock antenna are pretty poor. Also, a CS will come in handy, but don’t get the UB version (it has issues).
I’ll be living vicariously through your upcoming videos of this one. (❤️_❤️) it’s so shiny. Those connectors look very small and would concern me. Hopefully they thought about adding some reverse polarity protection in case someone does tap some pins together. I’m positive(+) (ha-ha) ;) that they did.
Nice video Billy but one thing you should have mentioned or maybe you don't know but the batteries need to be used in pairs and also paired in the software. So A/A, B/B etc..... Can't wait to see some killer video from that bad boy!
Does anyone know what is going on with the inspire 2 you can't record on the sd card anymore and it keeps telling me my avoidance sensors are not working but they do work I have update it 4 times and calibrated every thing and I also calibrated my crystal sky. I have done everything I could when I get time it started this with the new update I only flown it 4 times and they were only 10 minute flights. This is my 2nd one the first one flew off after I got it back from dji I told them I have never been able to use any footage from it and it would not go more than 5 hundred ft and I sent them the video and clearly you can see that I didn't touch the controller at all only pause and return home and this is with a cendence remote can anyone tell me what is going on. I don't bother talking to dji they have no idea of what they are talking about it's a waste of time their so dumb it's incredible.
Cmon Billy, fly with that thing and show us some footage, flying possibilities on the field. This same videos starting to be boring because you only talk about this drone and still no real action. NHF mate
Hey Billy, Great setup video brother. Since I have 2 Inspires and have had some experience with the Gimbal Plate, If I may add a bit of advice to your camera check, When mounting the camera and checking to be certain that it is secure, I recommend that you hold the Gimbal mount Plate steady, It's mounted to the bracket with those rubber dampening buttons. Large movements of the Gimbal Plate to the full allowable travel of the dampening rubber mounts can possibly cause the ribbon cable between the camera gimbal mount and the circuit board to come "unplugged" from the camera gimbal connector. This will cause your camera to not function and you'll spend hours trouble shooting as to why the camera no longer works and won't find the reason unless you remover the entire gimbal mount plate assy from the bottom of the aircraft and make sure the ribbon cable is secure. So it's a good idea to hold the mount plate steady when putting pressure on the gimbal and not let it move around much. During normal flight that plate moves very little and pretty much never travels to it's full range of motion. I had this happen on one of my Inspires and I went nuts trying to trouble shoot why the camera stopped working.
The rest of your steps are spot on and almost step by step match what I do each time I fly the Inspire. Awesome Video... ! ! !
If ur ever up for it, I highly recommend investing in a crystal sky. I love mine (the midrange model). It makes everything so much better, plus it holds extra as cards for easy exporting temporarily, and as a backup for when you forget the main card at home, which i have done many times. The screen is also crazy bright which I love.
Straight and to the point while, simultaneously packed with vital information. Great job!! Looking forward to learning more before i get mine.
I told you that it’s a beast to set up. I have been flying mine for about a year and a half and there’s a lot to learn before you can put it up in the air. I like your preflight tutorial. After you’ve flown it for awhile it gets easier to get it ready quicker. I purchased a landing mode case and that makes it much quicker/easier to get it ready to fly without having to take it out of travel mode. Also I use Tmotor folding CF props and that makes it easier also to get up in the air. Keep up the good work.
Nice job! Billy. Save yourself the time and get a landing mode case. I know they cost alot and are big as f!!!! but makes the I2 that much more enjoyable. Thanks for sharing!
You are gonna fly this bird eventually, right? Prep and flight is already old news but videos from the field sure are more interesting. It's a big bird though, tough to just go and fly somewhere like you can with the phantom.
Thanks Billy very good setup video on the inspire 2
Thanks for walking us through the set-up process after you have some experience with it.
Nice video. Glad to see that people will be able to reference your video when doing it themselves
Don't and never will own an Inspire, but still enjoyed your video. As others have alluded, my Inspire ownership will be vicariously experienced through your videos. But remember, the meat of your viewership does not own multi-thousand dollar, high-end drones. We're Spark, Mavic and Phantom pilots. So don't ignore us by producing only videos about your new toy.
This is not the case. He makes vids of all DJI drones.
I have the I2 and I love it. It's awesome.
Billy I’m so jealous. I’ll never buy one but will continue to watch all your videos. Getting pumped up on the Mavic 2 release. Think I might order the pro.
Even if i don't own any dji drone,i love to see your tutorials and vids😀☺
I am following, & enjoying your work on DJDRONE, keep up the great work. I always learn something, even if I am just a new Spark owner, I have some catching up to do
Hi guys,
Please help me..My inspire 2 recently crash out of the blue & it was clearly a Manufacturing defect..The DJI guys are giving reasons & not responding well..My drone can't be turned ON then too I have extracted the flight records & sent to the DJI ..they are asking for a MCDat file which I can't see at my end and no video cache file is available as I wasn't recording at that time..Please help me it has been 3 months I am struggling..Also plz tell me whether the MCDat file & video cache file are related and whether they are really required to analyse the cause of accident
Never let the landing gear transform when it’s on a surface because it causes unnecessary stress. Pick the drone up instead to do it. Get the Cendence with patch antenna - it by far provides the best range and signal. The stock antenna are pretty poor. Also, a CS will come in handy, but don’t get the UB version (it has issues).
One day billy I’ll be re watching when i can afford this !! Still using mavic pro air and Spark lol
I’ll be living vicariously through your upcoming videos of this one. (❤️_❤️) it’s so shiny. Those connectors look very small and would concern me. Hopefully they thought about adding some reverse polarity protection in case someone does tap some pins together. I’m positive(+) (ha-ha) ;) that they did.
Never let it transform without holding it off the surface it's resting on, just a tip as the retract gear is less than rock solid.
Nice video Billy but one thing you should have mentioned or maybe you don't know but the batteries need to be used in pairs and also paired in the software. So A/A, B/B etc..... Can't wait to see some killer video from that bad boy!
Now we wait for the footage
Billy !!
1- Hi..
2-Why are You ISO.?
3-Like Your hair.
4-Do You only use Your Inspire 2 now.
5-Is it wort it.
6-Will You buy a phantom 5???
Have you had any issues of the loose propellers? On the front left?
More videos on this I will like to purchase one soon
How do people use a small iPhone screen with a 6k rig....
hmmmm. ive never had an issue connecting the camera while the drone is on or heard of anyone frying a camera
Nice machine!
Never raise the bird on a surface. Hold it while doing this. Keeps the arms in good shape much longer.
Another g8 vid
Do you regret this purchase?
Does anyone know what is going on with the inspire 2 you can't record on the sd card anymore and it keeps telling me my avoidance sensors are not working but they do work I have update it 4 times and calibrated every thing and I also calibrated my crystal sky. I have done everything I could when I get time it started this with the new update I only flown it 4 times and they were only 10 minute flights. This is my 2nd one the first one flew off after I got it back from dji I told them I have never been able to use any footage from it and it would not go more than 5 hundred ft and I sent them the video and clearly you can see that I didn't touch the controller at all only pause and return home and this is with a cendence remote can anyone tell me what is going on. I don't bother talking to dji they have no idea of what they are talking about it's a waste of time their so dumb it's incredible.
Anyone want to buy a used mavic pro? No crashes. Lots of additional accessories.
شكر 🙏💕 احسنت شرح جيد
as soon as I saw the size of the box I was done, lol.
Give me the money and I would love an Inspire 2 Lol
Cmon Billy, fly with that thing and show us some footage, flying possibilities on the field. This same videos starting to be boring because you only talk about this drone and still no real action. NHF mate
Oh yeah, the range is crap, worse than a Phantom or Mavic, the only solution is 2.4ghz circular polarized antennas with boosters
First